Using an angle grinder to prep the scalper lip for welding. During the process of grinding, the employee's safety glasses slid down EE's nose which resulted in debris going in EE's left eye.
RiverBend Turner Gravel: 122 MSHA citations Metal/Non-Metal
RiverBend Turner Gravel has $23K in proposed MSHA penalties and $0 outstanding across 4 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at RiverBend Turner Gravel.
- Fatalities
- 0
- Total incidents
- 20
- Years on record
- 1993–2021
- Latest incident
- May 2021
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.RiverBend Turner Gravel has $23K in proposed MSHA penalties and $0 outstanding across 4 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 3 · 100%
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEST20000455M | Settlement | Barbour | 2000 | $519 → $405 |
| WEST 2008-1198M | Settlement | Lesnick | 2009 | $414 → $414 |
| WEST 2008-1199M | Settlement | Lesnick | 2009 | $100 → $100 |
| WEST20010586M | Default | Barbour | 2002 | $55 → $55 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2021-04-23, 5 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Unlisted Particulate, respirable, <1% Qtz11
- Nuisance dust, respirable, <1% Qtz2
- Respirable dust, <.1mg2
Show the individual readings (15)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2021-04-23 | Respirable dust, <.1mg | 0 | Cleanup Man | ||
| 2020-05-19 | Unlisted Particulate, respirable, <1% Qtz | 0.17 | Bobcat Operator | ||
| 2016-03-29 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2016-03-29 | Unlisted Particulate, respirable, <1% Qtz | 0.2 | Bobcat Operator | ||
| 2016-03-29 | Unlisted Particulate, respirable, <1% Qtz | 0.17 | Crusher Oper/Worker | ||
| 2013-02-12 | Unlisted Particulate, respirable, <1% Qtz | 0.41 | Backhoe Operator | ||
| 2012-06-12 | Unlisted Particulate, respirable, <1% Qtz | 0.52 | Cleanup Man | ||
| 2012-06-12 | Unlisted Particulate, respirable, <1% Qtz | 0.48 | Crusher Oper/Worker | ||
| 2012-06-12 | Unlisted Particulate, respirable, <1% Qtz | 0.24 | Cleanup Man | ||
| 2004-10-06 | Unlisted Particulate, respirable, <1% Qtz | 0.2 | Crusher Oper/Worker | ||
| 2004-10-06 | Unlisted Particulate, respirable, <1% Qtz | 0.16 | Front-end Loader Operator | ||
| 2004-10-06 | Unlisted Particulate, respirable, <1% Qtz | 0.17 | Crusher Oper/Worker | ||
| 2004-10-06 | Unlisted Particulate, respirable, <1% Qtz | 0.54 | Front-end Loader Operator | ||
