Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

HANSEN PIT: 2 recorded fatalities Metal/Non-Metal

Salt Lake City, Salt Lake County, UT  ·  Active
MSHA Mine ID: 4202107

HANSEN PIT has $538K in proposed MSHA penalties and $3K outstanding across 11 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at HANSEN PIT.

Fatalities
2
Total incidents
54
Years on record
1996–2026
Latest incident
Jul 2026
Compliance record
MSHA citations since 2000
259
citations
52
significant & substantial
$538,257
proposed penalties
$491,486
paid to date
91% of proposed penalties paid to date, a $46,771 gap.
Source: MSHA violations data, updated weekly.
See Geneva Rock Products Inc's full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
82
inspections on record
2,173
inspection hours
11.9
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
259 citations across 2,173 inspection hours.
Source: MSHA inspections data, updated weekly.

HANSEN PIT has $538K in proposed MSHA penalties and $3K outstanding across 11 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$538K
proposed penalties
$495K
current assessed
$491K
paid to date
$3K
outstanding
255 assessments are final orders; 11 contested dockets.
Of $554K in penalties contested before the Commission, $429K was upheld in final decisions.
As of the most recent assessment on 2026-03-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
20.2%
significant & substantial
5.8%
high negligence or reckless
20.2%
reasonably likely or greater
69.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.0% low, 87.2% moderate, 5.1% high, 0.8% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
47 citations taken to the federal commission · 18% of citations on record
  • Settled 36 · 77%
  • Stood as issued 4 · 9%
  • Vacated or withdrawn 7 · 15%
55%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 31 decided S&S contests · industry: 79%
26%
Penalty reduction in decided contests
$583K proposed, $429K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2024-12-23.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2022-0097 Settlement Simonton 2025 $382K → $300K
WEST 2018-0562 Settlement Manning 2021 $71K → $56K
WEST 2018-0530 Settlement Manning 2021 $68K → $54K
WEST 2022-0149 Settlement Manning 2023 $11K → $5K
WEST 2024-0041 Settlement Young 2025 $10K → $10K
WEST 2023-0129 Settlement Manning 2023 $8K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-03-04
54%
of limit-tested samples over the exposure limit
39
samples
26
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz2614 over
  • Respirable dust, <.1mg13
Show the individual readings (39)
Date Contaminant Concentration Limit Conc / limit Occupation
2022-09-26 Quartz, respirable, >1% Qtz 0.3 0.22 1.36 Laborer, Bullgang
2013-07-10 Quartz, respirable, >1% Qtz 0.33 0.26 1.27 Oiler, Greaser
2013-07-10 Quartz, respirable, >1% Qtz 0.47 0.36 1.31 Crusher Oper/Worker
2011-01-19 Quartz, respirable, >1% Qtz 0.52 0.35 1.49 Crusher Oper/Worker
2010-10-07 Quartz, respirable, >1% Qtz 0.8 0.31 2.58 Oiler, Greaser
2010-10-07 Quartz, respirable, >1% Qtz 0.69 0.35 1.97 Crusher Oper/Worker
2008-07-23 Quartz, respirable, >1% Qtz 0.84 0.31 2.71 Crusher Oper/Worker
2008-07-23 Quartz, respirable, >1% Qtz 0.4 0.3 1.33 Crusher Oper/Worker
2008-07-23 Quartz, respirable, >1% Qtz 0.61 0.33 1.85 Laborer, Bullgang
2008-07-23 Quartz, respirable, >1% Qtz 0.68 0.34 2.00 Laborer, Bullgang
2007-05-01 Quartz, respirable, >1% Qtz 0.8 0.32 2.50 Laborer, Bullgang
2007-03-13 Quartz, respirable, >1% Qtz 1.26 0.29 4.34 Laborer, Bullgang
2007-03-13 Quartz, respirable, >1% Qtz 0.46 0.3 1.53 Laborer, Bullgang
2007-03-13 Quartz, respirable, >1% Qtz 0.64 0.29 2.21 Oiler, Greaser
2026-03-04 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2026-03-04 Quartz, respirable, >1% Qtz 0.14 0.3 0.47 Oiler, Greaser
2026-03-04 Respirable dust, <.1mg 0 Oiler, Greaser
2022-12-15 Respirable dust, <.1mg 0 Laborer, Bullgang
2022-09-26 Respirable dust, <.1mg 0 Bulldozer Operator
2019-03-06 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-03-06 Respirable dust, <.1mg 0 Truck Driver
2019-03-06 Respirable dust, <.1mg 0 Crusher Oper/Worker
2019-03-06 Quartz, respirable, >1% Qtz 0.31 0.34 0.91 Laborer, Bullgang
2014-07-01 Respirable dust, <.1mg 0 Bulldozer Operator
2014-07-01 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-08-13 Quartz, respirable, >1% Qtz 0.15 0.24 0.63 Crusher Oper/Worker
2013-08-13 Quartz, respirable, >1% Qtz 0.14 0.21 0.67 Oiler, Greaser
2013-07-10 Quartz, respirable, >1% Qtz 0.3 0.53 0.57 Oiler, Greaser
2011-03-09 Quartz, respirable, >1% Qtz 0.37 0.38 0.97 Crusher Oper/Worker
2011-01-19 Quartz, respirable, >1% Qtz 0.12 0.35 0.34 Oiler, Greaser
2010-10-07 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-10-07 Respirable dust, <.1mg 0 Front-end Loader Operator
2008-09-24 Quartz, respirable, >1% Qtz 0.15 0.26 0.58 Oiler, Greaser
2008-09-24 Respirable dust, <.1mg 0 Crusher Oper/Worker
2008-09-24 Respirable dust, <.1mg 0 Crusher Oper/Worker
2008-09-24 Quartz, respirable, >1% Qtz 0.15 0.3 0.50 Oiler, Greaser
2007-05-24 Quartz, respirable, >1% Qtz 0.22 0.35 0.63 Laborer, Bullgang
2007-05-24 Quartz, respirable, >1% Qtz 0.16 0.34 0.47 Laborer, Bullgang
2007-03-13 Quartz, respirable, >1% Qtz 0.35 0.38 0.92 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

