Mining Incidents

Rougemont Quarry: 126 MSHA citations Metal/Non-Metal

Controlled by Heidelberg Materials AG
Rougemont, Durham County, NC  ·  Active
MSHA Mine ID: 3102045

Rougemont Quarry has $31K in proposed MSHA penalties and $1K outstanding across 10 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Rougemont Quarry.

Fatalities
0
Total incidents
25
Years on record
1990–2010
Latest incident
Oct 2010
Compliance record
MSHA citations since 2000
126
citations
22
significant & substantial
$30,959
proposed penalties
$27,165
paid to date
88% of proposed penalties paid to date, a $3,794 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
82
inspections on record
1,409
inspection hours
8.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
126 citations across 1,409 inspection hours.
Source: MSHA inspections data, updated weekly.

Rougemont Quarry has $31K in proposed MSHA penalties and $1K outstanding across 10 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$31K
proposed penalties
$28K
current assessed
$27K
paid to date
$1K
outstanding
119 assessments are final orders; 10 contested dockets.
Of $9K in penalties contested before the Commission, $5K was upheld in final decisions.
As of the most recent assessment on 2026-07-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
17.5%
significant & substantial
9.5%
high negligence or reckless
18.3%
reasonably likely or greater
43.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 5.6% low, 84.9% moderate, 9.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
14 citations taken to the federal commission · 11% of citations on record
  • Settled 8 · 57%
  • Stood as issued 3 · 21%
  • Vacated or withdrawn 3 · 21%
50%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 10 decided S&S contests · industry: 79%
37%
Penalty reduction in decided contests
$8K proposed, $5K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2011-12-22.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2011-824M Settlement Bulluck 2013 $5K → $4K
SE 2012-163M Settlement Rae 2012 $807 → $645
SE 2008-257M Withdrawal Melick 2008 $745 → $0
SE 20010021M Dismissal 2001 $371 → $0
SE 2005-322M Dismissal Barbour 2006 $346 → $346
SE 2011-889M Settlement Lesnick 2012 $243 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-07-21
8%
of limit-tested samples over the exposure limit
39
samples
13
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz201 over
  • Respirable dust, <.1mg17
  • Nuisance dust, respirable, <1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (39)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-07-16 Quartz, respirable, >1% Qtz 0.93 0.65 1.43 Utility Man
2026-07-21 Respirable dust, <.1mg 0 Crusher Oper/Worker
2026-07-21 Respirable dust, <.1mg 0 Lab Technician
2026-07-21 Respirable dust, <.1mg 0 Crusher Oper/Worker
2024-06-12 Quartz, respirable, >1% Qtz 0.13 0.75 0.17 Utility Man
2024-06-12 Respirable dust, <.1mg 0 Crusher Oper/Worker
2024-06-12 Respirable dust, <.1mg 0 Utility Man
2024-06-12 Quartz, respirable, >1% Qtz 0.31 Crusher Oper/Worker
2023-06-29 Quartz, respirable, >1% Qtz 0.41 Crusher Oper/Worker
2023-06-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-06-29 Respirable dust, <.1mg 0 Utility Man
2023-06-29 Quartz, respirable, >1% Qtz 0.16 Crusher Oper/Worker
2023-06-29 Respirable dust, <.1mg 0 Lab Technician
2022-03-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-03-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-03-21 Nuisance dust, respirable, <1% Qtz 0.54 10 0.05 Front-end Loader Operator
2022-03-21 Quartz, respirable, >1% Qtz 0.63 1.64 0.38 Crusher Oper/Worker
2022-03-21 Respirable dust, <.1mg 0 Crusher Oper/Worker
2021-08-23 Respirable dust, <.1mg 0 Lab Technician
2021-08-23 Quartz, respirable, >1% Qtz 0.48 0.73 0.66 Utility Man
2021-08-23 Quartz, respirable, >1% Qtz 0.6 0.78 0.77 Utility Man
2021-08-23 Quartz, respirable, >1% Qtz 0.33 0.63 0.52 Utility Man
2021-08-23 Quartz, respirable, >1% Qtz 0.34 Utility Man
2020-08-12 Quartz, respirable, >1% Qtz 0.22 Utility Man
2020-07-16 Quartz, respirable, >1% Qtz 0.26 Crusher Oper/Worker
2020-07-16 Quartz, respirable, >1% Qtz 0.25 Sampler, Dust
2020-07-16 Quartz, respirable, >1% Qtz 0.65 Washer Operator
2015-07-29 Quartz, respirable, >1% Qtz 0.4 1.24 0.32 Crusher Oper/Worker
2015-07-29 Quartz, respirable, >1% Qtz 0.13 0.99 0.13 Complete Load-Haul-Dump
2015-07-29 Respirable dust, <.1mg 0 Utility Man
2012-02-29 Respirable dust, <.1mg 0 Sampler, Dust
2012-02-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2012-02-29 Unlisted Particulate, respirable, <1% Qtz 0.13 Utility Man
2007-05-09 Quartz, respirable, >1% Qtz 0.18 1.06 0.17 Utility Man
2005-06-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2005-06-15 Quartz, respirable, >1% Qtz 0.18 0.47 0.38 Utility Man
2005-06-15 Quartz, respirable, >1% Qtz 0.48 2.08 0.23 Crusher Oper/Worker
2005-06-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-12-18 Quartz, respirable, >1% Qtz 0.14 0.7 0.20 Drill Operator, Rotary Air
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Rougemont Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In North Carolina, metal and nonmetal mining averaged 1.14 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Hanson Aggregates Carolina Inc 1990 to 2002
  2. Heidelberg Materials Southeast, LLC 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 13
2025 14
2024 13
2023 15
2022 14
2021 12
2020 11
2019 12
2018 13
2017 12
2016 11
2015 11
2014 11
2013 11
2012 11
2011 13
2010 18
2009 17
2008 22
2007 20
2006 18
2005 20
2004 20
2003 21
2002 23
2001 23
2000 22
Source: MSHA quarterly employment and production, updated weekly.

