JAMESVILLE QUARRY: 1 MSHA citation
Metal/Non-Metal
Jamesville,
Onondaga County,
NY
·
Abandoned
MSHA Mine ID: 3002869
JAMESVILLE QUARRY has $55 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at JAMESVILLE QUARRY.
- Fatalities
- 0
- Total incidents
- 7
- Years on record
- 1989–1996
- Latest incident
- Aug 1996
Compliance record
MSHA citations since 2000
0
significant & substantial
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 6 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
JAMESVILLE QUARRY has $55 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
1 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2000-03-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Workforce and production
Source: MSHA quarterly employment and production, updated weekly.
JAMESVILLE QUARRY sits in Onondaga County, New York, where the Census mining category is 0.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Onondaga County, New York · Population 471,611
0.1%
Mining share of county employment
$74,740
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
| Quarter |
Hours worked |
Citations |
S&S |
Per 1M hrs |
| 2000 Q1 |
448 |
1 |
0 |
2232.1 |
No fatalities recorded at this mine.
Reportable incidents
7 on file
1996 · 1 incident
August 2, 1996
NY · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDTOOLS (NONPOWERED)
Barrett Paving Materials Inc · Over-exertion in wielding or throwing objects
THE MINER BELIEVED, IT MIGHT HAVE HAPPEN WHEN HE WAS POUNDING ON A SIDE OF THE BIN BECAUSE MATERIAL WAS NOT FLOWING. HE REPORTED, TON 8-5 AND WENT TO HIS DR TO BE CHECKED. WAS NOT KIDNEY INFEC TION SO MUST HAVE BEEN INJURY.
1995 · 1 incident
Barrett Paving Materials Inc · Struck by... (Not Elsewhere Classified)
CUTTING SKIRT BOARD RUBBER AND THE UTILITY KNIFE SLIPPED OFF THE RUBBER AND WENT IN TO HIS RT. LEG.
1991 · 2 incidents
September 17, 1991
NY · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
HE WAS WASHING UNDER CONVEYOR WHEN SMALL STONE FELL & CUT INDEX FINGERS.
TIGHTENING THE HEAD DOWN A CRUSHER WITH CABLE AND LOADER. THE PROBLEM IS THAT A CHAIN INSTEAD OF CLEVIS WAS USED TO FASTEN CABLE TO PAYLOADER BUCKET. THE HEAD STOPPED, CHAIN BROKE AND THE CABL E FLEW AND CAUGHT HIM WHERE HE WAS STANDING WAS NOT A SAFE LOCATION.
1990 · 1 incident
June 11, 1990
NY · Metal/Non-Metal
welder (shop)
MACHINERY
Barrett Paving Materials Inc · Struck by... (Not Elsewhere Classified)
GRINDING PIECE OF STEEL,IT FELL OFF BENCH AND CAUGHT CORD.PULLED GRINDER OUT OF HAND,WHEEL CAME ACROSS BACK OF HAND.
1989 · 2 incidents
March 17, 1989
NY · Metal/Non-Metal
haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver
SLIP OR FALL OF PERSON
Barrett Paving Materials Inc · Fall onto or against objects
EMPLOYEE WAS HANDING WRENCHES TO ANOTHER EMPLOYEE WHO WAS ON CRUSHER CATWALK, EMPLOYEE SLIPPED ON ICY SURFACCE AND HIS HEAD HIT A SHARP PIECE OF V BELT GUARD UTTING HIS HEAD.
February 1, 1989
NY · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDLING OF MATERIALS
Barrett Paving Materials Inc · Struck by... (Not Elsewhere Classified)
EMPLOYEE WAS THROWING LARGE METAL BRACKETS AND CRUSHER TOOLS ON FLOOR OF STORAGE TRAILER WHEN A PIECE OF SCRAP METAL WAS CONTACTED MAKING IT COME UP AND STRICKING EMPLOYEE ON THE SIDE OF HEAD, EMPLOYEE RECEIVED A BRUISE ON THE SIDE OF HEAD.