HANSEN PIT recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Utah, metal and nonmetal mining averaged 1.89 cases per 100 workers that year.
Year total case rate days-away fatal
2025 0.00 0.00 0.000
2024 0.00 0.00 0.000
2023 3.58 0.00 0.000
2022 3.90 1.95 0.000
2021 1.64 1.64 1.643
2020 1.76 0.00 0.000
2019 0.00 0.00 0.000
2018 7.26 3.63 1.815
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Geneva Rock Products Inc 1994 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 47
2025 53
2024 57
2023 58
2022 55
2021 60
2020 58
2019 61
2018 56
2017 53
2016 46
2015 46
2014 53
2013 71
2012 70
2011 58
2010 27
2009 36
2008 34
2007 32
2006 33
2005 25
2004 24
2003 23
2002 22
2001 19
2000 18
Source: MSHA quarterly employment and production, updated weekly.

HANSEN PIT sits in Salt Lake County, Utah, where the Census mining category is 0.4% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Salt Lake County, Utah · Population 1,184,689
0.4%
Mining share of county employment
$94,658
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 41,702 0 0 0.0
2026 Q1 29,428 5 3 169.9
2025 Q4 31,853 0 0 0.0
2025 Q3 34,767 14 1 402.7
2025 Q2 32,412 0 0 0.0
2025 Q1 23,157 2 0 86.4
2024 Q4 30,343 0 0 0.0
2024 Q3 32,330 8 0 247.4
Show 97 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 31,584 0 0 0.0
2024 Q1 27,789 1 0 36.0
2023 Q4 27,974 0 0 0.0
2023 Q3 29,533 7 6 237.0
2023 Q2 26,772 0 0 0.0
2023 Q1 27,483 0 0 0.0
2022 Q4 22,915 6 1 261.8
2022 Q3 25,006 1 0 40.0
2022 Q2 29,570 0 0 0.0
2022 Q1 25,031 0 0 0.0
2021 Q4 33,054 10 1 302.5
2021 Q3 33,644 0 0 0.0
2021 Q2 29,054 24 5 826.0
2021 Q1 25,971 2 1 77.0
2020 Q4 28,413 1 0 35.2
2020 Q3 31,597 4 1 126.6
2020 Q2 29,220 0 0 0.0
2020 Q1 24,459 3 1 122.7
2019 Q4 30,455 0 0 0.0
2019 Q3 30,714 0 0 0.0
2019 Q2 30,015 0 0 0.0
2019 Q1 23,166 0 0 0.0
2018 Q4 26,581 0 0 0.0
2018 Q3 27,624 18 3 651.6
2018 Q2 30,767 8 4 260.0
2018 Q1 25,202 6 0 238.1
2017 Q4 30,462 0 0 0.0
2017 Q3 28,283 2 0 70.7
2017 Q2 27,747 0 0 0.0
2017 Q1 21,853 10 0 457.6
2016 Q4 24,598 0 0 0.0
2016 Q3 25,293 3 0 118.6
2016 Q2 24,788 0 0 0.0
2016 Q1 23,205 2 1 86.2
2015 Q4 23,353 0 0 0.0
2015 Q3 24,526 15 3 611.6
2015 Q2 24,627 0 0 0.0
2015 Q1 15,797 0 0 0.0
2014 Q4 24,556 3 0 122.2
2014 Q3 27,203 0 0 0.0
2014 Q2 31,398 0 0 0.0