Rougemont Quarry sits in Durham County, North Carolina, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Durham County, North Carolina · Population 329,405
0.1%
Mining share of county employment
$79,501
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 6,908 0 0 0.0
2026 Q1 6,888 3 0 435.5
2025 Q4 6,412 0 0 0.0
2025 Q3 7,224 4 1 553.7
2025 Q2 7,143 0 0 0.0
2025 Q1 6,556 0 0 0.0
2024 Q4 6,807 0 0 0.0
2024 Q3 7,059 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 7,742 0 0 0.0
2024 Q1 6,987 0 0 0.0
2023 Q4 6,463 0 0 0.0
2023 Q3 7,372 0 0 0.0
2023 Q2 7,542 0 0 0.0
2023 Q1 7,318 1 0 136.6
2022 Q4 6,595 0 0 0.0
2022 Q3 6,529 3 0 459.5
2022 Q2 7,379 0 0 0.0
2022 Q1 6,182 0 0 0.0
2021 Q4 6,184 0 0 0.0
2021 Q3 6,061 2 1 330.0
2021 Q2 6,009 0 0 0.0
2021 Q1 6,646 0 0 0.0
2020 Q4 5,450 1 1 183.5
2020 Q3 6,256 1 1 159.8
2020 Q2 3,805 0 0 0.0
2020 Q1 5,474 0 0 0.0
2019 Q4 7,026 0 0 0.0
2019 Q3 6,088 0 0 0.0
2019 Q2 5,825 0 0 0.0
2019 Q1 6,484 1 0 154.2
2018 Q4 5,699 0 0 0.0
2018 Q3 5,867 1 1 170.4
2018 Q2 4,946 0 0 0.0
2018 Q1 5,527 0 0 0.0
2017 Q4 5,100 2 0 392.2
2017 Q3 5,683 3 1 527.9
2017 Q2 4,706 0 0 0.0
2017 Q1 6,512 0 0 0.0
2016 Q4 5,390 0 0 0.0
2016 Q3 6,131 0 0 0.0
2016 Q2 5,348 0 0 0.0
2016 Q1 5,311 0 0 0.0
2015 Q4 5,069 0 0 0.0
2015 Q3 5,734 0 0 0.0
2015 Q2 6,246 0 0 0.0
2015 Q1 5,294 0 0 0.0
2014 Q4 5,898 1 0 169.5
2014 Q3 5,868 0 0 0.0
2014 Q2 5,995 3 0 500.4
2014 Q1 4,544 0 0 0.0
2013 Q4 6,626 0 0 0.0
2013 Q3 8,245 0 0 0.0
2013 Q2 5,725 5 1 873.4
2013 Q1 4,895 1 0 204.3
2012 Q4 5,089 0 0 0.0
2012 Q3 4,898 5 0 1020.8
2012 Q2 5,263 0 0 0.0
2012 Q1 5,502 0 0 0.0
2011 Q4 5,367 0 0 0.0
2011 Q3 5,081 0 0 0.0
2011 Q2 6,374 4 1 627.5
2011 Q1 7,685 1 0 130.1
2010 Q4 6,640 7 0 1054.2
2010 Q3 5,817 0 0 0.0
2010 Q2 9,319 1 1 107.3
2010 Q1 5,726 2 0 349.3
2009 Q4 5,014 0 0 0.0
2009 Q3 9,321 0 0 0.0
2009 Q2 8,405 0 0 0.0
2009 Q1 6,123 1 0 163.3
2008 Q4 9,652 0 0 0.0
2008 Q3 10,574 2 0 189.1
2008 Q2 9,835 0 0 0.0
2008 Q1 9,669 1 0 103.4
2007 Q4 11,063 0 0 0.0
2007 Q3 11,982 0 0 0.0
2007 Q2 11,839 3 1 253.4
2007 Q1 11,071 0 0 0.0
2006 Q4 10,172 0 0 0.0
2006 Q3 10,849 0 0 0.0
2006 Q2 10,369 0 0 0.0
2006 Q1 9,226 0 0 0.0
2005 Q4 10,028 4 1 398.9
2005 Q3 12,092 0 0 0.0
2005 Q2 12,956 4 2 308.7
2005 Q1 13,245 1 0 75.5
2004 Q4 12,681 0 0 0.0
2004 Q3 12,956 0 0 0.0
2004 Q2 13,037 0 0 0.0
2004 Q1 12,202 0 0 0.0
2003 Q4 12,746 0 0 0.0
2003 Q3 13,255 1 0 75.4
2003 Q2 12,715 0 0 0.0
2003 Q1 10,815 0 0 0.0
2002 Q4 10,548 2 0 189.6
2002 Q3 12,125 0 0 0.0
2002 Q2 13,001 0 0 0.0
2002 Q1 11,806 0 0 0.0
2001 Q4 12,251 1 0 81.6
2001 Q3 12,992 0 0 0.0
2001 Q2 12,533 1 0 79.8
2001 Q1 12,093 3 0 248.1
2000 Q4 11,452 0 0 0.0
2000 Q3 12,777 2 1 156.5
2000 Q2 15,825 0 0 0.0
2000 Q1 11,827 1 0 84.6
No fatalities recorded at this mine.

