Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Walworth Plant: 94 MSHA citations Metal/Non-Metal

Dolomite Group · Surface
Controlled by CRH PLC
Walworth, NY, Wayne County, NY  ·  Active
MSHA Mine ID: 3000035

Walworth Plant has $14K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Walworth Plant.

Fatalities
0
Total incidents
28
Years on record
1990–2024
Latest incident
Jul 2024
Compliance record
MSHA citations since 2000
94
citations
14
significant & substantial
$14,209
proposed penalties
$14,209
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Dolomite Group's full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
75
inspections on record
1,363
inspection hours
6.9
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
94 citations across 1,363 inspection hours.
Source: MSHA inspections data, updated weekly.

Walworth Plant has $14K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$14K
proposed penalties
$14K
current assessed
$14K
paid to date
$0
outstanding
94 assessments are final orders; 2 contested dockets.
Of $250 in penalties contested before the Commission, $100 was upheld in final decisions.
As of the most recent assessment on 2025-09-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
14.9%
significant & substantial
8.5%
high negligence or reckless
14.9%
reasonably likely or greater
47.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 22.3% low, 69.1% moderate, 8.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 2% of citations on record
  • Settled 1 · 50%
  • Vacated or withdrawn 1 · 50%
60%
Penalty reduction in decided contests
$250 proposed, $100 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2013-05-30.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2011-284M Withdrawal Moran 2012 $150 → $0
YORK 2013-154M Settlement Lesnick 2013 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2022-09-15, 3 years ago
15%
of limit-tested samples over the exposure limit
35
samples
26
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz204 over
  • Respirable dust, <.1mg9
  • Arsenic fumes3
  • Beryllium fumes3
Show the individual readings (75)
Date Contaminant Concentration Limit Conc / limit Occupation
2015-06-25 Quartz, respirable, >1% Qtz 0.99 0.98 1.01 Laborer, Bullgang
2009-05-20 Quartz, respirable, >1% Qtz 1 0.77 1.30 Cleanup Man
2009-05-20 Quartz, respirable, >1% Qtz 1.26 0.83 1.52 Crusher Oper/Worker
2006-04-19 Quartz, respirable, >1% Qtz 1.7 1.63 1.04 Crusher Oper/Worker
2022-09-15 Respirable dust, <.1mg 0 Cleanup Man
2022-09-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-09-15 Quartz, respirable, >1% Qtz 0.52 0.92 0.57 Utility Man
2022-09-15 Respirable dust, <.1mg 0 Truck Driver
2015-06-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-06-25 Respirable dust, <.1mg 0 Truck Driver
2015-06-25 Quartz, respirable, >1% Qtz 0.33 1.55 0.21 Crusher Oper/Worker
2015-01-27 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2015-01-27 Beryllium fumes 0 6 0.00 Welder, etc.
2015-01-27 Arsenic fumes 7.19 1500 0.00 Welder, etc.
2015-01-27 Copper fumes 0 300 0.00 Welder, etc.
2015-01-27 Zinc oxide fumes 0.02 10 0.00 Welder, etc.
2015-01-27 Vanadium fumes 0 50 0.00 Welder, etc.
2015-01-27 Nickel fumes 0 3 0.00 Welder, etc.
2015-01-27 Molybdenum fumes 0 20 0.00 Welder, etc.
2015-01-27 Manganese fumes 0 5 0.00 Welder, etc.
2015-01-27 Magnesium oxide fumes 0 20 0.00 Welder, etc.
2015-01-27 Lead fumes 0 450 0.00 Welder, etc.
2015-01-27 Iron oxide fumes 0.14 20 0.01 Welder, etc.
2015-01-27 Cobalt fumes 0 300 0.00 Welder, etc.
2015-01-27 Chromium, insoluble 0 3 0.00 Welder, etc.
