Phillips Companies Xenia: 99 MSHA citations Metal/Non-Metal

Prying up heavy object with 1x6 board. The board broke and employee hit the concrete floor with his shoulder.

Crusher rotor rotating foot caught between impact apton & Rotor.

Hitting head on return roller bracket.

Employee was getting out of a 730 Cat haul truck and stepped on a rock twisting his left ankle. He went to Greene Memorial Hospital for x-rays & found he had an ankle sprain.

Employee was jacking up a screw shaft with a come-along. While pulling on the handle he strained his lower lumbar muscle in his back.

EE WAS INSTALLING A V-BELT ON AN ELECTRIC MOTOR & 4 X 10 SCREEN. WHILE PULLING ON THE BELT WITH HIS HANDS (FINGERS UNDER BELT), THE BELT SLIPPED ON, ROLLING THE SCREEN DRIVE SHEAVE AROUND AND CATCHING EE'S LEFT RING FINGER UNDER THE BELT. EE JERKED HIS FINGER FREE, PULLING THE END OF HIS FINGER OFF THE BONE.

WHILE MOVING 7" X 7" X 4' WOODEN BLOCKS EE FELT A PAIN IN HIS RIGHT SHOULDER. HE WENT TO THE HOSPITAL AFTER WORK & WAS TOLD BY THE DOCTOR THAT HE DISLOCATED HIS ROTATOR CUP.

EMPLOYEE WAS LOADING SCRAP METAL INTO A LOADER BUCKET.

EE WAS BRASING A CRACK IN A OIL PAN(TRANSMISSION) OF A EUCLID HAUL TRUCK # 352. THE PAN WAS DRAINED OF OIL AND CLEANED. EE WAS BRASING FOR ABOUT 2 MIN. WHEN HE STOPPED TO INSPECT HIS WORK. HE WAITED ABOUT 10 MIN. TO START BRASING AGAIN. WHEN HE LIT THE TORCH A FLASH FIRE BURNED HIS RT ARM, NECK AND RT SIDE OF FACE.

WHILE REMOVING A BLOW BAR FROM A HAZEMAG CRUSHER EMPLOYEE WAS HITTING IT WITH A HAMMER TO LOOSEN IT. A PIECE OF METAL WENT INTO LEFT SHIN.

WHILE LOOSENING BOLTS ON TAIL BEARING OF A 60" SAND CLASSIFIER, EE FELT A SHARP PAIN IN HIS LEFT ELBOW.

REOCCURRING ACCIDENT FROM 9/25/99, EE WAS CLIMBING A LADDER WHEN HE SLIPPED PULLING HIS BACK OUT OF PLACE.

THIS IS A REOCCURING ACCIDENT FROM 04/16/99 ON EMPLOYEE WHO HAD A FRACTURE TO HIS RIGHT WRIST ONTHIS DATE. HE WAS WALKING BACKWARDS WATCHING A FRONT END LOADER PULL A HOPPER INTO PLACE WHEN HE STEPPED INTO A HOLE AND FELL. HE TRIED TO CATCH HIMSELF WITH HIS RIGHT HAND AND REINJURED(FRACTURED) HIS RIGHT WRIST.

WHILE PULLING A ROPE THAT WAS BURIED UNDER A GRAVEL PILE, EE FELT SOMETHING SNAP IN HIS BACK. HE FINISHED THE SHIFT WHICH WAS OVER A 1200. THE NEXT DAY WHICH WAS SUNDAY HE COULDNT GET OUT OF B ED.

EE WAS HEATING A 1" X 3/16"X4' PIECE OF STRAP METAL TO BEND FOR A HOOK. THE END HE WAS NOT HEATING WASN'T SECURED AND IT FLIPPED UP HITTING THE TORCH, AND KNOCKING IT INTO HIS FACE ON RT SIDE.

EE WAS JACKING UP A BELT PRESS THE PRESS ROLLED OFF THE JACK SMASHING EE'S LEFT BETWEEN THE PRESS & JACK HANDLE

EE OPENED THE LEFT DOOR ON TRUCK #416, WHEN HE GOT OUT OF THE TRUCK AND A GUST OF WIND BLEW THE DOOR SHUT. EE TRIED TO CATCH THE DOOR AND RIGHT HAND WAS PINCHED BETWEEN DOOR AND TRUCK BRAKING HIS WRIST.

WHILE CUTTING METAL BAND THAT HOLDS ROLLERS IN PLACE FOR SHIPPING, BAND SNAPPED BACK AND CUT HIS RIGHT HAND ON TOP.

