Mining Incidents

East Valley: 46 MSHA citations Metal/Non-Metal

Controlled by CRH PLC
Yakima, Yakima County, WA  ·  Active
MSHA Mine ID: 4503744

East Valley has $16K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at East Valley.

Fatalities
0
Total incidents
5
Years on record
2016–2023
Latest incident
Apr 2023
Compliance record
MSHA citations since 2016
46
citations
6
significant & substantial
$15,788
proposed penalties
$12,107
paid to date
77% of proposed penalties paid to date, a $3,681 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2016
21
inspections on record
417
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 417 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

East Valley has $16K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$16K
proposed penalties
$12K
current assessed
$12K
paid to date
$0
outstanding
46 assessments are final orders; 1 contested dockets.
Of $4K in penalties contested before the Commission, $702 was upheld in final decisions.
As of the most recent assessment on 2026-05-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
13.0%
significant & substantial
4.3%
high negligence or reckless
13.0%
reasonably likely or greater
45.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 30.4% low, 65.2% moderate, 4.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 4% of citations on record
  • Settled 2 · 100%
84%
Penalty reduction in decided contests
$4K proposed, $702 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-09-02.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2025-0382 Settlement Young 2026 $4K → $702
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-05-07
0%
of limit-tested samples over the exposure limit
9
samples
3
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz5
  • Respirable dust, <.1mg4
Show the individual readings (9)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-05-07 Respirable dust, <.1mg 0 Shovel Operator
2026-05-07 Respirable dust, <.1mg 0 Front-end Loader Operator
2025-09-16 Quartz, respirable, >1% Qtz 0.34 1.79 0.19 Cleanup Man
2025-09-16 Quartz, respirable, >1% Qtz 0.15 Front-end Loader Operator
2025-09-16 Respirable dust, <.1mg 0 Shovel Operator
2020-06-03 Respirable dust, <.1mg 0 Front-end Loader Operator
2020-06-03 Quartz, respirable, >1% Qtz 0.31 Crusher Oper/Worker
2016-06-28 Quartz, respirable, >1% Qtz 0.26 1.51 0.17 Mechanic
2016-06-28 Quartz, respirable, >1% Qtz 0.16 1.37 0.12 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

East Valley recorded 0.00 reportable injury cases per 100 full-time workers in 2024.

Injury rate, 2024
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.77 and the all-US-mining average was 2.08 cases per 100 workers.
In Washington, metal and nonmetal mining averaged 2.90 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2024 * 0.00 0.00 0.000
2023 * 7.98 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
2017 * 17.22 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. CPM Development Corporation 2016 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 9
2025 9
2024 12
2023 13
2022 13
2021 11
2020 9
2019 11
2018 13
2017 13
2016 11
Source: MSHA quarterly employment and production, updated weekly.

East Valley sits in Yakima County, Washington, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Yakima County, Washington · Population 256,605
0.3%
Mining share of county employment
$68,015
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 5,193 2 0 385.1
2026 Q1 2,218 5 0 2254.3
2025 Q4 4,289 0 0 0.0
2025 Q3 4,224 0 0 0.0
2025 Q2 4,467 2 0 447.7
2025 Q1 3,029 0 0 0.0
2024 Q4 5,147 2 1 388.6
2024 Q3 5,560 4 1 719.4
Show 34 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 5,454 0 0 0.0
2024 Q1 7,228 8 0 1106.8
2023 Q4 6,830 0 0 0.0
2023 Q3 5,939 2 0 336.8
2023 Q2 6,169 0 0 0.0
2023 Q1 6,118 0 0 0.0
2022 Q4 5,615 5 2 890.5
2022 Q3 6,016 0 0 0.0
2022 Q2 7,567 3 1 396.5
2022 Q1 5,806 0 0 0.0
2021 Q4 5,832 0 0 0.0
2021 Q3 6,006 0 0 0.0
2021 Q2 6,329 1 0 158.0
2021 Q1 4,053 0 0 0.0
2020 Q4 6,140 0 0 0.0
2020 Q3 5,423 0 0 0.0
2020 Q2 3,434 4 0 1164.8
2020 Q1 3,195 0 0 0.0
2019 Q4 4,141 0 0 0.0
2019 Q3 5,884 0 0 0.0
2019 Q2 5,970 2 0 335.0
2019 Q1 3,666 0 0 0.0
2018 Q4 5,367 2 0 372.6
2018 Q3 4,386 0 0 0.0
2018 Q2 4,938 0 0 0.0
2018 Q1 5,898 0 0 0.0
2017 Q4 7,080 2 1 282.5
2017 Q3 6,441 0 0 0.0
2017 Q2 5,093 0 0 0.0
2017 Q1 4,616 0 0 0.0
2016 Q4 2,859 1 0 349.8
2016 Q3 6,964 0 0 0.0
2016 Q2 6,020 1 0 166.1
2016 Q1 0 0 0
No fatalities recorded at this mine.

Reportable incidents

5 on file

2023 · 1 incident

April 21, 2023 WA · Metal/Non-Metal miner, prospector, nec HANDLING OF MATERIALS
CPM Development Corporation · Struck by falling object

Prying up scraper to flip over to weld a chain tie down. While lifting scraper, scraper fell back on their right leg cutting their shin.

2020 · 1 incident

May 8, 2020 WA · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker HANDLING OF MATERIALS
CPM Development Corporation · Caught in, under or between a moving and a stationary object

Employee was tasked with straightening and resetting the bonnet on the Raptor 400 Standard cone crusher. EE then reached in with a hand to remove the rock and the angle iron pinched a thumb between the corner of the angle iron and side of the bonnet causing a laceration to the right thumb.

2017 · 2 incidents

October 31, 2017 WA · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker DISORDERS (REPEATED TRAUMA)
CPM Development Corporation · (Not Elsewhere Classified)

MSHA Recordable Shift for Hearing Loss; Right Ear. Final determination and review for the confirmed recordable shift was notified to the employer on 01/06/2018.

March 3, 2017 WA · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker HANDTOOLS (NONPOWERED)
CPM Development Corporation · Struck by... (Not Elsewhere Classified)

Employee was using a utility knife to cut a hole in a belt to put a rope through, in order to lace the belt back onto the conveyor. Utility knife slipped resulting in 1" laceration to left thigh.

2016 · 1 incident

June 21, 2016 WA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
CPM Development Corporation · Struck by... (Not Elsewhere Classified)

Operator was preparing to flip cutting edge on skid steer bucket, bolt started to spin in hole so operator tried to push pin back in square hole. Spinning bolt cut EE's left index finger resulting in 5 stitches. Operator was wearing gloves.