2014 Q1 15,729 2 0 127.2
2013 Q4 28,475 0 0 0.0
2013 Q3 36,358 7 1 192.5
2013 Q2 33,787 0 0 0.0
2013 Q1 21,268 1 0 47.0
2012 Q4 38,583 0 0 0.0
2012 Q3 44,652 0 0 0.0
2012 Q2 37,257 2 0 53.7
2012 Q1 23,112 0 0 0.0
2011 Q4 27,132 3 0 110.6
2011 Q3 45,249 0 0 0.0
2011 Q2 33,468 2 0 59.8
2011 Q1 11,572 0 0 0.0
2010 Q4 11,858 6 1 506.0
2010 Q3 16,292 0 0 0.0
2010 Q2 11,263 0 0 0.0
2010 Q1 9,258 0 0 0.0
2009 Q4 15,980 4 0 250.3
2009 Q3 20,794 0 0 0.0
2009 Q2 18,412 0 0 0.0
2009 Q1 11,017 4 0 363.1
2008 Q3 17,835 4 4 224.3
2008 Q2 10,619 0 0 0.0
2008 Q1 17,546 0 0 0.0
2007 Q4 15,282 0 0 0.0
2007 Q3 13,476 0 0 0.0
2007 Q2 13,837 0 0 0.0
2007 Q1 16,754 9 3 537.2
2006 Q4 18,235 0 0 0.0
2006 Q3 18,334 1 0 54.5
2006 Q2 18,571 1 0 53.8
2006 Q1 17,014 0 0 0.0
2005 Q4 16,553 0 0 0.0
2005 Q3 18,177 0 0 0.0
2005 Q2 13,481 0 0 0.0
2005 Q1 6,767 0 0 0.0
2004 Q4 11,847 0 0 0.0
2004 Q3 16,211 6 0 370.1
2004 Q2 7,942 1 0 125.9
2004 Q1 3,992 6 1 1503.0
2003 Q4 13,581 0 0 0.0
2003 Q3 17,817 4 0 224.5
2003 Q2 7,133 0 0 0.0
2003 Q1 7,992 0 0 0.0
2002 Q4 14,328 12 0 837.5
2002 Q3 11,505 0 0 0.0
2002 Q2 8,991 0 0 0.0
2002 Q1 10,151 4 1 394.0
2001 Q4 20,875 0 0 0.0
2001 Q3 10,471 0 0 0.0
2001 Q2 9,982 3 1 300.5
2001 Q1 10,695 0 0 0.0
2000 Q4 12,828 0 0 0.0
2000 Q3 16,624 9 4 541.4
2000 Q2 13,810 0 0 0.0
2000 Q1 6,352 5 2 787.2

Fatalities at this mine

2 recorded
January 19, 2021 UT · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Geneva Rock Products Inc · Struck against a moving object

Haul truck driver was dumping material at dump site. Truck went over the dump site and overturned at the lower level. Crews responded and notified Emergency Response. First aid was provided until EMTs arrived.

March 14, 2018 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler Fatality · MACHINERY
Geneva Rock Products Inc · Struck by falling object

Placing a chute on a screen, the chute became lodged. The employee tried to dislodge the chute with a pry bar. EE was either hit by the chute or pry bar

Reportable incidents

52 on file (excluding fatalities above)

2026 · 1 incident

July 2, 2026 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Maintenance worker was cutting a belt with a razor knife and lacerated the middle finger on EE's right hand, which required three stitches.

