Mining Incidents

MA Planta Aguadilla: 73 MSHA citations Metal/Non-Metal

Controlled by Ricardo Cardona
Aquadilla, Aguadilla County, PR  ·  Active
MSHA Mine ID: 5400110

MA Planta Aguadilla has $14K in proposed MSHA penalties and $440 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at MA Planta Aguadilla.

Fatalities
0
Total incidents
29
Years on record
1987–2025
Latest incident
Sep 2025
Compliance record
MSHA citations since 2000
73
citations
31
significant & substantial
$14,486
proposed penalties
$14,046
paid to date
97% of proposed penalties paid to date, a $440 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
105
inspections on record
981
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 981 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

MA Planta Aguadilla has $14K in proposed MSHA penalties and $440 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$14K
proposed penalties
$14K
current assessed
$14K
paid to date
$440
outstanding
68 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-01-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
44.3%
significant & substantial
42.9%
high negligence or reckless
44.3%
reasonably likely or greater
71.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 5.7% low, 51.4% moderate, 42.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-01-10
0%
of limit-tested samples over the exposure limit
17
samples
11
limit-tested
Most sampled contaminants
  • Nuisance dust, total, <1% Qtz8
  • Respirable dust, <.1mg4
  • Nuisance dust, respirable, <1% Qtz3
  • Quartz, respirable, >1% Qtz1
Show the individual readings (17)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-01-10 Nuisance dust, total, <1% Qtz 0.39 10 0.04 Backhoe Operator
2024-01-10 Nuisance dust, total, <1% Qtz 1.73 10 0.17 Cleanup Man
2019-05-02 Unlisted Particulate, total, <1% Qtz 1.5 Backhoe Operator
2019-05-02 Quartz, respirable, >1% Qtz 1.3 Cleanup Man
2013-06-12 Nuisance dust, total, <1% Qtz 0.75 10 0.08 Utility Man
2013-06-12 Nuisance dust, total, <1% Qtz 0 10 0.00 Backhoe Operator
2013-06-12 Nuisance dust, total, <1% Qtz 0.72 10 0.07 Utility Man
2013-06-12 Nuisance dust, total, <1% Qtz 0.15 10 0.02 Truck Driver
2012-07-12 Nuisance dust, total, <1% Qtz 0.68 10 0.07 Cleanup Man
2012-07-12 Nuisance dust, total, <1% Qtz 0.97 10 0.10 Cleanup Man
2012-01-10 Respirable dust, <.1mg 0 Cleanup Man
2008-12-17 Nuisance dust, respirable, <1% Qtz 0.26 10 0.03 Cleanup Man
2005-07-21 Respirable dust, <.1mg 0 Cleanup Man
2004-06-02 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Cleanup Man
2004-06-02 Nuisance dust, respirable, <1% Qtz 0.13 10 0.01 Bulldozer Operator
2003-12-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
2003-12-08 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

MA Planta Aguadilla recorded 7.67 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
7.67
total case rate
7.67
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Puerto Rico, metal and nonmetal mining averaged 2.64 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 7.67 7.67 0.000
2024 * 6.74 6.74 0.000
2023 * 6.47 6.47 0.000
2022 * 6.97 6.97 0.000
2021 * 0.00 0.00 0.000
2020 * 16.23 16.23 0.000
2019 * 7.60 7.60 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Cantera Medina Inc 1950 to 2006
  2. Master Aggregates Toa Baja Corp Pta 6 Aguadilla 2006 to 2010
  3. Cantera Medina, Inc. 2010 to 2010
  4. Master Aggregates Toa Baja Corp. 2010 to 2014
  5. Mini Master Concrete Service Inc 2014 to 2017
  6. Master Concrete and Aggregates LLC 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 12
2025 13
2024 15
2023 13
2022 13
2021 14
2020 15
2019 14
2018 13
2017 10
2016 14
2015 14
2014 14
2013 14
2012 14
2011 15
2010 17
2009 21
2008 21
2007 20
2006 10
2005 17
2004 20
2003 12
2002 13
2001 12
2000 14
Source: MSHA quarterly employment and production, updated weekly.

