DURHAM SALES YARD has $902 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at DURHAM SALES YARD.
Fatalities
0
Total incidents
15
Years on record
1983–2002
Latest incident
Mar 2002
Compliance record
MSHA citations since 2000
10
citations
2
significant & substantial
$902
proposed penalties
$902
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
24
inspections on record
223
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 223 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
DURHAM SALES YARD has $902 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$902
proposed penalties
$902
current assessed
$902
paid to date
$0
outstanding
10 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2008-04-08.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2010 Q1
1,133
0
0
0.0
2009 Q3
1,176
0
0
0.0
2009 Q2
1,199
0
0
0.0
2009 Q1
1,179
0
0
0.0
2008 Q4
1,534
0
0
0.0
2008 Q3
1,893
0
0
0.0
2008 Q2
1,871
2
0
1068.9
2008 Q1
1,805
1
0
554.0
Show 32 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q4
1,979
0
0
0.0
2007 Q3
2,011
0
0
0.0
2007 Q2
2,004
0
0
0.0
2007 Q1
2,102
0
0
0.0
2006 Q4
2,059
0
0
0.0
2006 Q3
2,016
0
0
0.0
2006 Q2
2,098
0
0
0.0
2006 Q1
2,047
0
0
0.0
2005 Q4
1,697
1
0
589.3
2005 Q3
1,769
0
0
0.0
2005 Q2
1,791
0
0
0.0
2005 Q1
1,862
0
0
0.0
2004 Q4
1,831
0
0
0.0
2004 Q3
1,816
0
0
0.0
2004 Q2
1,827
0
0
0.0
2004 Q1
2,027
1
1
493.3
2003 Q4
2,478
0
0
0.0
2003 Q3
2,585
0
0
0.0
2003 Q2
3,761
1
0
265.9
2003 Q1
3,052
0
0
0.0
2002 Q4
3,016
0
0
0.0
2002 Q3
2,877
0
0
0.0
2002 Q2
2,388
2
1
837.5
2002 Q1
2,880
0
0
0.0
2001 Q4
3,011
0
0
0.0
2001 Q3
3,217
0
0
0.0
2001 Q2
3,639
0
0
0.0
2001 Q1
3,534
0
0
0.0
2000 Q4
2,585
2
0
773.7
2000 Q3
3,608
0
0
0.0
2000 Q2
3,187
0
0
0.0
2000 Q1
3,174
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
15 on file
2002 · 1 incident
March 21, 2002NC · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDTOOLS (NONPOWERED)
EMPLOYEE WAS HELPING DRIVE A CRUSHER BEARING HOUSING WITH A HAMMER AND WOODEN BOARD. WHEN THE BOARD WAS STRUCK WITH THE HAMMER, SOMETHING FLEW UP AND STRUCK HIS RIGHT EYE CAUSING A PUNCTURE.
1997 · 3 incidents
June 9, 1997NC · Metal/Non-Metalwelder (shop)MACHINERY
IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.
June 9, 1997NC · Metal/Non-Metalwelder (shop)MACHINERY
IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.
June 9, 1997NC · Metal/Non-Metalwelder (shop)MACHINERY
IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.
1992 · 1 incident
April 22, 1992NC · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorMACHINERY
WHILE SETTING TIMING ON JAW CRUSHER FEEDER HOLD BOUNCE WHEEL WITH BAR WHEN WHEEL STARTED IT WET IN OPPOSITE DIRECTION FROM WHAT WAS PLANNED CATCHING RING FINGER ON LEFT HAND.
1990 · 1 incident
June 20, 1990NC · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverHANDLING OF MATERIALS
HH HAD COTTEN OUT OF HIS TRUCK TO GO, TO MEN ROOM RETURNING TO TRUCK, TRUCK SITTING ON SLIGHT INCLINE, HE OPENED DOOR, PUT HAND UP TO PULL HIMSELF IN AND DOOR CLOSED ON HIS LEFT HAND MIDLE FI NGER.
1989 · 1 incident
April 25, 1989NC · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
HE WAS TIGHTENING ABOLT ON A MOTOR WHEN THE WRENCH SLIPPED AND HE FELL BACKWARDS. WHEN HE FELL HE STRUCK HIS RIGHT SIDE ON A 1 7/8 INCH BOLT ON JAW CRUSCHER AND FRACTURED THE 9TH RIB ON HIS RI GHT SIDE.
1983 · 2 incidents
August 25, 1983NC · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorHANDLING OF MATERIALS
WHEN THEY WENT TO MOVE A TREE THAT HAD BEEN CUT DOWN WITH A FRONT END LOADER A SMALL PIECE WAS STILL ATTACHED TO T HE TRUNK. WHEN PRESSURE WAS PLIED TO PICK UP THE PIECE BROKE & THE TREE FLEW AROUND & HIT HIM ON THE ANKLE. HIS ANKLE WAS FRACTURED IN 2 PLACES.
April 14, 1983NC · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
EMPLOYEE STATES THAT HE WAS HELPING FORMAN PULL CABLE TO HOOK UP TO TRACTOR TO PULL SCRAPER. CUT LEFT HAND.
For insurers, brokers, and safety consultants
The full compliance file on DURHAM SALES YARD
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.