| 2001-05-03 | Nuisance dust, respirable, <1% Qtz | 0.79 | 10 | 0.08 | Crusher Oper/Worker |
| 2001-05-03 | Nuisance dust, respirable, <1% Qtz | 1.15 | 10 | 0.12 | Front-end Loader Operator |
RiverBend Turner Gravel recorded 0.00 reportable injury cases per 100 full-time workers in 2019.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2019 * | 0.00 | 0.00 | 0.000 |
| 2018 * | 9.30 | 0.00 | 0.000 |
| 2017 * | 9.13 | 0.00 | 0.000 |
| 2013 * | 0.00 | 0.00 | 0.000 |
| 2012 * | 8.79 | 8.79 | 0.000 |
| 2011 * | 0.00 | 0.00 | 0.000 |
| 2010 * | 0.00 | 0.00 | 0.000 |
| 2009 * | 0.00 | 0.00 | 0.000 |
- Turner Sand & Gravel Company 1950 to 1992
- Turner Gravel Inc 1992 to 2013
- RiverBend Materials 2013 to present
| Year | Employees |
|---|---|
| 2023 | 5 |
| 2022 | 7 |
| 2021 | 9 |
| 2020 | 11 |
| 2019 | 12 |
| 2018 | 12 |
| 2017 | 11 |
| 2016 | 9 |
| 2015 | 8 |
| 2014 | 8 |
| 2013 | 15 |
| 2012 | 16 |
| 2011 | 14 |
| 2010 | 16 |
| 2009 | 16 |
| 2008 | 19 |
| 2007 | 15 |
| 2006 | 12 |
| 2005 | 11 |
| 2004 | 8 |
| 2003 | 8 |
| 2002 | 8 |
| 2001 | 8 |
| 2000 | 10 |
RiverBend Turner Gravel sits in Marion County, Oregon, where the Census mining category is 0.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2023 Q2 | 171 | 0 | 0 | 0.0 |
| 2023 Q1 | 2,754 | 0 | 0 | 0.0 |
| 2022 Q4 | 169 | 0 | 0 | 0.0 |
| 2022 Q3 | 2,117 | 1 | 1 | 472.4 |
| 2022 Q2 | 3,645 | 0 | 0 | 0.0 |
| 2022 Q1 | 4,547 | 0 | 0 | 0.0 |
| 2021 Q4 | 4,151 | 0 | 0 | 0.0 |
| 2021 Q3 | 3,788 | 0 | 0 | 0.0 |
Show 86 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2021 Q2 | 4,350 | 4 | 0 | 919.5 |
| 2021 Q1 | 5,049 | 0 | 0 | 0.0 |
| 2020 Q4 | 4,570 | 1 | 0 | 218.8 |
| 2020 Q3 | 3,925 | 0 | 0 | 0.0 |
| 2020 Q2 | 5,212 | 2 | 0 | 383.7 |
| 2020 Q1 | 5,115 | 2 | 1 | 391.0 |
| 2019 Q4 | 5,122 | 0 | 0 | 0.0 |
| 2019 Q3 | 5,166 | 0 | 0 | 0.0 |
| 2019 Q2 | 5,697 | 1 | 0 | 175.5 |
| 2019 Q1 | 5,379 | 0 | 0 | 0.0 |
| 2018 Q4 | 4,813 | 1 | 0 | 207.8 |
| 2018 Q3 | 5,435 | 1 | 0 | 184.0 |
| 2018 Q2 | 5,687 | 0 | 0 | 0.0 |
| 2018 Q1 | 5,575 | 0 | 0 | 0.0 |
| 2017 Q4 | 4,746 | 1 | 0 | 210.7 |
| 2017 Q3 | 5,723 | 0 | 0 | 0.0 |
| 2017 Q2 | 6,053 | 2 | 1 | 330.4 |
| 2017 Q1 | 5,391 | 2 | 0 | 371.0 |
| 2016 Q4 | 4,864 | 0 | 0 | 0.0 |
| 2016 Q3 | 5,385 | 0 | 0 | 0.0 |
| 2016 Q2 | 4,591 | 0 | 0 | 0.0 |
| 2016 Q1 | 3,811 | 0 | 0 | 0.0 |
| 2015 Q4 | 4,295 | 0 | 0 | 0.0 |
| 2015 Q3 | 4,227 | 1 | 0 | 236.6 |