2010-08-11 Quartz, respirable, >1% Qtz 0.43 0.61 0.70 Laborer, Bullgang
2010-08-11 Respirable dust, <.1mg 0 Truck Driver
2010-08-11 Quartz, respirable, >1% Qtz 0.37 0.78 0.47 Laborer, Bullgang
2010-08-11 Respirable dust, <.1mg 0 Cleanup Man
2009-05-20 Quartz, respirable, >1% Qtz 0.17 0.81 0.21 Crusher Oper/Worker
2009-05-20 Quartz, respirable, >1% Qtz 0.17 0.73 0.23 Cleanup Man
2009-05-20 Quartz, respirable, >1% Qtz 0.15 1.19 0.13 Cleanup Man
2006-04-19 Quartz, respirable, >1% Qtz 0.3 1.56 0.19 Crusher Oper/Worker
2006-04-19 Quartz, respirable, >1% Qtz 0.71 1.36 0.52 Truck Driver
2006-04-19 Quartz, respirable, >1% Qtz 0.47 1.69 0.28 Truck Driver
2003-04-29 Quartz, respirable, >1% Qtz 1.59 2.27 0.70 Cleanup Man
2003-04-29 Quartz, respirable, >1% Qtz 0.47 2.62 0.18 Crusher Oper/Worker
2003-04-29 Quartz, respirable, >1% Qtz 0.44 1.43 0.31 Truck Driver
2003-04-29 Quartz, respirable, >1% Qtz 0.22 1.26 0.17 Crusher Oper/Worker
2003-04-29 Quartz, respirable, >1% Qtz 0.38 1.64 0.23 Front-end Loader Operator
2003-01-08 Aluminum oxide fumes 0.01 10 0.00 Welder, etc.
2003-01-08 Quartz, respirable, >1% Qtz 0.17 1.29 0.13 Truck Driver
2003-01-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-01-08 Respirable dust, <.1mg 0 Bulldozer Operator
2003-01-08 Zinc oxide fumes 0.01 5 0.00 Welder, etc.
2003-01-08 Vanadium fumes 0.37 50 0.01 Welder, etc.
2003-01-08 Titanium dioxide fumes 0 10 0.00 Welder, etc.
2003-01-08 Nickel fumes 0 1 0.00 Welder, etc.
2003-01-08 Molybdenum fumes 0 10 0.00 Welder, etc.
2003-01-08 Manganese fumes 0.02 5 0.00 Welder, etc.
2003-01-08 Magnesium oxide fumes 0.08 10 0.01 Welder, etc.
2003-01-08 Lead fumes 2.7 150 0.02 Welder, etc.
2003-01-08 Iron oxide fumes 2.69 10 0.27 Welder, etc.
2003-01-08 Copper fumes 22.06 100 0.22 Welder, etc.
2003-01-08 Cobalt fumes 0.25 100 0.00 Welder, etc.
2003-01-08 Chromium, insoluble 0 1 0.00 Welder, etc.
2003-01-08 Cadmium oxide fumes 0.25 100 0.00 Welder, etc.
2003-01-08 Beryllium fumes 0 2 0.00 Welder, etc.
2003-01-08 Arsenic fumes 0.12 500 0.00 Welder, etc.
2003-01-08 Aluminum oxide fumes 0.01 10 0.00 Welder, etc.
2003-01-08 Zinc oxide fumes 0 5 0.00 Welder, etc.
2003-01-08 Vanadium fumes 0.12 50 0.00 Welder, etc.
2003-01-08 Titanium dioxide fumes 0 10 0.00 Welder, etc.
2003-01-08 Nickel fumes 0 1 0.00 Welder, etc.
2003-01-08 Molybdenum fumes 0 10 0.00 Welder, etc.
2003-01-08 Manganese fumes 0.08 5 0.02 Welder, etc.
2003-01-08 Magnesium oxide fumes 0.05 10 0.01 Welder, etc.
2003-01-08 Lead fumes 0.98 150 0.01 Welder, etc.
2003-01-08 Iron oxide fumes 1.53 10 0.15 Welder, etc.
2003-01-08 Copper fumes 8.46 100 0.08 Welder, etc.
2003-01-08 Cobalt fumes 0.25 100 0.00 Welder, etc.
2003-01-08 Chromium, insoluble 0 1 0.00 Welder, etc.
2003-01-08 Cadmium oxide fumes 0.12 100 0.00 Welder, etc.
2003-01-08 Beryllium fumes 0 2 0.00 Welder, etc.
2003-01-08 Arsenic fumes 0.25 500 0.00 Welder, etc.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Walworth Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In New York, metal and nonmetal mining averaged 2.08 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 4.85 0.00 0.000
2023 * 4.96 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Dolomite Products Company Inc 1950 to 2000
  2. Dolomite Products Company Inc 2000 to 2002
  3. Dolomite Group 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 21
2025 19
2024 16
2023 17
2022 16
2021 18
2020 17
2019 29
2018 28
2017 28
2016 27
2015 29
2014 28
2013 29
2012 30
2011 34
2010 30
2009 32
2008 33
2007 32
2006 29
2005 28
2004 28
2003 30
2002 26
2001 29
2000 30
Source: MSHA quarterly employment and production, updated weekly.

