Mining Incidents

CC04: 27 MSHA citations Metal/Non-Metal

Controlled by CRH PLC
Farmington, San Juan County, NM  ·  Abandoned
MSHA Mine ID: 2902266

CC04 has $3K in proposed MSHA penalties and $0 outstanding across 6 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at CC04.

Fatalities
0
Total incidents
2
Years on record
2006–2007
Latest incident
Oct 2007
Compliance record
MSHA citations since 2006
27
citations
4
significant & substantial
$2,714
proposed penalties
$2,626
paid to date
97% of proposed penalties paid to date, a $88 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
18
inspections on record
201
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 201 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

CC04 has $3K in proposed MSHA penalties and $0 outstanding across 6 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
27 assessments are final orders; 6 contested dockets.
Of $1K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2016-11-15.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
14.8%
significant & substantial
3.7%
high negligence or reckless
14.8%
reasonably likely or greater
14.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 11.1% low, 85.2% moderate, 3.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
13 citations taken to the federal commission · 48% of citations on record
  • Settled 12 · 92%
  • Stood as issued 1 · 8%
75%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
7%
Penalty reduction in decided contests
$1K proposed, $1K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2016-11-01.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2013-573M Settlement Manning 2013 $400 → $400
CENT 2007-222M Settlement Weisberger 2007 $252 → $240
CENT 2014-0223 Settlement Manning 2014 $200 → $200
CENT 2016-0337 Settlement Miller 2016 $176 → $100
CENT 2017-0054 Default Lesnick 2017 $134 → $134
CENT 2016-0424 Settlement Miller 2016 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2016-11-15, 9 years ago
25%
of limit-tested samples over the exposure limit
13
samples
4
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz41 over
  • Respirable dust, <.1mg9
Show the individual readings (13)
Date Contaminant Concentration Limit Conc / limit Occupation
2016-08-24 Quartz, respirable, >1% Qtz 0.33 0.22 1.50 Laborer, Bullgang
2016-11-15 Respirable dust, <.1mg 0 Crusher Oper/Worker
2016-11-15 Respirable dust, <.1mg 0 Laborer, Bullgang
2016-11-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-08-24 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-08-24 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2013-11-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-11-21 Respirable dust, <.1mg 0 Supervisor, Co. Official
2013-11-21 Quartz, respirable, >1% Qtz 0.22 1.72 0.13 Crusher Oper/Worker
2013-11-21 Quartz, respirable, >1% Qtz 0.25 0.29 0.86 Laborer, Bullgang
2007-12-19 Quartz, respirable, >1% Qtz 0.2 0.24 0.83 Supervisor, Co. Official
2007-12-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2007-12-19 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Consolidated Constructors, Inc. 2004 to 2026
  2. Oldcastle SW Group, Inc 2026 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2016 12
2015 7
2014 8
2013 8
2009 0
2008 7
2007 4
2006 7
2005 0
Source: MSHA quarterly employment and production, updated weekly.

CC04 sits in San Juan County, New Mexico, where the Census mining category is 7.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
San Juan County, New Mexico · Population 121,178
7.5%
Mining share of county employment
$53,020
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2016 Q4 421 1 0 2375.3
2016 Q3 2,848 1 1 351.1
2016 Q2 3,048 0 0 0.0
2016 Q1 3,551 2 0 563.2
2015 Q4 265 3 0 11320.8
2015 Q3 649 0 0 0.0
2015 Q2 2,080 0 0 0.0
2015 Q1 3,101 0 0 0.0
Show 24 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q4 3,659 2 0 546.6
2014 Q3 3,888 0 0 0.0
2014 Q2 2,383 0 0 0.0
2014 Q1 2,936 0 0 0.0
2013 Q4 3,019 8 1 2649.9
2013 Q3 2,786 0 0 0.0
2013 Q2 2,769 4 2 1444.6
2013 Q1 3,479 0 0 0.0
2009 Q3 0 0 0
2009 Q2 0 0 0
2009 Q1 0 0 0
2008 Q4 210 0 0 0.0
2008 Q3 1,331 0 0 0.0
2008 Q2 1,296 0 0 0.0
2008 Q1 1,095 0 0 0.0
2007 Q4 339 1 0 2949.9
2007 Q3 640 0 0 0.0
2007 Q2 760 0 0 0.0
2007 Q1 0 4 0
2006 Q4 1,136 0 0 0.0
2006 Q3 1,454 1 0 687.8
2006 Q2 1,000 0 0 0.0
2006 Q1 0 0 0
2005 Q4 0 0 0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2007 · 1 incident

2006 · 1 incident

August 10, 2006 NM · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
Consolidated Constructors, Inc. · Struck by... (Not Elsewhere Classified)

Employee was cutting the lagging, while laying down on the conveyor belt. The knife slipped and lacerated his left knee. The wound required sutures which will be removed in 10 days. The employee was released to "full duty" immediately.