Mining Incidents

Cleveland Plant #1177: 1 MSHA citation Metal/Non-Metal

Controlled by Arcosa, Inc
Cleveland, Liberty County, TX  ·  Abandoned
MSHA Mine ID: 4104567

Cleveland Plant #1177 has $127 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Cleveland Plant #1177.

Fatalities
0
Total incidents
3
Years on record
2006–2009
Latest incident
Mar 2009
Compliance record
MSHA citations since 2009
1
citations
1
significant & substantial
$127
proposed penalties
$127
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
10
inspections on record
97
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 97 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Cleveland Plant #1177 has $127 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$127
proposed penalties
$127
current assessed
$127
paid to date
$0
outstanding
1 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2009-10-14.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
100.0%
significant & substantial
0.0%
high negligence or reckless
100.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2009-10-15, 16 years ago
7
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg7
Show the individual readings (7)
Date Contaminant Concentration Limit Conc / limit Occupation
2009-10-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-10-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-11-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-11-15 Respirable dust, <.1mg 0 Bulldozer Operator
2006-11-15 Respirable dust, <.1mg 0 Dredge/Barge Operator
2006-11-15 Respirable dust, <.1mg 0 Laborer, Bullgang
2006-11-15 Respirable dust, <.1mg 0 Washer Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Trinity Materials, Inc. 2006 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2010 5
2009 7
2008 6
2007 7
2006 7
Source: MSHA quarterly employment and production, updated weekly.

Cleveland Plant #1177 sits in Liberty County, Texas, where the Census mining category is 2.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Liberty County, Texas · Population 97,993
2.0%
Mining share of county employment
$64,773
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2010 Q1 2,568 0 0 0.0
2009 Q4 4,363 1 1 229.2
2009 Q3 4,445 0 0 0.0
2009 Q2 4,605 0 0 0.0
2009 Q1 3,868 0 0 0.0
2008 Q4 3,376 0 0 0.0
2008 Q3 4,402 0 0 0.0
2008 Q2 4,323 0 0 0.0
Show 9 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q1 4,276 0 0 0.0
2007 Q4 3,983 0 0 0.0
2007 Q3 3,961 0 0 0.0
2007 Q2 4,972 0 0 0.0
2007 Q1 4,802 0 0 0.0
2006 Q4 4,537 0 0 0.0
2006 Q3 4,354 0 0 0.0
2006 Q2 3,088 0 0 0.0
2006 Q1 2,772 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2009 · 1 incident

March 18, 2009 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STEPPING OR KNEELING ON OBJECT
Trinity Materials, Inc. · Struck against stationary object

Employee stepped off plant staircase onto concrete pad, while stepping off the concrete pad, employee stepped onto gravel and twisted his left ankle. Employee was examined by doctor and was released to restricted duty.

2006 · 2 incidents

July 10, 2006 TX · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger HANDLING OF MATERIALS
Trinity Materials, Inc. · Contact with hot objects or substances

Employee was cutting out a wall on a classifier with a cutting torch when he heard a popping sound, he then stopped cutting and looked around to see where the popping sound had come from, he then heard a second pop, and felt a burning sensation on his right forearm and thumb. the plant manager drove the employee to hospital, where he was treated and release to work.

March 27, 2006 TX · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Unknown operator · Struck by falling object

Conveyor slipped off of sawhorses and fell on left leg resulting in a fracture.