WHILE HELPING TO LIFT A CRUSHER PART (BLOW BAR WEIGHT 165 LBS) IT SLIPPED OUT OF LEFT HAND DROPPING TO THE CONCRETE FLOOR WITH HIS RIGHT HAND UNDER IT. IT SMASHED HIS RING FINGER AND LITTLE FI NGER TEARING THE SKIN OFF HIS LITTLE FINGER.

WHILE CLEANING A CHUTE EE SLIPPED ON THE WET SURFACE & TWISTED HIS ANKLE

WHILE HELPING TO CHANGE A SCREEN CLOTH, HE WAS CLIMBING FROM LOWER DECK ON THE TOWER TO THE TOP DECK. HIS FOOT SLIPPED OFF THE STEP AND HE LANDED ON THE PLATFORM THAT HE ORIGINALLY STARTED FRO M (ABOUT 12" OF DROP). HE LANDED ON THE SIDE OF HIS RIGHT FOOT WHICH TWISTED HIS ANKLE.

WHILE USING THE BED OF THE WELDING TRUCK AS A WORK PLATFORM EE SLIPPED ON SOME OIL SPILL AND FELL LANDING ON THE GROUND.

WHILE LIFTING A 5 HORSEPOWER ELECTRIC MOTOR FROM FLOOR OF GARAGE, MOTOR SLIPPED FROM HAND & DROPPED ON 3RD FINGER OF RIGHT HAND.

INJURED WAS WELDING A CONV. STAND IN PLACE. CONV. FELL INTO A TRACK HOE TRAPING INJURED BETWEEN THE BOOM ON THE HOE & CONV. THE HAND RAIL ON THE CATWALK CRUSHED INJURED'S CHEST. REASON FOR CON V. FALLIN IS BEING INVESTIGATED AT THE TIME BY MSHA.

WHILE WALKING ON A CATWALK TO GO TO THE CONTROL TOWER HE STEPPED ON A ROCK AND TWISTED HIS ANKLE.

CLIMBING LADDER TO ENTER CAB OF LOADER,FOOT SLIPPED OFF AND HE LANDED ON HIS HEEL CAUSING A BAD BRUISE 2 WEEKS LATER AFTER X-RAYS WERE TAKEN IT SHOWED HIS HEEL WAS BROKEN.

HE WAS REMOVING A BRACKET THAT HOLDS V-BELTS FROM THE WALL ABOUT 10 FT OFF THE FLOOR. HE WAS STANDING ON AN EXTENSION LADDER. THE LADDER SLID OUT FROM UNDER HIM CAUSING HIM TO FALL ON THE CONC RETE. HE LANDED ON HIS KNEE AND HANDS. HE BROKE HIS LEFT WRIST. HIS FACE ALSO HIT THE CONCRETE CAUSING NOSE BLEED AND BRUISES.

EE JUMPED ONTO TAIL SECTION OF CONV. WHEN HE GOT AHOLD OF A ANGLE IRON TO PULL HIMSELF UP THE WELD BROKE CAUSING THE ANGLE IRON TO SWING BACK & HIT HIM IN THE MOUTH.

TOOL BOX DOOR WAS CLOSED ON IONDEX FINGER REQUIRING STITCHES IN FINGER AND LOSE ON NAIL.

VICTIM WAS CLIMBING ON TOP OF A HAZEMAG APK 40 CRUSHER WTIH THE CRUSHER OPENED. ALL IMPACT PLANTES BLOW BARS AND ROTOR HAD BEEN TAKEN OUT FOR REPAIR. THE RATCHET THAT IS USED TO OPEN THE CRUS HER WAS ALSO OFF FOR REPAIR LEAVING CRUSHER OPEN WITH NOTHING HOLDING IT BUT THE WEIGHT OF THE DOOR. VICTIM PUT HIS WEIGHT ON THE DOOR CAUSING IT TO CLOSE AND PINCHING HIS LOWER RIGHT LEG BETW

HOLDING PLOW BO5T UP IN POSITION WITH WRENCH WRENCH SLIPPED OFF CAUSING BOLT TO F ALL OUT OF POSITION AND TO SPIN WHICH CUT HIS FINGER

SUBJECT JUMPED OFF REAR OF MAINTENANCE TRUCK CRACKING BONE IN RT LITTLE TOE

SUBJECT WAS SHOVELING UNDER A PORTABLE CRUSHING PLANT. RAISING UP HE KNOCKED OFF HIS HARD HAT, THEN RAISED UP AGAIN, HITTING THE CORNER OF THE FRAME. THIS CAUSED A GASH IN THE TOP OF HIS HEAD REQUIRING FOUR STITCHES.