Walworth Plant sits in Wayne County, New York, where the Census mining category is 0.1% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Wayne County, New York · Population 91,128
0.1%
Mining share of county employment
$73,914
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 12,382 0 0 0.0
2026 Q1 8,955 0 0 0.0
2025 Q4 11,368 0 0 0.0
2025 Q3 12,459 3 0 240.8
2025 Q2 11,532 0 0 0.0
2025 Q1 8,784 0 0 0.0
2024 Q4 10,578 4 0 378.1
2024 Q3 11,819 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 10,589 4 0 377.8
2024 Q1 8,214 0 0 0.0
2023 Q4 9,670 1 0 103.4
2023 Q3 12,078 0 0 0.0
2023 Q2 10,852 2 0 184.3
2023 Q1 7,696 0 0 0.0
2022 Q4 9,119 2 0 219.3
2022 Q3 11,400 2 1 175.4
2022 Q2 11,862 0 0 0.0
2022 Q1 8,324 2 1 240.3
2021 Q4 8,732 0 0 0.0
2021 Q3 14,792 1 0 67.6
2021 Q2 14,051 0 0 0.0
2021 Q1 6,909 0 0 0.0
2020 Q4 9,888 0 0 0.0
2020 Q3 9,330 4 0 428.7
2020 Q2 9,241 0 0 0.0
2020 Q1 7,528 1 0 132.8
2019 Q4 2,378 0 0 0.0
2019 Q3 17,970 3 0 166.9
2019 Q2 19,754 0 0 0.0
2019 Q1 16,335 0 0 0.0
2018 Q4 15,830 3 0 189.5
2018 Q3 16,731 2 0 119.5
2018 Q2 18,617 0 0 0.0
2018 Q1 14,200 1 0 70.4
2017 Q4 15,817 0 0 0.0
2017 Q3 12,233 6 1 490.5
2017 Q2 18,745 0 0 0.0
2017 Q1 15,407 1 1 64.9
2016 Q4 14,532 0 0 0.0
2016 Q3 18,134 1 0 55.1
2016 Q2 19,133 0 0 0.0
2016 Q1 14,321 0 0 0.0
2015 Q4 15,346 1 0 65.2
2015 Q3 16,303 0 0 0.0
2015 Q2 18,281 1 0 54.7
2015 Q1 13,462 0 0 0.0
2014 Q4 14,264 0 0 0.0
2014 Q3 17,714 1 0 56.5
2014 Q2 17,932 0 0 0.0
2014 Q1 12,284 0 0 0.0
2013 Q4 13,807 0 0 0.0
2013 Q3 16,749 0 0 0.0
2013 Q2 15,861 1 0 63.0
2013 Q1 13,457 0 0 0.0
2012 Q4 14,899 0 0 0.0
2012 Q3 19,241 1 0 52.0
2012 Q2 18,110 0 0 0.0
2012 Q1 13,617 0 0 0.0
2011 Q4 14,877 3 0 201.7
2011 Q3 19,749 0 0 0.0
2011 Q2 21,816 0 0 0.0
2011 Q1 16,677 1 0 60.0
2010 Q4 15,712 0 0 0.0
2010 Q3 17,545 3 0 171.0
2010 Q2 17,328 0 0 0.0
2010 Q1 13,977 1 0 71.5
2009 Q4 15,591 0 0 0.0
2009 Q3 16,778 0 0 0.0
2009 Q2 16,477 5 2 303.5
2009 Q1 13,303 0 0 0.0
2008 Q4 15,101 1 0 66.2
2008 Q3 17,762 1 0 56.3
2008 Q2 17,367 0 0 0.0
2008 Q1 14,856 1 0 67.3
2007 Q4 15,836 0 0 0.0
2007 Q3 18,233 0 0 0.0
2007 Q2 19,252 0 0 0.0
2007 Q1 14,615 1 0 68.4
2006 Q4 15,800 0 0 0.0
2006 Q3 17,051 0 0 0.0
2006 Q2 15,944 0 0 0.0
2006 Q1 13,758 1 1 72.7
2005 Q4 15,534 0 0 0.0
2005 Q3 17,349 0 0 0.0
2005 Q2 16,884 0 0 0.0
2005 Q1 11,915 5 1 419.6
2004 Q4 15,863 0 0 0.0
2004 Q3 17,583 1 1 56.9
2004 Q2 17,735 0 0 0.0
2004 Q1 15,581 1 0 64.2
2003 Q4 14,810 0 0 0.0
2003 Q3 17,244 0 0 0.0
2003 Q2 18,875 0 0 0.0
2003 Q1 13,545 0 0 0.0
2002 Q4 15,890 0 0 0.0
2002 Q3 16,407 0 0 0.0
2002 Q2 16,056 0 0 0.0
2002 Q1 19,621 0 0 0.0
2001 Q4 15,891 3 1 188.8
2001 Q3 15,478 0 0 0.0
2001 Q2 19,271 0 0 0.0
2001 Q1 14,498 0 0 0.0
2000 Q4 14,995 2 0 133.4
2000 Q3 14,682 0 0 0.0
2000 Q2 15,280 5 3 327.2
2000 Q1 14,962 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

