Mining Incidents

Lippman Rip Rap: 6 MSHA citations Metal/Non-Metal

Woodbine, Dickinson County, KS  ·  Intermittent
MSHA Mine ID: 1401709

Lippman Rip Rap has $730 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Lippman Rip Rap.

Fatalities
0
Total incidents
2
Years on record
2021
Latest incident
Nov 2021
Compliance record
MSHA citations since 2009
6
citations
2
significant & substantial
$730
proposed penalties
$730
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2009
15
inspections on record
124
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 124 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Lippman Rip Rap has $730 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$730
proposed penalties
$730
current assessed
$730
paid to date
$0
outstanding
6 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2022-07-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
33.3%
significant & substantial
0.0%
high negligence or reckless
33.3%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-10-12, 8 years ago
0%
of limit-tested samples over the exposure limit
2
samples
1
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz1
  • Respirable dust, <.1mg1
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Occupation
2017-10-12 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-09-13 Quartz, respirable, >1% Qtz 0.19 0.85 0.22 Scraper Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Hamm Inc. 2009 to 2026
  2. Martin Marietta Materials, Inc. 2026 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 2
2024 2
2023 3
2022 3
2021 4
2020 3
2019 3
2018 5
2017 5
2012 3
2011 5
2010 5
2009 10
Source: MSHA quarterly employment and production, updated weekly.

Lippman Rip Rap sits in Dickinson County, Kansas, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Dickinson County, Kansas · Population 18,423
0.3%
Mining share of county employment
$67,982
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 726 0 0 0.0
2026 Q1 0 0 0
2025 Q4 137 0 0 0.0
2025 Q3 0 0 0
2025 Q2 25 0 0 0.0
2025 Q1 113 0 0 0.0
2024 Q4 0 0 0
2024 Q3 0 0 0
Show 41 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 696 0 0 0.0
2024 Q1 564 0 0 0.0
2023 Q4 0 0 0
2023 Q3 943 0 0 0.0
2023 Q2 1,386 0 0 0.0
2023 Q1 462 0 0 0.0
2022 Q4 1,566 0 0 0.0
2022 Q3 348 1 0 2873.6
2022 Q2 603 0 0 0.0
2022 Q1 554 0 0 0.0
2021 Q4 689 0 0 0.0
2021 Q3 2,533 0 0 0.0
2021 Q2 1,298 0 0 0.0
2021 Q1 1,558 0 0 0.0
2020 Q4 460 0 0 0.0
2020 Q3 102 0 0 0.0
2020 Q2 1,808 0 0 0.0
2020 Q1 138 0 0 0.0
2019 Q4 1,444 0 0 0.0
2019 Q3 302 0 0 0.0
2019 Q2 705 1 0 1418.4
2019 Q1 127 0 0 0.0
2018 Q4 459 0 0 0.0
2018 Q3 208 0 0 0.0
2018 Q2 283 0 0 0.0
2018 Q1 416 0 0 0.0
2017 Q4 975 0 0 0.0
2017 Q3 1,699 0 0 0.0
2017 Q2 416 0 0 0.0
2012 Q2 565 0 0 0.0
2012 Q1 242 0 0 0.0
2011 Q4 1,526 0 0 0.0
2011 Q3 2,910 0 0 0.0
2011 Q2 2,834 0 0 0.0
2011 Q1 525 0 0 0.0
2010 Q4 168 0 0 0.0
2010 Q3 2,454 0 0 0.0
2010 Q2 4,185 0 0 0.0
2010 Q1 1,483 0 0 0.0
2009 Q4 4,493 0 0 0.0
2009 Q3 6,266 4 2 638.4
No fatalities recorded at this mine.

Reportable incidents

2 on file

2021 · 2 incidents

November 30, 2021 KS · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Hamm Inc. · Over-exertion in lifting objects

An employee went to take a scoop of stemming rock and pulled a muscle in upper right thigh.

October 12, 2021 KS · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Hamm Inc. · Over-exertion (Not Elsewhere Classified)

The employee was stemming holes and while walking EE stepped off in a hole and strained left knee.