Reportable incidents

25 on file

2010 · 2 incidents

October 25, 2010 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Over-exertion in lifting objects

Employee was lifting screen into place and felt a pain in his left arm.

June 1, 2010 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Struck by falling object

After placing a cable to be used in maintenance of a crusher, the cable came loose and struck employee on lower left leg. Employee was able to walk away from the area but upon medical evaluation, several days of restricted work activity were prescribed.

2009 · 1 incident

May 8, 2009 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Heidelberg Materials Southeast, LLC · (Not Elsewhere Classified)

Contract driver entered scale house complaining of chest pains and feeling bad. EMS was called. Driver was taken to hospital. He was kept for observation and released on May 11, 2009. Driver mentioned history of high blood pressure and not taking medication. He stated that the symptoms on May 8 were blood pressure related as indicated by his doctor and the hospital.

2007 · 1 incident

May 24, 2007 NC · Metal/Non-Metal outside foreman, leadman SLIP OR FALL OF PERSON
Heidelberg Materials Southeast, LLC · Fall onto or against objects

Employee had orthoscopic knee surgery on May 24, 2007 to remove floaters from under kneecap. Related to a first aid incident in November 18, 2006, which later became reportable due to fluid drained from knee and reported to MSHA on 2/2/2007. Employee has returned to light duty.