28 on file

2024 · 1 incident

July 23, 2024 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Dolomite Group · Fall onto or against objects

Employee was attempting to push a rock that was on the haul road. While doing so, the employee slipped and hit EE's chin on the rock.

2023 · 1 incident

September 6, 2023 NY · Metal/Non-Metal welder (non-shop) SLIP OR FALL OF PERSON
Dolomite Group · Over-exertion (Not Elsewhere Classified)

EE walking across parking lot and states right foot slid out from underneath EE and EE braced with EE's left foot to stop from falling. Bracing caused pain to left ankle, was sent to Urgent Care the following day. EE was put on light duty until EE could receive a follow up two weeks later. There was a break in the ankle and set to remain on light duty until end of September

2014 · 1 incident

January 16, 2014 NY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Dolomite Group · Fall to the walkway or working surface

worker was walking out of shop building onto gravel area that had patches of snow and ice. he slipped and fell and injured right leg.

2012 · 1 incident

May 7, 2012 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Dolomite Group · Struck by... (Not Elsewhere Classified)

Worker used grinder improperly and cut his hand, requiring stitches.

2011 · 1 incident

April 25, 2011 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Group · Caught in, under or between a moving and a stationary object

Worker installing V-belt pinched finger between V-belt and sheave. Finger was cut and tip of finger fractured.

2009 · 1 incident

September 15, 2009 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Group · Struck against stationary object

Mechanic adjusting fuel injector setting, while loosening lock-nut left middle finger struck adjacent rocker arm, causing laceration which required three stitches.

2008 · 1 incident

January 24, 2008 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Group · Struck by falling object

Mechanic was helping another mechanic set up a boring machine on a loader when a centering cone placed on the loader fell off the loader and struck the mechanic in the head, causing a cut requiring 5 stitches.

