Mining Incidents

Gates Plant: 13 MSHA citations Metal/Non-Metal

Dolomite Group · Surface
Controlled by CRH PLC
ROCHESTER, Monroe County, NY  ·  Abandoned
MSHA Mine ID: 3000034

Gates Plant has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Gates Plant.

Fatalities
0
Total incidents
22
Years on record
1984–1997
Latest incident
Sep 1997
Compliance record
MSHA citations since 2000
13
citations
2
significant & substantial
$1,250
proposed penalties
$1,250
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
26
inspections on record
309
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 309 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Gates Plant has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
13 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2011-08-31.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
15.4%
significant & substantial
7.7%
high negligence or reckless
15.4%
reasonably likely or greater
23.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 23.1% low, 69.2% moderate, 7.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2009-04-22, 17 years ago
0%
of limit-tested samples over the exposure limit
13
samples
11
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz9
  • Nuisance dust, respirable, <1% Qtz2
  • Respirable dust, <.1mg2
Show the individual readings (13)
Date Contaminant Concentration Limit Conc / limit Occupation
2009-04-22 Quartz, respirable, >1% Qtz 0.55 1.19 0.46 Crusher Oper/Worker
2009-04-22 Quartz, respirable, >1% Qtz 0.29 1.51 0.19 Truck Driver
2009-04-22 Quartz, respirable, >1% Qtz 0.4 1.11 0.36 Cleanup Man
2002-07-18 Nuisance dust, respirable, <1% Qtz 0.33 10 0.03 Front-end Loader Operator
2002-07-18 Quartz, respirable, >1% Qtz 0.64 1.06 0.60 Crusher Oper/Worker
2002-07-18 Quartz, respirable, >1% Qtz 0.39 1.17 0.33 Truck Driver
2002-07-18 Quartz, respirable, >1% Qtz 0.19 0.97 0.20 Laborer, Bullgang
2002-07-18 Nuisance dust, respirable, <1% Qtz 0.33 10 0.03 Front-end Loader Operator
2001-07-26 Respirable dust, <.1mg 0 Mechanic
2001-07-26 Quartz, respirable, >1% Qtz 0.31 0.58 0.53 Front-end Loader Operator
2001-07-26 Quartz, respirable, >1% Qtz 0.73 0.76 0.96 Front-end Loader Operator
2001-07-26 Respirable dust, <.1mg 0 Crusher Oper/Worker
2001-07-26 Quartz, respirable, >1% Qtz 0.31 1.83 0.17 Mechanic
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Gates Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2000.

Injury rate, 2000
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 4.77 and the all-US-mining average was 5.64 cases per 100 workers.
In New York, metal and nonmetal mining averaged 5.24 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Dolomite Products Company Inc 1950 to 2000
  2. Dolomite Products Company Inc 2000 to 2002
  3. Dolomite Group 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2014 8
2013 10
2012 9
2011 9
2010 10
2009 9
2008 9
2007 7
2006 8
2005 8
2004 8
2003 7
2002 7
2001 8
2000 12
Source: MSHA quarterly employment and production, updated weekly.

Gates Plant sits in Monroe County, New York, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Monroe County, New York · Population 754,068
0.0%
Mining share of county employment
$74,409
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q3 3,235 0 0 0.0
2014 Q2 2,855 0 0 0.0
2014 Q1 1,256 0 0 0.0
2013 Q4 1,819 0 0 0.0
2013 Q3 3,072 0 0 0.0
2013 Q2 2,962 0 0 0.0
2013 Q1 1,499 0 0 0.0
2012 Q4 3,001 0 0 0.0
Show 51 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2012 Q3 2,573 0 0 0.0
2012 Q2 3,287 0 0 0.0
2012 Q1 1,548 0 0 0.0
2011 Q4 2,691 0 0 0.0
2011 Q3 4,009 1 0 249.4
2011 Q2 2,933 0 0 0.0
2011 Q1 938 0 0 0.0
2010 Q4 4,269 0 0 0.0
2010 Q3 4,671 0 0 0.0
2010 Q2 4,403 1 0 227.1
2010 Q1 2,174 0 0 0.0
2009 Q4 4,466 0 0 0.0
2009 Q3 5,326 0 0 0.0
2009 Q2 4,026 1 0 248.4
2009 Q1 1,778 0 0 0.0
2008 Q4 4,226 0 0 0.0
2008 Q3 4,871 0 0 0.0
2008 Q2 4,096 0 0 0.0
2008 Q1 1,965 0 0 0.0
2007 Q4 3,938 0 0 0.0
2007 Q3 4,678 0 0 0.0
2007 Q2 4,284 0 0 0.0
2007 Q1 2,287 0 0 0.0
2006 Q4 3,593 3 0 835.0
2006 Q3 4,222 0 0 0.0
2006 Q2 4,632 0 0 0.0
2006 Q1 2,680 0 0 0.0
2005 Q4 4,603 2 1 434.5
2005 Q3 4,865 0 0 0.0
2005 Q2 4,879 0 0 0.0
2005 Q1 2,573 1 0 388.7
2004 Q4 5,030 0 0 0.0
2004 Q3 5,285 0 0 0.0
2004 Q2 5,173 0 0 0.0
2004 Q1 3,443 0 0 0.0
2003 Q4 4,658 0 0 0.0
2003 Q3 5,911 0 0 0.0
2003 Q2 4,381 0 0 0.0
2003 Q1 1,960 0 0 0.0
2002 Q4 3,920 0 0 0.0
2002 Q3 4,350 1 0 229.9
2002 Q2 4,464 0 0 0.0
2002 Q1 2,793 0 0 0.0
2001 Q4 4,174 0 0 0.0
2001 Q3 4,412 0 0 0.0
2001 Q2 4,977 0 0 0.0
2001 Q1 3,487 0 0 0.0
2000 Q4 4,696 0 0 0.0
2000 Q3 7,828 0 0 0.0
2000 Q2 11,955 0 0 0.0
2000 Q1 6,809 3 1 440.6
No fatalities recorded at this mine.