2006 · 4 incidents

November 18, 2006 NC · Metal/Non-Metal outside foreman, leadman SLIP OR FALL OF PERSON
Heidelberg Materials Southeast, LLC · Fall onto or against objects

On November 18, 2006, IE had tripped while walking to his truck, striking knee on a rock, requiring first aid treatment. IE began suffering swelling to knee, and had fluid drained from knee by doctor on January 26, 2007. He returned to full duty on Monday, January 29, 2007.

August 30, 2006 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Over-exertion (Not Elsewhere Classified)

Employee was manually clearing rock from the cavity of a 7' cone crusher when he suffered a muscle strain in his lower back.

June 22, 2006 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Caught in, under or between a moving and a stationary object

Employee was adjusting the finger gates on a discharge chute from the vertical to horizontal postition. He had lowered two of the gates and was working on the third, which was stuck. The gate finally broke loose, catching the employee's finger between the third gate handle and second gate handle. He suffered a minor laceration of the finger which required sutures.

April 25, 2006 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Struck by... (Not Elsewhere Classified)

While moving a piece of screen cloth, employee cut hand on edge of cloth, which required 4 stiches to close.

2005 · 2 incidents

September 7, 2005 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Struck by flying object

While digging out a crusher, employee got sand in right eye. Eye was flushed on site, and employee sent to physician for examination. He was given a prescription eye medication (antibiotic) and returned to work with no restrictions the same day.

March 3, 2005 NC · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
Heidelberg Materials Southeast, LLC · Fall onto or against objects

EE slipped while exiting cab of service truck, striking heel of left foot on outside step on truck cab. Experienced no pain at the time, but following day experienced some discomfort in ankle. Next day EE saw physican who treated his pain with anti-inflammatory meds. & advised him to restrict use for sev. days. 4/6/05: Physician diag. gout & determined gout was cause of pain.

2003 · 2 incidents

December 30, 2003 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Heidelberg Materials Southeast, LLC · Over-exertion in lifting objects

EE WAS REMOVING 4 FT X 4 FT WIRE SCREEN MESH PANEL FROM A PALLET AND STACKING IN A RACK FOR STORAGE. HE STRAINED HIS BACK.

August 7, 2003 NC · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Heidelberg Materials Southeast, LLC · Over-exertion (Not Elsewhere Classified)

EE WAS REMOVING A BENT SAFETY PIN FROM HAUL TRUCK BED. HE CUT PIN AND REMOVED FROM BRACKET. LATER STANDING IN SHOP HE FELT PAIN IN GROIN AND NOTIED BULGE IN AB.

1996 · 2 incidents

July 23, 1996 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Hanson Aggregates Carolina Inc · Struck by... (Not Elsewhere Classified)

OPERATOR WAS ASSISTING MECHANIC IN CHANGING BUCKET TEETH. HE WAS HOLDING LOCK PIN AND MECHANIC WAS SLUGGING TOOTH ONTO SHANK. A PIECE OF METAL BROKE OFF TOOTH AND IMPACTED EE'S ARM CAUSING LAC ERATION.

June 29, 1996 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Hanson Aggregates Carolina Inc · Struck by... (Not Elsewhere Classified)

EE WAS HANDING SCREEN CLOTH PANEL TO MAN ON TOP OF SCREEN. SCREEN SLIPPED AND HIT ANOTHER AND THEN IMPACTED HIS LOWER LEFT LEG CAUSING A LACERATION.

1995 · 4 incidents

November 28, 1995 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Hanson Aggregates Carolina Inc · Struck by falling object

MECHANIC WAS REMOVING BELLY PAN FRAM LOADER. MECHANIC WAS LOOSENING LAST BOLT, THE BOLT BROKE AND BELLY PAN FELL, CRUSHING HIS 4TH DIGIT LEFT HAND.

October 7, 1995 NC · Metal/Non-Metal ledgeman/hand, quarry man MACHINERY
Hanson Aggregates Carolina Inc · Struck by... (Not Elsewhere Classified)

MINER WAS GRINDING A SMOOTH EDGE ON A PIECE OF STEEL. HE TOOK ONE HAND OFF GRINDER TO MOVE EXTENSION CORD. ONE HAND WAS NOT ENOUGH TO SUPPORT TOOL. TOOL FELL, SKIPED ACROSS STEEL AND LACERA TED HIS THIGH.