2023 · 2 incidents

July 21, 2023 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler MACHINERY
Geneva Rock Products Inc · Struck by flying object

Miner was steam cleaning a piece of equipment when water/grease sprayed into right eye. Miner received medical examination to ensure no damage to eye after flushing.

May 22, 2023 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Miner was using a razor knife to cut belting material. Hand slipped and cut left index finger, requiring 11 stitches.

2022 · 2 incidents

June 2, 2022 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Geneva Rock Products Inc · Struck against stationary object

Mechanic was arriving to work site on personal motorcycle. When EE entered site and turned toward parking area, EE ran over gravel that had spilled on the road and lost control of bike. EE crashed and broke ribs and right collar bone.

January 25, 2022 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Miner was working on repairs when a piece of metal slipped from EE's hand and lacerated forefinger on right hand.

2020 · 1 incident

June 11, 2020 UT · Metal/Non-Metal lab technician HANDLING OF MATERIALS
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

sampling sand from the cone about halfway up and sank into wet sand getting stuck. reported injury 6/13/20

2018 · 3 incidents

September 18, 2018 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by flying object

A piece of bearing collar broke off after being hit by a hammer and punctured IW lower lip.2

August 14, 2018 UT · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by flying object

Shoveling dry screen deck when a rock came off the feed belt and hit IW's finger breaking it.

2017 · 2 incidents

November 22, 2017 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler MACHINERY
Geneva Rock Products Inc · Struck by powered moving object

checking for holes in a cone liner, as it was spinning, a section of the liner cut IW face

October 24, 2017 UT · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck against stationary object

Changing lowers on vsi, allen wrench slipped and the bolt head cut finger

2015 · 2 incidents

February 18, 2015 UT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Pounding wedges into place. Co worker missed wedge and sent a glancing blow on his lower back. Incorrect employee placement for job being performed.

February 18, 2015 UT · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Geneva Rock Products Inc · Struck against a moving object

Operating a different truck and felt that a different seat caused her to have back pain

2014 · 2 incidents

July 31, 2014 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Cutting a piece of belt for replacement and the knife slipped cutting his leg

July 29, 2014 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

moving a cutting edge. lacerated finger through glove

2013 · 4 incidents

October 26, 2013 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer STEPPING OR KNEELING ON OBJECT
Geneva Rock Products Inc · Struck against stationary object

Stepping from cab of dozer onto step. During work a rock had become stuck in the step which caused him to roll his ankle and foot.

October 25, 2013 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler MACHINERY
Geneva Rock Products Inc · Struck against stationary object

Changing a cutting edge and bolt was stuck. He used his hand to hold bolt instead of a wrench and when it spun it cut through glove lacerating his hand.

June 19, 2013 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Geneva Rock Products Inc · Struck against a moving object

running a dozer and while backing to make another push ran over a large rock jarring his back and neck

February 12, 2013 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Working a pin into leg of crusher with hammer, pin flipped back and hit employee in eye.

2012 · 3 incidents

November 29, 2012 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

Employee was walking and stepped into a hole and pulled his back.

May 30, 2012 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler POWERED HAULAGE
Geneva Rock Products Inc · Struck by falling object

a rock fell from a moving conveyor and struck him on the mouth chipping a tooth

February 6, 2012 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

sliding a screen across catwalk. the screen had a sharp piece of metal from vibration of shaker and he pushed it with his foot causing a very small puncture wound to his foot

2011 · 4 incidents

September 14, 2011 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler STEPPING OR KNEELING ON OBJECT
Geneva Rock Products Inc · Struck against stationary object

Checking screens on a wet shaker and stepped over a wash bay onto a j bolt which penetrated into shoe and slightly into foot.

August 18, 2011 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by falling object

Changing a roller on a conveyor. EE was holding the roller as the bolts were removed. When the last bolt was removed the roller, and co worker working above partially fell onto his shoulder and arm.

June 28, 2011 UT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator STEPPING OR KNEELING ON OBJECT
Geneva Rock Products Inc · Struck against stationary object

Stepping off of last step from Cat 380H loader and rolled ankle on a rock.

February 28, 2011 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

EE was replacing a screen cleaning bar when a piece of cutting edge bounced onto his finger smashing and cutting it.

2007 · 1 incident

August 15, 2007 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Holding a bolt with his fingers instead of a wrench and tried to spin it free with an air wrench cutting hand.

2006 · 4 incidents

October 27, 2006 UT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Geneva Rock Products Inc · Struck against a moving object

Employee was operating a loader that ran over a rock, he struck his head on the column in the loader.