Reportable incidents

22 on file

1997 · 2 incidents

September 3, 1997 NY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Dolomite Products Company Inc · Over-exertion (Not Elsewhere Classified)

EE WAS CLIMBING LADDER TO CONVEYOR, HE SLIPPED & TWISTED HIS KNEE. DR. REPORT SAID HE STRAINED LOWER BACK.

August 4, 1997 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Dolomite Products Company Inc · Over-exertion (Not Elsewhere Classified)

WHILE WORKING TO UNPLUG CRUSHER, FOOT SLIPPED & TWISTED HIS RIGHT ANKLE.

1996 · 1 incident

October 24, 1996 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion in lifting objects

DRIVER GOT OUT OF TRUCK TO MOVE ROCK IN ROAD ANDINJURED HIS BACK.

1995 · 3 incidents

November 13, 1995 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Dolomite Products Company Inc · Struck against a moving object

EMPLOYEE WAS CLIMBING A LADDER, 8 FT, UNDER THE PRIMARY CRUAHER WHEN HE LOST HIS HOLD AND FELL. HE LANDED ON HIS FEET AND THEN FELL TO THE GROUND, BREAKING BOTH ANKLES.

March 13, 1995 NY · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion (Not Elsewhere Classified)

HE WAS SLIDING A PIECE OF STEEL INTO THE CUTTING RACK WHEN HE TURNED FAST HE TWISTED HIS BACK. HE CONTINUED TO WORK UNTIL 4-18-95.

January 20, 1995 NY · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion in lifting objects

WHILE WORKING ON WATER PUMP IN QUARRY PUMPHOUSE, HE LIFTED A HEAVY OBJECT AND HURT HIS BACK.

1993 · 1 incident

January 14, 1993 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Caught in, under or between (Not Elsewhere Classified)

REMOVING BRAKE CHAMBER ON STOCK TRUCK. PINCHED FINGER BETWEEN BRAKE CHAMBER & WALKING BEAM & CUT OPEN INDEX FINGER.

1992 · 1 incident

April 14, 1992 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Dolomite Products Company Inc · Caught in, under or between a moving and a stationary object

USING GRINDER WHEEL PULLED BOLT AND HAND IN WHEEL

1990 · 2 incidents

February 6, 1990 NY · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Dolomite Products Company Inc · Fall onto or against objects

PULLING OUT DENT IN BODY OF QUARRY TRUCK WITH A YALE COM-A-LONG COME A LONG BROKE FELL BACK AND HIT HAND AND BACK ON FLOOR OF TRUCK.

January 11, 1990 NY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion in lifting objects

WHILE MOVING BARREL OF OIL. DEVELOPED A HERNIA.

1989 · 2 incidents

October 4, 1989 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Dolomite Products Company Inc · Struck by... (Not Elsewhere Classified)

WELDING AND CUTTING IN HOPPER STEEL IN LEFT EYE.

October 3, 1989 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Dolomite Products Company Inc · Struck by falling object

WHILE SETTING A STEEL PLATE PLATE WEDGED BETWEEN END WALLS OF BIN. WHEN TRIED TO RAISE PLATE NYLON STRAPS BROKE AND PLATE FELL OVER ONTO EE.

1988 · 4 incidents

September 6, 1988 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion (Not Elsewhere Classified)

AFTER MOVING A ROCK EMPL FELT PAIN IN BACK WHILE WALKING

May 4, 1988 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Dolomite Products Company Inc · Struck by flying object

WHILE PUSHING STOCK TRUCK THAT WAS STUCK LOOSE STONE HIT RIGHT EYE

March 31, 1988 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Struck by falling object

DRILL ROD DROPPED ON FOOT, BRUISED RIGHT FOOT.

March 22, 1988 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech FIRE
Dolomite Products Company Inc · Contact with hot objects or substances

BURN TO BACK SIDE LEFT ARM HOT SLAG CAUGHT SHIRT ON FIRE

1987 · 1 incident

May 12, 1987 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Dolomite Products Company Inc · Fall onto or against objects

WHILE WALKING D2WN STAIRS FELL HEAD FIRST ABOUT 6-8 FT DOWN HITTING FACE AND NECK ON RIM OF 50 GAL OIL DRUM.

1986 · 2 incidents

July 29, 1986 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Dolomite Products Company Inc · Struck by... (Not Elsewhere Classified)

SHOVELING STONE3DUST IN CRUSHER HOUSE GOT DUST IN EYE CAUSING INFECTION.

July 8, 1986 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Caught in, under or between (Not Elsewhere Classified)

WHILE REPLACING3HOIST PIN HOIST MECHANISM SHIFTED CAUSING PIN TO REACT & PINNING RIGHT HAND BETWEEN DUMP BODY & PIN.

1985 · 2 incidents

1984 · 1 incident

February 23, 1984 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech OTHER
Dolomite Products Company Inc · Bodily reaction, (Not Elsewhere Classified)

EMPLOYEE WAS BENDING OVER AND FELT A PAIN IN HIS BACK. HE WAS NOT LIFTING ANYTHING