EE WAS USING A ROTARY JACKHAMMER TO DRILL HOES IN A ROCK WHEN HE LIFTED THE HAMMER UP OUT OF ONE OF THE HOLES, HE HURT HIS BACK.
Derringer Mine No 2: 7 reportable incidents Coal
MSHA sampling at Derringer Mine No 2 shows 100% of 10 respirable coal dust samples met the 1.5 mg/m3 standard, plus the mine's fatality, citation, and penalty record.
Watch this mine
Email me when a new MSHA incident is filed at Derringer Mine No 2.
- Fatalities
- 0
- Total incidents
- 7
- Years on record
- 1993–2000
- Latest incident
- Jan 2000
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.MSHA sampling at Derringer Mine No 2 shows 100% of 10 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2001-01-04, 25 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- HIGHWALL DRILL OPERATOR4
- CRANE OPER/DRAGLINE OPERATOR3
- BACKHOE OPERATOR2
Silica (quartz)
Last sampled: 2000-03-07, 26 years ago- HIGHWALL DRILL OPERATOR3
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2001-01-30, 25 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- CRANE OPER/DRAGLINE OPERATOR3
- BACKHOE OPERATOR2
- HIGHWALL DRILL OPERATOR1
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2001 | 100% | 2 |
| 2000 | 100% | 8 |
| Year | over PEL | samples |
|---|---|---|
| 2001 | 0% | 1 |
| 2000 | 0% | 5 |
- Coal Contractors Inc 1985 to 1992
- Coal Contractors (1991) Inc 1992 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2001 | 1 | |
| 2000 | 3 | 12,870 |
Derringer Mine No 2 sits in Luzerne County, Pennsylvania, where the Census mining category is 0.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2001 Q4 | 0 | 0 | 0 | |
| 2001 Q3 | 200 | 0 | 0 | 0.0 |
| 2001 Q2 | 68 | 0 | 0 | 0.0 |
| 2001 Q1 | 382 | 0 | 0 | 0.0 |
| 2000 Q4 | 933 | 0 | 0 | 0.0 |
| 2000 Q3 | 1,062 | 0 | 0 | 0.0 |
| 2000 Q2 | 1,444 | 0 | 0 | 0.0 |
| 2000 Q1 | 1,740 | 0 | 0 | 0.0 |
Reportable incidents
7 on file2000 · 1 incident
1998 · 2 incidents
WHILE WORKING ON REPLACING WIRE ROPE ON 4600 DRAGLINE, EE SLIPPED IN MUD & TWISTED HIS LEFT KNEE.
EMPLOYEE WAS REPLACIGN TEETH ON 4600 DRAGLINE BUCKET,WHEN HE LIFTED TOOTH ON,IT SLIPPED AND PINVHED HIS FINGER BETWEEN THE BASE AND THE TOOTH.
1997 · 1 incident
EE WAS ATTEMPTING TO FREE THE ROLLERS ON A ROTARY DRILL BIT BY STRIKING IT WITH A HAMMER. A PIECE OF STEEL BROKE OFF THE BIT AND BECAME LODGED IN HIS FINGER.
1995 · 2 incidents
EE WAS PERFORMING MAINTENANCE WORK ON 4600 DRAGLINE WHICH INVOLVED AN AMOUNT OF HEAVY LIFTING. HE EXPERIENCED PAIN IN HIS BACK BUT DID NOT MISS ANY TIME AT WORK UNTIL 8-23-95. AT THIS TIME HE DECIDED TO SEEK MEDICAL ATTENTION.
EMPLOYEE WAS WALKING ON SNOW COVERED TRACKS OF MACHINE WHEN HE SLIPPED & FELL LANDING ON HIS BACK & ELBOW.
1993 · 1 incident
EMPLOYEE WAS OPERATING 4600 DRAGLINE. DURING THE SHIFT HE WAS WALKING ON TRACKS OF MACHINE WHEN HE SLIPPED AND FELL AND LANDING ON LOWER BACK.