2006 · 3 incidents

December 5, 2006 NY · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
Dolomite Group · Over-exertion in lifting objects

Worker moving bronze bushing felt groin pain. Doctors review was inconclusive, then later determined to be hernia by another doctor. Worker was scheduled for and received surgery on December 27, and eligible to return to work immediately. Normal year end holiday work schedule was followed. Became Recordable Injury December 27 due to stitches.

September 27, 2006 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Dolomite Group · Fall onto or against objects

mechanic working under loader chipped tooth on steering cylinder

March 21, 2006 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Dolomite Group · Struck by... (Not Elsewhere Classified)

Mechanic was hammering to crimp on a battery cable, missed and struck his thumb. After several days worker decided to go to doctor, where x-ray revealed a fracture to thumb. We received notification of fracture at this point (3/28), creating a recordable injury.

2005 · 1 incident

June 8, 2005 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Dolomite Group · Struck by... (Not Elsewhere Classified)

EE attempting to clear feeder over scalping screen. He tried to dislodge stones with shovel. When stones let loose, shovel handle struck EE near mouth and nose area. Four stitches required to close cut near mouth.

2004 · 1 incident

March 1, 2004 NY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Dolomite Group · Struck by... (Not Elsewhere Classified)

Worker cutting belt with razor knife cut towards himself, slipped and cut his hand, requiring stitches.

2003 · 2 incidents

December 4, 2003 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Dolomite Group · Over-exertion (Not Elsewhere Classified)

MECHANIC TWISTED LOWER BACK WHILE LYING ON GROUND UNDER VEHICLE THAWING FROZEN AIR LINES. HAD EARLIER EXPERIENCED MINOR PAIN MOVING WELDER.

March 25, 2003 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Group · Over-exertion (Not Elsewhere Classified)

WIND CAUGHT TARP, PUSHING MECHANIC, WHO GRABBED TARP AND TWISTED SHOULDER.

2002 · 1 incident

2001 · 2 incidents

September 12, 2001 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Caught in, under or between (Not Elsewhere Classified)

LIFTING A SCREEN IN SCREEN ROOM, RIGHT THUMB BECAME CAUGHT (PINCHED) BETWEEN THE SCREEN & SCREENFRAME. TAKEN TO E.R. FOR SUTURES.

2000 · 2 incidents

1998 · 2 incidents

August 4, 1998 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Dolomite Products Company Inc · Struck against a moving object

WHILE DRIVING QUARRY TRUCK, HE REACHED AROUND THE SEAT AND HIT THE AIR CONDTIONER FAN. CUT TIP OF FINGER OFF

June 29, 1998 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Dolomite Products Company Inc · Fall from machine

SLIPPED ON RUNNING BOARD OF TRUCK, TORE LIGAMENTS IN RIGHT ANKLE.

1995 · 1 incident

July 17, 1995 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Struck by... (Not Elsewhere Classified)

WHILE WORKING ON FRONT END LOADER DRIVESHAFT, DRIVESHAFT TURNED AND CUT HIS THUMB. 4 STITCHES.

1994 · 1 incident

September 12, 1994 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion (Not Elsewhere Classified)

WHILE SHOVELING STONE HE STRAINED HIS BACK.

1993 · 2 incidents

June 8, 1993 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dolomite Products Company Inc · Over-exertion in lifting objects

SLIPPED WHILE REMOVING ENGINE COMPARTMENT PANEL.

1992 · 2 incidents

September 16, 1992 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dolomite Products Company Inc · Struck by... (Not Elsewhere Classified)

TRYING TO OPEN STUCK BIN GATE, PIECE OF RUST FROM BIN GATE DISLODGED AND WENT IN EYE.

1990 · 1 incident

October 6, 1990 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver IGNITION OR EXPLOSION OF GAS OR DUST
Dolomite Products Company Inc · Contact with hot objects or substances

CHECKING WATER IN RADIATOR OF TRUCK.IT WAS DARK AND HE USED HIS CIGARETTE LIGHTER FOR LIGHT .IT IGNITED FUMES.