Daleville Quarry Metal/Non-Metal

Working on 988 loader in maintenance shop.

While climbing a ladder he slipped and fell.

EE WAS WORKING ON A WISCONSIN ENGINE SHROUD. WHILE TIGHTING A 5/16 BOLT WITH A 3/8 DIVE RATCHET. THE RATCHET SLIPPED ON AND HE STRUCK THE EDGE OF THE METAL SHROUD.

EE WAS GRINDING ON STEEL BEAMS WITH SAFETY GLASS ON, WHEN A CHIP OF STEEL CAME FROM BEHIND. NOTE=EE WAS WEARING SAFETY GLASSES.

EE WAS DRILLING 1/4 DIA HOLE IN STEEL BEAM WITH SAFETY GLASS ON, WHEN STEEL CHIP FELL IN HIS EYE. NOTE: EE WAS WORKING OVERHEAD.

LIFTING A BLOCK TO PUT UNDER BUCKET FOR GREASING

SHOVELING DIRT TURNED WRONG WAY HURT BACK HAD MASSEL SPASIAMS.

EMPLOYEE WAS LIFTING STEEL BEAMS FOR TRANSPORT. WHEN BEAM STETTLED ITNO CHOKER CHAINS AND CRUSHED RIGHT THUMB.

WHILE ATTEMPTING TO LOOSEN ADJUSTING BOLTS THE IMPACT ADAPTER BROKE AND FRAGMENTS STRUCK HIS FOREARM.

EE WAS ATTEMPTING TO REMOVE A RIM & TIRE ASSEMBLY FOR REPAIR. WHEN REMOVING APPROX. 4TH LUG THE LOCK RING BLEW OFF THE RIM. THE LOCK RING MADE CONTACT WITH THE VICTIM ON THE RIGHT & LEFT LEG, THE RIGHT ARM AND SHOULDER AND THE CHEST. EE WAS THR9WN APPROX. 8' WHERE HE MADE CONTACT WITH AN ENGINE & CEMENT FLOOR.

VICTIM WAS ASSISTING TO REMOVE A TIRE. WHEN TIRE EXPLODED, HE WAS HIT IN THE EYES WITH DEBRIS.

WIND BLEW DOOR SHUT ON LOADER PINCHING HAND & FINGERS.

PULLING A LEVER ON THE FRONT END LOADER RESULTED IN AN INJURY TO HIS WRIST [TENDON].

PUSHING HOSE ON WATER FILTER ASSEMBLY.

HE WAS WELDING AND GRINDING WITH HIS HELMET LAYING ALONG SIDE OF HIM. WHE HE PUT HIS HELMET ON METAL CHIP FLEW IN HIS EYE.

WHILE LOADING EXCAVATOR BUCKET ON TRUCK & CHAINING IT TIGHT HE STRAINED HIS BACK.

FELL BACKWARDS WHILE PULLING BACK ON HYDRAULIC FLOOR JACK. LANDED WITH FULL WEIGHT ON LEFT WRIST.

SEIZURE

LIFTING A 4" PIECE OF STEEL TUBING.

COMING OFF OF LAST STEP OF SCAFFOLDING; HE CAME DOWN WRONG AND TWIDTED LEFT ANKLE.

WHILE WELDING WITH HELMET DOWN PIECT OF STEEL FELL OFF OF SIDE FRAME & STRUCK FOOT.

GRINDING PADS FOR 8813 WITH HAUL GRINDER.

WHEN USING A WIRE WHEEL EMPLOYEE WAS STRUCK IN LEFT EYE WITH SLAG. EMPLOYEE HAD WELDING HELMET IN PLACE AND USED EYE WASH TO TRY TO CORRECT THE SITUATION.

DRIVING CONCAVE LINER OUT OF CRUSHER.

PERFORMING TASK TO REMOVE WELD FROM BUCKET OF A BUCYRUS ERIE 88-B IN DOING SO FELL APPROX FOUR(4)FEET

WAS TAKING BINDER OFF LOWBOY TRAYLER WHEN IT SNAPPED OPEN HITTING EE ON SIDE OF THE FACE.

AIR ARCING WHILE AIR ARCING IN BACK OF TRUCK TR 24 IN CLOSED AREA. PIECE OF METAL CAME UP UNDER WELDING HELMENT. INTO RIGHT EYE HAD HELMENT ON OVAL UNIBOY DOWN AND CAME FROM UNDER HELMENT BY C LAIN.

MISTY WEATHER MADE CATWALK SLIPPERY. SLIPPED OFF CATWALK WHILE WORKING ON MACHINERY. LANDED ON HIS BACK, ON LARGE ROCKS.

WHILE USING A PORTABLE GRINDER ON A METAL TANK APIECE OF METAL GOT BEHIND WELDING HELMET AND STRUCK RIGHT EYE. BLURRED VISION AND FOEIGN OBJECT EMBEDDED IN EYE.

WELDING CRACK ON TELSMITH 66IN CRUSHER

PUTTING MUFFLERS AND EXG. ON TRUCK.

PULLING TRANSMISSON OUT OF FORD TRUCK WHEN SOMETHING FELL IN EYE.

REPAIRING PONY MOTOR ON 88-B SLIPPED ON CAT WALK ON LANDED ON KNEE.

BACK INJURY WHEN LIFTING 1" PLATE ONTO BUCKET.

LOADING SCRAP IRON ON TRAILER-WIND BLEW PIECE OF RUSTY IRON IN EYE.

REPARING AUTOMATIC OILER ON DRILL.

PLACING MAJ BARS ON SHOVEL BUCKET.

STEPPING OFF CRUSHER FRAME KNEE CAP GAVE OUT FILLED UP WITH FLUID.

PULLING BACK HEAD IN PART TRAILER

FUEL STOP CABLE ON UKE TRUCK WOULD NOT SHUT ENG OFF OPER THEN WENT TO ENG MANUEL SHOT DOWN ON FUEL PUMP WITH GLOVES ON OPER THEN PUSHED ON SHUT OFF CONTROL IN SO PUSHING HE SLIPPED OFF CONTROL FINGER CAME IN CONTACT WITH PULLY ON FUEL PUMP CUTTING IT OFF RIGHT INDEX FINGER