| 2015 Q2 | 4,200 | 0 | 0 | 0.0 |
| 2015 Q1 | 3,500 | 0 | 0 | 0.0 |
| 2014 Q4 | 4,287 | 1 | 0 | 233.3 |
| 2014 Q3 | 3,232 | 0 | 0 | 0.0 |
| 2014 Q2 | 4,111 | 0 | 0 | 0.0 |
| 2014 Q1 | 4,044 | 1 | 1 | 247.3 |
| 2013 Q4 | 6,313 | 3 | 1 | 475.2 |
| 2013 Q3 | 6,200 | 13 | 3 | 2096.8 |
| 2013 Q2 | 5,386 | 0 | 0 | 0.0 |
| 2013 Q1 | 5,370 | 10 | 1 | 1862.2 |
| 2012 Q4 | 6,228 | 0 | 0 | 0.0 |
| 2012 Q3 | 6,299 | 0 | 0 | 0.0 |
| 2012 Q2 | 5,738 | 3 | 1 | 522.8 |
| 2012 Q1 | 4,477 | 0 | 0 | 0.0 |
| 2011 Q4 | 7,011 | 0 | 0 | 0.0 |
| 2011 Q3 | 5,724 | 1 | 0 | 174.7 |
| 2011 Q2 | 4,596 | 0 | 0 | 0.0 |
| 2011 Q1 | 4,657 | 4 | 1 | 858.9 |
| 2010 Q4 | 5,505 | 0 | 0 | 0.0 |
| 2010 Q3 | 6,104 | 3 | 0 | 491.5 |
| 2010 Q2 | 5,159 | 0 | 0 | 0.0 |
| 2010 Q1 | 5,412 | 0 | 0 | 0.0 |
| 2009 Q4 | 7,052 | 2 | 0 | 283.6 |
| 2009 Q3 | 7,475 | 1 | 0 | 133.8 |
| 2009 Q2 | 7,213 | 3 | 0 | 415.9 |
| 2009 Q1 | 6,103 | 6 | 2 | 983.1 |
| 2008 Q4 | 7,984 | 0 | 0 | 0.0 |
| 2008 Q3 | 8,748 | 0 | 0 | 0.0 |
| 2008 Q2 | 7,742 | 3 | 0 | 387.5 |
| 2008 Q1 | 6,622 | 4 | 0 | 604.0 |
| 2007 Q4 | 8,153 | 0 | 0 | 0.0 |
| 2007 Q3 | 7,386 | 0 | 0 | 0.0 |
| 2007 Q2 | 8,503 | 0 | 0 | 0.0 |
| 2007 Q1 | 6,130 | 0 | 0 | 0.0 |
| 2006 Q4 | 7,502 | 11 | 0 | 1466.3 |
| 2006 Q3 | 4,826 | 0 | 0 | 0.0 |
| 2006 Q2 | 5,422 | 5 | 0 | 922.2 |
| 2006 Q1 | 4,712 | 0 | 0 | 0.0 |
| 2005 Q4 | 5,342 | 0 | 0 | 0.0 |
| 2005 Q3 | 4,549 | 7 | 0 | 1538.8 |
| 2005 Q2 | 5,427 | 0 | 0 | 0.0 |
| 2005 Q1 | 5,184 | 0 | 0 | 0.0 |
| 2004 Q4 | 3,192 | 6 | 0 | 1879.7 |
| 2004 Q3 | 3,117 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,979 | 3 | 0 | 754.0 |
| 2004 Q1 | 3,970 | 0 | 0 | 0.0 |
| 2003 Q4 | 4,715 | 3 | 0 | 636.3 |
| 2003 Q3 | 3,084 | 3 | 0 | 972.8 |
| 2003 Q2 | 2,747 | 0 | 0 | 0.0 |
| 2003 Q1 | 3,011 | 2 | 0 | 664.2 |
| 2002 Q4 | 3,693 | 0 | 0 | 0.0 |
| 2002 Q3 | 3,011 | 0 | 0 | 0.0 |
| 2002 Q2 | 4,057 | 0 | 0 | 0.0 |
| 2002 Q1 | 3,293 | 3 | 0 | 911.0 |
| 2001 Q4 | 5,128 | 0 | 0 | 0.0 |
| 2001 Q3 | 4,538 | 1 | 1 | 220.4 |
| 2001 Q2 | 5,213 | 1 | 0 | 191.8 |
| 2001 Q1 | 3,168 | 0 | 0 | 0.0 |
| 2000 Q4 | 4,835 | 0 | 0 | 0.0 |
| 2000 Q3 | 4,839 | 0 | 0 | 0.0 |
| 2000 Q2 | 4,434 | 0 | 0 | 0.0 |
| 2000 Q1 | 5,439 | 0 | 0 | 0.0 |
Reportable incidents
20 on file2021 · 1 incident
2018 · 1 incident
Operator performing a screen change, when the head of the bolt spun resulting in laceration to left index finger. Required 7 stitches. Full Duty Release.