MA Planta Aguadilla sits in Aguadilla Municipio, Puerto Rico, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Aguadilla Municipio, Puerto Rico · Population 54,486
0.0%
Mining share of county employment
$19,826
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 7,116 0 0 0.0
2026 Q1 5,426 0 0 0.0
2025 Q4 6,689 0 0 0.0
2025 Q3 5,761 0 0 0.0
2025 Q2 7,506 0 0 0.0
2025 Q1 6,115 1 0 163.5
2024 Q4 7,528 0 0 0.0
2024 Q3 8,449 0 0 0.0
Show 93 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 6,880 1 0 145.3
2024 Q1 6,834 2 1 292.7
2023 Q4 7,466 0 0 0.0
2023 Q3 7,697 0 0 0.0
2023 Q2 8,093 0 0 0.0
2023 Q1 7,658 0 0 0.0
2022 Q4 7,924 0 0 0.0
2022 Q3 6,757 0 0 0.0
2022 Q2 7,827 0 0 0.0
2022 Q1 6,200 1 1 161.3
2021 Q4 7,960 0 0 0.0
2021 Q3 6,936 0 0 0.0
2021 Q2 7,483 1 0 133.6
2021 Q1 6,922 2 0 288.9
2020 Q4 6,985 0 0 0.0
2020 Q3 8,038 0 0 0.0
2020 Q2 4,297 1 0 232.7
2020 Q1 5,332 0 0 0.0
2019 Q4 7,051 0 0 0.0
2019 Q3 7,325 0 0 0.0
2019 Q2 5,770 0 0 0.0
2019 Q1 6,179 0 0 0.0
2018 Q4 5,932 0 0 0.0
2018 Q3 6,467 0 0 0.0
2018 Q2 6,840 2 0 292.4
2018 Q1 5,007 0 0 0.0
2017 Q4 3,714 0 0 0.0
2017 Q3 1,200 0 0 0.0
2016 Q3 6,682 0 0 0.0
2016 Q2 6,920 0 0 0.0
2016 Q1 6,449 0 0 0.0
2015 Q4 5,301 0 0 0.0
2015 Q3 7,024 0 0 0.0
2015 Q2 7,041 0 0 0.0
2015 Q1 5,843 0 0 0.0
2014 Q4 7,024 0 0 0.0
2014 Q3 5,432 0 0 0.0
2014 Q2 6,887 1 0 145.2
2014 Q1 6,151 0 0 0.0
2013 Q4 6,366 0 0 0.0
2013 Q3 5,864 0 0 0.0
2013 Q2 6,163 1 0 162.3
2013 Q1 5,692 1 0 175.7
2012 Q4 5,948 0 0 0.0
2012 Q3 5,607 1 1 178.3
2012 Q2 6,403 0 0 0.0
2012 Q1 6,431 3 2 466.5
2011 Q4 6,697 0 0 0.0
2011 Q3 7,496 0 0 0.0
2011 Q2 7,496 0 0 0.0
2011 Q1 6,492 0 0 0.0
2010 Q4 6,065 1 0 164.9
2010 Q3 6,990 0 0 0.0
2010 Q2 7,976 0 0 0.0
2010 Q1 5,698 0 0 0.0
2009 Q4 6,354 4 2 629.5
2009 Q3 6,460 0 0 0.0
2009 Q2 3,438 0 0 0.0
2009 Q1 5,532 0 0 0.0
2008 Q4 8,322 0 0 0.0
2008 Q3 8,289 1 1 120.6
2008 Q2 10,294 0 0 0.0
2008 Q1 9,665 3 2 310.4
2007 Q4 9,525 0 0 0.0
2007 Q3 10,925 1 0 91.5
2007 Q2 11,235 0 0 0.0
2007 Q1 9,919 0 0 0.0
2006 Q4 9,623 0 0 0.0
2006 Q3 3,839 0 0 0.0
2006 Q2 3,779 2 1 529.2
2006 Q1 3,503 0 0 0.0
2005 Q4 7,261 1 0 137.7
2005 Q3 7,660 2 0 261.1
2005 Q2 6,180 3 3 485.4
2005 Q1 8,775 0 0 0.0
2004 Q4 7,454 0 0 0.0
2004 Q3 8,796 0 0 0.0
2004 Q2 10,192 6 4 588.7
2004 Q1 8,715 0 0 0.0
2003 Q4 8,572 5 4 583.3
2003 Q3 5,402 2 2 370.2
2003 Q2 5,691 0 0 0.0
2003 Q1 1,920 0 0 0.0
2002 Q4 5,680 3 2 528.2
2002 Q3 5,630 2 0 355.2
2002 Q2 5,668 4 1 705.7
2002 Q1 6,760 6 2 887.6
2001 Q4 5,720 1 0 174.8
2001 Q3 6,760 1 0 147.9
2000 Q4 4,660 0 0 0.0
2000 Q3 4,720 0 0 0.0
2000 Q2 5,499 1 0 181.9
2000 Q1 7,150 1 1 139.9
No fatalities recorded at this mine.

