TIMBER WAS LEANING AGAINST THE RIB, EE WAS CLEANING OUT LOOSE COAL ON BOTTOM TO SET TIMBER. THE TIMBER AGAINST THE RIB, SLID DOWN STRIKING THE CITIM ON THE WRIST!
Cc #5: 38 MSHA citations Coal
Cc #5 has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Cc #5.
- Fatalities
- 0
- Total incidents
- 21
- Years on record
- 1998–2001
- Latest incident
- Jun 2001
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Cc #5 has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Cc #5 shows 76% of 99 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2001-06-18, 25 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR52
- ROOF BOLTER (SINGLE HEAD)9
- SHUTTLE CAR OPERATOR (STANDARD SIDE)9
Silica (quartz)
Last sampled: 2001-04-11, 25 years ago- CONTINUOUS MINER OPERATOR8
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2000-01-19, 26 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- CONTINUOUS MINER OPERATOR1
- ELECTRICIAN1
- ROOF BOLTER (SINGLE HEAD)1
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2001 | 65% | 34 |
| 2000 | 82% | 65 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2001 | 6.6 | 3 |
| 2000 | 4.4 | 9 |
Cc #5 recorded 44.26 reportable injury cases per 100 full-time workers in 2001.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2001 * | 44.26 | 39.84 | 0.000 |
| 2000 * | 21.94 | 19.20 | 0.000 |
- Catenary Coal Company 1998 to present
- 3-D Management Services Inc 1998 to 2001
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2002 | 0 | |
| 2001 | 26 | 201,800 |
| 2000 | 34 | 413,403 |
Cc #5 sits in Kanawha County, West Virginia, where the Census mining category is 1.9% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2002 Q1 | 0 | 0 | 0 | |
| 2001 Q4 | 0 | 0 | 0 | |
| 2001 Q3 | 5,053 | 0 | 0 | 0.0 |
| 2001 Q2 | 20,805 | 11 | 5 | 528.7 |
| 2001 Q1 | 19,328 | 3 | 1 | 155.2 |
| 2000 Q4 | 18,992 | 10 | 4 | 526.5 |
| 2000 Q3 | 19,241 | 5 | 1 | 259.9 |
| 2000 Q2 | 18,067 | 7 | 4 | 387.4 |
Show 1 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2000 Q1 | 16,619 | 1 | 1 | 60.2 |
Reportable incidents
21 on file2001 · 10 incidents
CROSSING SECTION TAILPIECE, FELL, STRIKING LT. FOREARM ON PIECE OF ANGLE IRON.
EE REACHED UP TO PULL A VENTILATION CURTAIN DOWN AND PULLED A MUSCLE IN HIS MIDDLE BACK.
WAS USING FORKLIFT TO MOVE RETRIEVER PARTS. RETRIEVER FOREARM FELL OFF PALLET, SO HE PICKED IT UP AND PUT IT BACK OPN THE PALLET, FELT SHARP PAIN IN BACK, IT WAS ABOUT 4 FT LONG AND ABOUT 1 00 LBS.
WHILE DRILLING ROOF A PIECE OF LOOSE ROCK DISPLACED STRIKING EMPLOYEE ON THE HAND.
REINJURED A PREVIOUS INJURY THAT OCCURRED ON 10-20-00. TWISTED HIS KNEE.
A PIECE OF ROCK 12" X 30" X 1' THICK FELL & HIT EE ON HEAD & SLID DOWN RIGHT SHOULDER.
EMPLOYEE WAS MOVING SHUTTLE CAR CABLE OUT OF ROADWAY AND A SPLICE BLEW UP IN HIS HAND BURNING BOTH HANDS.
HAD A PIECE OF ROCK ON TOP OF MINER EE WAS CLEANING IT OFF HE KICKED A PIECE OF ROCK AND KNEE CAME OUT OF PLACE.
RAN OVER ROCK IN ROADWAY, EMPLOYEE BOUNCED INTO CANOPY MASHED HAND BETWEEN HARD HAT AND CANOPY.
2000 · 8 incidents
EE WAS TAKING DOWN A CABLE NEAR THE CORNER OF A XCUT, WHEN A RIB ROLLED IN ON HIS LEGS.
EE WAS LIFTING JACK FOR BOLTING MACHINE.
EE WAS TIGHTENING BOLT WITH 3/4 DRIVE RATCHET. RATCHET SLIPPED AND HIT HAND BETWEEN MACHINE AND RATCHET.
INSTALLING SPRINGS ON MANTRIP DID NOT KNOW HIS BACK WAS HURT. BACK STARTED HURTING LATER.
A PIECE OF DRAW ROCK FELL AND HIT EMPLOYEE ON HEAD CAUSING HIS NECK TO BE SORE.
EE WAS WORKING ON HEAD JACK HOSE ON MINER AND A PIECE OF ROCK FELL STRIKING HIM ON ARM.
EMPLOYEE WAS OPERATING A SHUTTLE CAR AND WENT THROUGH A ROUGH AREA IN THE ROADWAY INJURING HIS BACK.
EE WAS BOLTING TOP. A BOLT BENT AND HE ACCIDENTLY PUSHED THE ROTATION LEAVER AND THE BOLT CAME AROUND AND STRUCK HIS HAND.
1999 · 2 incidents
EMPLOYEE WAS BOLTING TOP WHEN THE DRILL STEEL BENT OVER AND STRUCK HIS RIGHT HAND.
EMPLOYEE STATED THAT HE WAS CLEANING ALONG BELTLINE AND FELT PAIN IN HIS RIGHT ARM.
1998 · 1 incident
THE EMPLOYEE STATED THAT HE WAS USING A CABLE HANGER TO HANG ROOF BOLTER CABLE ONTO A METAL ROOF STRAP WHEN HE CUT HIS LEFT PALM.