INJURED CLAIMS THAT WHILE TRAMMING 21S/C, SHUTTLE CAR IN ROADWAY 1BRK INBY BELT FEEDER, THE SHUTTLE CAR TRAVELED OVER HUMP IN ROADWAY, CAUSING HIS HEAD TO CONTACT MINE ROOF RESULTIN GIN ALLEDG E INJURY. IT SHOULD BE NOTED THAT INJURED IS ABOVE AVERAGE IN SIZE AND MAY HAVE HAD TROUBLE IN SMALL OPERATOR COMPARTMENT.
Mine No 1: 43 MSHA citations Coal
Mine No 1 has $5K in proposed MSHA penalties and $5K outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Mine No 1.
- Fatalities
- 0
- Total incidents
- 18
- Years on record
- 1996–2000
- Latest incident
- Aug 2000
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Mine No 1 has $5K in proposed MSHA penalties and $5K outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEVA20000062 | Settlement | Barbour | 2000 | $2K → $2K |
MSHA sampling at Mine No 1 shows 81% of 57 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2000-09-26, 25 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR25
- SHUTTLE CAR OPERATOR (STANDARD SIDE)7
- SCOOP CAR OPERATOR4
Silica (quartz)
Last sampled: 2000-08-30, 25 years ago- CONTINUOUS MINER OPERATOR6
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2000-02-28, 26 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- SCOOP CAR OPERATOR1
- SHUTTLE CAR OPERATOR (STANDARD SIDE)1
Mine No 1 recorded 12.57 reportable injury cases per 100 full-time workers in 2000.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.- R C O Enterprises Inc 1995 to 1998
- Southern Gold Mining Inc 1998 to 2000
- K & J Energy Inc 2000 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2000 | 30 | 265,890 |
Mine No 1 sits in Wyoming County, West Virginia, where the Census mining category is 11.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2000 Q4 | 640 | 0 | 0 | 0.0 |
| 2000 Q3 | 22,953 | 7 | 1 | 305.0 |
| 2000 Q2 | 21,439 | 17 | 4 | 792.9 |
| 2000 Q1 | 18,599 | 18 | 5 | 967.8 |
Reportable incidents
18 on file2000 · 4 incidents
INJURED CLAIMS THAT WHEN HE WAS RAISING UP TO MANOVER MACHINE THAT HE HIT HEAD ON TOP, TWISTED KNEE, FELL BACKWARDS STRIKING ELBOW ON ROCK, INJURED LOWER BACK AND FELT PAIN IN NECK.
INJURED WAS TRAMMING ROOF BOLT MACHINE WHEN A PIECE OF ROCK APPROX. 2' X 2' X 0-6" THICK FELL FROM ROOF, STRIKING HIM WHILE HE WAS IN DECK OF MACHINE TRAMMING IT TO NEXT WORKING PLACE.
INJURED CLAIMS THAT WHILE OPERATING SHUTTLE CAR, HE HIT A HOLE IN ROADWAY CAUSING SUDDEN BOUNCE OF SHUTTLE CAR WHICH IN TURN CAUSED BACK PAIN.
1999 · 6 incidents
EE WAS OPERATING BOLTER ON HIS KNEES IN DECK, HIS RIGHT FOOT WAS OUTSIDE DECK. HIS RIGHT FOOT WAS CAUGHT BETWEEN BOLTER DECK, MAIN FLOOR AND RIB. BRUISED AND BROKE A COUPLE OF SMALL BONES IN R IGHT FOOT.
ELECTRICIAN USING TORCH & A PIECE OF HOT SLAG HIT IN CORNER OF RIGHT EYE Y
DEFECTIVE CATHEAD STARTED BURNING WORKER TYPE TO DENGLIZA BREAK AND ARCH FROM CATHEAD BURNT EYE.
A PIECE OF DRILL STEEL WAS HUNG UP IN TOP. SHOOK THE DRILL STEEL TO BREAK IT LOOSE, IT BROKE ANDFELL IN HIS HAND AND SCRAPED HIS FACE.
LOADING BELT LINE STRUCTURE INTO A SUPPLY CAR. A PIECE OF STRUCTION FELL OFF ONE END OF CAR AND PINCHED FINGER BETWEEN ROOF AND STRUCTURE.
THE BOLTER MOVED INTO THE #3 ENTRY WAS SET UP TOSTART BOLTING OPERATION PUT DRILL STEEL AGAINST THE TOP & A PIECE OF ROCK 5 INCHED ROUND & 8 INCHES THICK FELL DOWN STEEL & HIT A MIDDLE FING ER OF THE LEFT HAND
1998 · 3 incidents
THE INJURED WAS TRYING TO FIND AN OIL LEAK BY DIGGING OUT HYDRALIC HOSES UNDER THE VALVE CHEST, STARTED THE MINER WHILE TRYING TO FEEL THE OIL. THE PRESSURE SHOT HYDRAULIC OIL UNDER HIS MIDDLE FINGER NAIL ON HIS RIGHT HAND.
RAISED UP AND HIT BACK AGAINST ROOF. EE HAD NO WITNESS. TO MY UNDERSTANDING HE CAME OUTSIDE OF MINES, WALKED THROUGH MINE OFFICE, GAVE NO INFORMATION ON HIS CONDITION & DROVE HIS OWN AUTOMOBIL E OFF MINE SITE.
2 MINER WAS TRAMMED FORWARD CRUSHING VICTIM BETWEEN RIPPER HEAD AND ROOF BOLTER HEAD AND CONTROLS. EE SUSTAINED BRUISES TO LOWER ABDOMEN AREA.
1997 · 3 incidents
BREAKTHROUGH 2-3 3-4 4-5 MINED AND HADN'T BEEN BOLTED YET. FELL IN ABOUT 2' OF ROCK.
BOLTING TOP WHEN ROCK FELL OUT & HIT HIM ON BACK
EE WAS DRILLING ROOF BOLT HOLE. WHEN HE STARTED TO PUT SECOND PIECE OF STEEL UP, HE CAUGHT HIS FINGEER BETWEEN STEEL.
1996 · 2 incidents
RUNNING SC AND HIT HOLE IN ROADWAY HURTING BACK.
SHOVELING COAL ON BELT LINE AND STRAINED BACK.