2017 · 1 incident
Operator checking on a pump not discharging. Shut power off and removed the fill plug to wash out the mud. Hot slurry blew out and hit wrist, chest, neck and chin. Resulting in 2nd and 1st degree burns. Released to modified duty and given a prescription.
2014 · 1 incident
Changing drill bit in drill. Finger got caught in key and chuck. 1/22 limit use of right hand, wearing splint. Fracture to right index finger.
2012 · 1 incident
Using hand held grinder, wearing safety glasses. Grinding 1/4" steel.
2007 · 1 incident
Setting down hinged end of conveyor. While hooking up to it, employee walked up the belt end tipped back toward him and pinched his foot.
2005 · 1 incident
MAINTENANCE ON CRUSHER. 18" PIPE WRENCH KICKED BACK WHEN PRESSURE APPLIED. FACIAL CONTUSION/BRUISE.
2004 · 1 incident
Flame cutting a metal piece with cutting torch and a piece of slag fell and dropped into lap and burned inner right thigh and penis.
1997 · 2 incidents
EE WAS IN AUTO ACCIDENT PRIOR TO HIRE WHICH RESULTED IN BACK INJURY. LIFTING ROCKS AGGRAVATED BACK INJURY.
EE S VEHICLE HIT BY LOADER COMING DOWN HILL FROM CRUSHER TOO FAST IN HIGH GEAR NORMAL, USED FOR HIGHWAY.
1996 · 2 incidents
EE CAUGHT LEFT HAND BETWEEN CRUSHER LINERS CAUSING LACERATION TO LEFT RING FINGER.
EMPLOYEE MOVING ROCK DRILL ON AIR TRACK AND PULLING AIR COMPRESSOR ON HITCH. EQUIPMENT OVERSTEERED AND EMPLOYEES RIGHT LEG CAUGHT IN PINCH.
1994 · 6 incidents
EMPLOYEE DROPPED ROCK ON FOOT WHILE CLEANING OUT JAW OF CRUSHER.
EMPLOYEE HELPED TO PULL TOP OFF CRUSHER COMPLAINED OF SORE ARM SEVERAL DAYS LATER UNKNOWN IF PULLING OFF PLATE CAUSED AN INJURY & WE HAVE DENIED CLAIM AT THIS POINT WORKER LEFT LIGHT DUTY JOB 10-05 -94
EE CAUGHT LEFT HAND ON BOLT CAUSING A LACERATION WHILE REPLACING A SCREEN.
EMPLOYEE FELT MINOR BACK STRAIN WHEN LIFTING 40-50 LB. ROCK FROM GROUND TO PUT IN LOADER BUCKET.HE RETURNED TO WORK AT HIS USUAL TIME THE NEXT DAY.
EE RECEIVED SMALL CUT ON HEAD DROM ROCK WHILE OPERATING WELDER.
EE EXPERIENCED BROCNHIAL SPASMS CAUSED BY DUST.
1993 · 2 incidents
EE WAS BRACING SIDE BOARD WITH A 5 LB SLEDGE HAMMER TO STRAIGHTEN METAL RIBBING THAT HELPS HOLD SIDE BOARDS IN PLACE. ABOUT THE 5-6TH SWING HEAD OF HAMMER SNAPPED OFF STRIKING EE ON LEFT SIDE OF NOSE.
EE WAS CUTTING A RUBBER WIPER MATERIAL WITH A UTILITY KNIFE AND JABBED HIMSELF WITH THE KNIFE.