October 20, 2006 UT · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Employee was pressing out a cone liner. Flanges broke & metal I-Beam flipped up & hit him in the jaw.

September 21, 2006 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Geneva Rock Products Inc · Over-exertion in lifting objects

Lifting a tail pulley with another employee - strained hip and leg.

August 25, 2006 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by flying object

Changing a ripper tooth on a dozer, employee was pounding the tooth into place and a small piece broke off and hit him in the chest impaling him about 1/2 inch.

2005 · 5 incidents

October 14, 2005 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

Replacing a belt, cutting along a template. Had to nail template to belt, missed and hit finger.

August 13, 2005 UT · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger HANDLING OF MATERIALS
Geneva Rock Products Inc · Over-exertion in lifting objects

Lifting electrical wires to hang on the side of a conveyor. Strained back while lifting.

June 8, 2005 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler NONPOWERED HAULAGE
Geneva Rock Products Inc · Over-exertion in pulling or pushing objects

Pulling cart with oxy-acetylene rig on it, felt a muscle pull.

April 23, 2005 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

Climbing off of loader, turned on last step and foot got caught twisting and breaking it.

2003 · 1 incident

January 9, 2003 UT · Metal/Non-Metal barge/boat/dredge/towbarge/towboat/leach operator, riverman, deck hand HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

WAS TYING AN AIRLINE BACK WITH TIE WIRE, LINE SLIPPED AND WIRE POKED HIM IN THE EYE. HAD REMOVED SAFETY GLASSES BECAUSE THEY WERE DUSTY.

2002 · 1 incident

April 18, 2002 UT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

HOLDING A PIECE OF STEEL TO PROTECT ADJACENT HYDRAULIC LINES FROM DRILL BIT, DRILL BOUND UP AND THE CORD WITH THE KEY CHUCK HIT HIM IN THE MOUTH CHIPPED A TOOTH.

2001 · 4 incidents

June 19, 2001 UT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Geneva Rock Products Inc · Struck by falling object

TAKING SHIV OFF OF CRUSHING CONE, CRANE LIFTED MOTOR AND SHIV FELL ONTO EMPLOYEE.

March 26, 2001 UT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator STEPPING OR KNEELING ON OBJECT
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

STEPPED OFF LOADER STEP AND ONTO A ROCK, ROLLED ANKLE.

March 26, 2001 UT · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator DISORDERS (REPEATED TRAUMA)
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

POSSIBLE CARPAL TUNNEL PRO LEM--USE OF IMPACT TOOLS, HAND TOOLS.

February 5, 2001 UT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Geneva Rock Products Inc · Struck by falling object

CLEANING UP USING A BOBCAT F/E LOADER, PIECE OF METAL FOLDED AS IT WAS BEING SCOOPED AND HIT OPERATOR ON THE KNEE.

2000 · 6 incidents

June 21, 2000 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler MACHINERY
Geneva Rock Products Inc · Over-exertion (Not Elsewhere Classified)

AIR ARC WELDING--EXCESSIVE SMOKE COMING OFF SITE--FLASH BURNS TO EYES.

March 28, 2000 UT · Metal/Non-Metal mine manager, mine foreman, mine owner OTHER
Geneva Rock Products Inc · Struck by flying object

WIND BLEW A PARTICLE INTO EYE.

January 26, 2000 UT · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator HANDLING OF MATERIALS
Geneva Rock Products Inc · Struck by falling object

PUTTING V-BELT ON THE FEEDER MOTOR, MOTOR BEING SUPPORTED BY BAR WHICH SLIPPED AND INPACTED FINGER.

1998 · 2 incidents

August 22, 1998 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Geneva Rock Products Inc · Struck by... (Not Elsewhere Classified)

SMALL PIECE OF BELT BEING CUT, KNIFE SLIPPED AND CUT WRIST.

1996 · 2 incidents

November 29, 1996 UT · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Geneva Rock Products Inc · Fall from machine

CLIMBING OUT OF LOADER- FOOT SLIPPED, CAUGHT HIMSELF WITH HAND AND FELT A PULL IN HIS BACK.

April 20, 1996 UT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Geneva Rock Products Inc · Struck against a moving object

TWO LOADERS STRUCK EACH OTHER- ONE BACKED INTO THE OTHER CAUSING INJURY.