April 19, 1995 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Hanson Aggregates Carolina Inc · Struck against stationary object

EE WAS REMOVING SCREEN DECK SIDE RAIL BOLTS WITH A HAMMER HE WAS USING ANOTHER BOLT AS A PUNCH HAMMER HIT BOLT A GLANCING BLOW & IMPACTED HIS FINGER AGAINST SCREEN SIDE PANEL

February 16, 1995 NC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Hanson Aggregates Carolina Inc · Over-exertion (Not Elsewhere Classified)

OPERATOR HAD LEFT LOADER TO CLEAR JAMMED CHUTE. HE WAS USING PRY BAR TO CLEAR DISCARGE CHUTE. HE RAISED THE BAR SEVERAL TIME STO CLEAR OBSTRUCTION. AFTER SEVERAL TRIES, BAR STRUCK OVERHEAD STEEL STRUCTURE, DEFLECTED ANAD IMPACTING OPERATORS HAND AND WRIST.

1994 · 2 incidents

December 12, 1994 NC · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
Hanson Aggregates Carolina Inc · Over-exertion in wielding or throwing objects

WORKER WAS REMOVING SPLIT BOLT FROM CRUSHER HEAD BY HITTING A SLUGGING WRENCH WITH A SLEDGE HAMMER. TWO DAYS LATER WORKER REPORTED LOWER BACK PAIN ANDMUSCLE SPASM.

February 23, 1994 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Hanson Aggregates Carolina Inc · Struck against a moving object

TRUCK DRIVER WAS BACKING UP UNDER LOADER TRUCK STOPPED LOADER OPERATOR STARTED TO DUMP DRIVER BELIEVED HE WAS NOT UNDER BUCKET SO HE BACKED UP SOME MORE AT THIS TIME LOADER BUCKET HIT TRUCK BE DLINER CAUSING WHIPLASH INJURY TO TRUCK DRIVER

1993 · 3 incidents

September 25, 1993 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Hanson Aggregates Carolina Inc · Over-exertion in pulling or pushing objects

PERSONNEL HAD COMPLETED RELIGNING SCREEN DISCHARGE CHUTE FINGER GATES & EMPL WAS CLOSING THE CHUTE ACCESS DOOR. HE LEANED HIS SHOULDER AGAINST THE DOOR IN ORDER TO INSERT THE CLOSURE WEDGE & I N DOING SO STRAINED HIS BACK.

April 14, 1993 NC · Metal/Non-Metal superintendent EXPLOSIVES AND BREAKING AGENTS
Hanson Aggregates Carolina Inc · Struck by flying object

SUPERINTENDANT WAS SUPERVISING PRODUCTION SHOT FROM LOCATION 1100 FT FROM PIT. DURING SHOT A PIECE OF FLYROCK LEFT PIT AND STRUCK HIM IN LOWER LEFT LEG. NO FLYROCK LEFT MINE PROPERTY.

January 14, 1993 NC · Metal/Non-Metal drill operator MACHINERY
Hanson Aggregates Carolina Inc · Struck by... (Not Elsewhere Classified)

EE USED BAR TO REACH ROCK LODGED BEHIND GUARD ON TAILPULLEY BAR CAUGHT IN TAILPULLEY AND HIT EE ON HEAD.

1990 · 2 incidents

August 29, 1990 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Hanson Aggregates Carolina Inc · Struck by... (Not Elsewhere Classified)

I.NAME WAS ASSISTING ANOTHER MAN, LIFTING SCREENS TO CHANGE ON SHAKERS. THE OTHER MAN LOST HIS GRIP, THE SCREEN FELL AND SLID AGAINST I.NAME'S LEFT PINKY FINGER.

April 30, 1990 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Hanson Aggregates Carolina Inc · Fall to the walkway or working surface

WHEN CLIMBING UP SUPPORT LEGS FOOT SLIPPED & HE FELL APPROX 8' TO FLOOR & HE LANDED OFF BALANCE ON RIGHT FOOT.