Reportable incidents

29 on file

2025 · 1 incident

September 22, 2025 PR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Master Concrete and Aggregates LLC · Struck by... (Not Elsewhere Classified)

On September 22, 2025, an individual entered the facility's parking lot and illegally stole an employee's vehicle. The individual took the wrong exit and headed toward the plant area. The employee confronted them but was struck in the back of the head with a drill found in the vehicle, causing a minor injury. The individual was later arrested in the nearby community.

2024 · 1 incident

2023 · 1 incident

February 2, 2023 PR · Metal/Non-Metal utility man, shift tech, service/dump truck operator MACHINERY
Master Concrete and Aggregates LLC · Struck by falling object

Employee was cleaning a continuous corridor to a vibrator screen, when an approximately 2-inch stone struck employee's right shoulder, causing a bruise.

2022 · 1 incident

February 18, 2022 PR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Master Concrete and Aggregates LLC · Struck by... (Not Elsewhere Classified)

While the employee was cutting a strap of employee's truck with a knife to replace an hydraulic hose, the thumb of employee's left hand was cut.

2020 · 2 incidents

September 11, 2020 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Master Concrete and Aggregates LLC · Struck against stationary object

Employee alleges that EE was tightening the oil tube bolts on the 320B excavator bucket. When EE was adjusting one of the Allen screws, the tool came loose causing the ring finger of EE's left hand to hit the metal, causing swelling in the finger.

July 14, 2020 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Master Concrete and Aggregates LLC · Fall onto or against objects

The employee alleges that while filling the truck's tank with diesel the hose of the air pump that draws diesel from the tank came loose, spreading diesel down the ladder, railings, and floor of the truck. When the employee tried to get down, EE slipped hitting EE's groin, thigh and knee on the right side of the body.

2019 · 1 incident

August 1, 2019 PR · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDLING OF MATERIALS
Master Concrete and Aggregates LLC · Caught in, under or between a moving and a stationary object

The employee received a small cut in left hand while making a movement of a tire of the backhoe loader. Employee received 5 stitches at a diagnostic and treatment center. Employee will return to work on August 9, 2019, as notified.

2016 · 1 incident

May 16, 2016 PR · Metal/Non-Metal rotary bucket excavator operator MACHINERY
Mini Master Concrete Service Inc · Struck against a moving object

The employee indicates a painful back and apparent pinched nerve, allegedly from operating the excavator 320. The employee was referred to Fondo del Seguro de Estado by a private doctor.

2015 · 1 incident

September 14, 2015 PR · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDLING OF MATERIALS
Mini Master Concrete Service Inc · Over-exertion in pulling or pushing objects

The employee was accommodating the Plant Conveyor Toughing of conveyor #6 (with an approximate weight of 10 to 15 lbs.). When he forcefully pushed to accommodate it into place, he felt discomfort in his neck and lower back.

2014 · 4 incidents

May 15, 2014 PR · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDLING OF MATERIALS
Master Aggregates Toa Baja Corp. · Struck against stationary object

The employee was opening the hatch on the back of the conveyor cover, pricked the thumb of right hand.

May 14, 2014 PR · Metal/Non-Metal dispatcher OTHER
Master Aggregates Toa Baja Corp. · Bodily reaction, (Not Elsewhere Classified)

The employee was walking in the office area and slipped, ee injured lower back and left hip.

April 28, 2014 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Master Aggregates Toa Baja Corp. · Over-exertion (Not Elsewhere Classified)

While the employee was taking out the starter of the truck, he made an undue force, causing him to injure his lower back.

January 8, 2014 PR · Metal/Non-Metal rotary bucket excavator operator MACHINERY
Master Aggregates Toa Baja Corp. · Struck against a moving object

Employee of the 600 excavator was referred "Fondo Del Seguro De Estado" for back pain.

2013 · 1 incident

October 1, 2013 PR · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Master Aggregates Toa Baja Corp. · Struck by... (Not Elsewhere Classified)

The employee going up the stairs of the conveyor belt, the belt slipped and pricking the middle finger of the right hand.

2010 · 1 incident

June 21, 2010 PR · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Cantera Medina, Inc. · Over-exertion (Not Elsewhere Classified)

The employee was cleaning with shovel under conveyor, when he felt pain in his back and hip & couldn't move.

2009 · 1 incident

November 9, 2009 PR · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Master Aggregates Toa Baja Corp Pta 6 Aguadilla · Struck by... (Not Elsewhere Classified)

EE was said that he was holding a nail with a wrench then he started hammering the wrench it slipped and hit between his left thumb and index finger. It caused a laceration and his hand to swell up.

2008 · 1 incident

June 28, 2008 PR · Metal/Non-Metal pumper SLIP OR FALL OF PERSON
Master Aggregates Toa Baja Corp Pta 6 Aguadilla · Fall onto or against objects

The employee was giving maintenance to the conveyor; he was standing in the hallway holding the interior part of the handrail of the conveyor. He got dizzy, falling on hallway, hitting his right leg and affecting the muscle of the thigh.

2006 · 1 incident

January 10, 2006 PR · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
Cantera Medina Inc · Caught in, under or between a moving and a stationary object

The employee was repairing the primary feeder chain. The chain was twisted. When he tried to straighten the chain, it was loose on the bottom. When it stretched, it moved trapping the little finger of the right hand against the sproket.

2004 · 1 incident

June 2, 2004 PR · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
Cantera Medina Inc · Struck by flying object

Angle iron fell on ground, bounced on rock acting as a see saw, hit person on chin causing cut at chin.

1998 · 2 incidents

September 11, 1998 PR · Metal/Non-Metal HANDLING OF MATERIALS
Cantera Medina Inc · Caught in, under or between (Not Elsewhere Classified)

EE WAS WORKING AT MILL #3 FRIDAY 10:30 AM. WHILE HELPING OTHER EE (CONTRACTOR) TO MOVE A MOTOR HIS RT HAND WAS CAUGHT AND SQUEEZED WITH CONSEQUENCES STATED BELOW, BROKEN FINGERS,10 STITCHES. A T TIME HE WAS WEARING SAFETY GLOVES. WAS REFERRED TO SAN CARLOS HOSPITAL, TREATED BY DR (ORTHOPEDICS)

February 18, 1998 PR · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Cantera Medina Inc · Struck by falling object

WHILE REPAIRING TIRE OF U-32 [WATER TRUCK], WHILE TAKING BOLTS OF TIRE THE SAME FELL ON HIS RIGHT LEG INJURING HIMSELF.

1997 · 1 incident

March 18, 1997 PR · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Cantera Medina Inc · Fall onto or against objects

EE WAS CLEANING #1 MILL AREA. HE LOST HIS BALANCE AND FELL DOWN KNOCKING HIS HEAD IN A METAL BANISTER. THE WOUND NEEDS 7 SURGICAL STITCHES.

1996 · 1 incident

September 24, 1996 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Cantera Medina Inc · Struck by... (Not Elsewhere Classified)

SINCE HE IS GIVING MAINTENANCE IN MILL 1 TRANSMISSION CASE HIT HIS HEART FINGER, LEFT HAND, RECEIVING A LITTLE INJURY.

1995 · 1 incident

April 26, 1995 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Cantera Medina Inc · Fall from machine

EE OPERATE THE TRACK DRILL MACHINE, WHEN HE GO TO GLIDE & FALL DOWN. HE WOUND HIS LEFT LEG & FOOT.

1994 · 1 incident

July 7, 1994 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STEPPING OR KNEELING ON OBJECT
Cantera Medina Inc · Struck against stationary object

HE WENT FOR THE FOOT STEP AND TURNED HIS FOOT.

1993 · 2 incidents

November 11, 1993 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Cantera Medina Inc · Fall from machine

EMPLOYEE WAS OPERATING AN EXCAVATOR (JD-690). HE WAS GETTING OFF THE EQUIPMENT, FELL TO GROUND, TWISTING LEFT ANKLE.

July 20, 1993 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Cantera Medina Inc · Struck against stationary object

EE MAINTENANCE MAN WAS TRYING TO START THE MOTOR OF THE DIESEL TANKS WHEN HE YANKED THE STARTED CORD HE HIT HIS RT ELBOW ON ANOTHER TANK

1988 · 1 incident

May 6, 1988 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Cantera Medina Inc · Over-exertion (Not Elsewhere Classified)

HE WAS WORKING NORMALLY AND GAVE A BACKACHE.

1987 · 1 incident

January 22, 1987 PR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Cantera Medina Inc · Over-exertion in lifting objects

HE WAS INSTALLING AN I BEAM ANDHURT HIS RIGHT HAND. WRONG LIFTING.