Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Shamrock Sand & Gravel: 85 MSHA citations Metal/Non-Metal

Trenton, Butler County, OH  ·  Intermittent
MSHA Mine ID: 3304011

Shamrock Sand & Gravel has $14K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Shamrock Sand & Gravel.

Fatalities
0
Total incidents
15
Years on record
1990–2018
Latest incident
Mar 2018
Compliance record
MSHA citations since 2000
85
citations
14
significant & substantial
$14,335
proposed penalties
$13,931
paid to date
97% of proposed penalties paid to date, a $404 gap.
Source: MSHA violations data, updated weekly.
See Martin Marietta Materials Inc.'s full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
61
inspections on record
949
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 949 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Shamrock Sand & Gravel has $14K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$14K
proposed penalties
$14K
current assessed
$14K
paid to date
$0
outstanding
85 assessments are final orders; 2 contested dockets.
Of $2K in penalties contested before the Commission, $2K was upheld in final decisions.
As of the most recent assessment on 2023-06-01.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.5%
significant & substantial
3.5%
high negligence or reckless
16.5%
reasonably likely or greater
35.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 21.2% low, 75.3% moderate, 3.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 12% of citations on record
  • Settled 10 · 100%
100%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
19%
Penalty reduction in decided contests
$2K proposed, $2K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2008-02-25.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
LAKE 2008-181M Settlement Lesnick 2009 $2K → $1K
LAKE 2008-180M Settlement Barbour 2009 $600 → $600
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2021-07-15, 5 years ago
0%
of limit-tested samples over the exposure limit
34
samples
20
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg10
  • Aluminum oxide fumes7
  • Arsenic fumes7
  • Beryllium fumes7
Show the individual readings (100)
Date Contaminant Concentration Limit Conc / limit Occupation
2021-07-15 Respirable dust, <.1mg 0 Utility Man
2021-07-15 Respirable dust, <.1mg 0 Crusher Oper/Worker
2021-07-15 Unlisted Particulate, respirable, <1% Qtz 0.22 Front-end Loader Operator
2020-07-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2020-07-09 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2020-07-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-10-26 Respirable dust, <.1mg 0 Cleanup Man
2016-10-26 Respirable dust, <.1mg 0 Supervisor, Co. Official
2012-10-30 Quartz, respirable, >1% Qtz 0.21 1.4 0.15 Front-end Loader Operator
2012-10-30 Unlisted Particulate, total, <1% Qtz 1.92 Utility Man
2012-10-30 Respirable dust, <.1mg 0 Dredge/Barge Operator
2007-05-08 Quartz, respirable, >1% Qtz 0.29 0.79 0.37 Washer Operator
2007-05-08 Quartz, respirable, >1% Qtz 0.84 3.02 0.28 Mechanic
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0.01 10 0.00 Welder, etc.
2004-01-29 Aluminum oxide fumes 3.08 20 0.15 Welder, etc.
2004-01-29 Arsenic fumes 0 1500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 6 0.00 Welder, etc.
2004-01-29 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2004-01-29 Chromium, insoluble 1.27 3 0.42 Welder, etc.
2004-01-29 Cobalt fumes 0 300 0.00 Welder, etc.
2004-01-29 Copper fumes 19.61 300 0.07 Welder, etc.
2004-01-29 Iron oxide fumes 4.13 20 0.21 Welder, etc.
2004-01-29 Lead fumes 0 450 0.00 Welder, etc.
2004-01-29 Magnesium oxide fumes 0.54 20 0.03 Welder, etc.
2004-01-29 Manganese fumes 1.32 5 0.26 Welder, etc.
2004-01-29 Molybdenum fumes 0.09 20 0.00 Welder, etc.
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0.01 10 0.00 Welder, etc.
2004-01-29 Aluminum oxide fumes 1.83 20 0.09 Welder, etc.
2004-01-29 Arsenic fumes 3.92 1500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 6 0.00 Welder, etc.
2004-01-29 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2004-01-29 Chromium, insoluble 0.81 3 0.27 Welder, etc.
2004-01-29 Cobalt fumes 0 300 0.00 Welder, etc.
2004-01-29 Copper fumes 23.53 300 0.08 Welder, etc.
2004-01-29 Iron oxide fumes 2.59 20 0.13 Welder, etc.
2004-01-29 Lead fumes 0 450 0.00 Welder, etc.
2004-01-29 Magnesium oxide fumes 0.33 20 0.02 Welder, etc.
2004-01-29 Manganese fumes 0.78 5 0.16 Welder, etc.
2004-01-29 Molybdenum fumes 0.08 20 0.00 Welder, etc.
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0.01 10 0.00 Welder, etc.
2004-01-29 Aluminum oxide fumes 1.29 20 0.06 Welder, etc.
2004-01-29 Arsenic fumes 0 1500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 6 0.00 Welder, etc.
2004-01-29 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2004-01-29 Chromium, insoluble 0.43 3 0.14 Welder, etc.
2004-01-29 Cobalt fumes 0 300 0.00 Welder, etc.
2004-01-29 Copper fumes 7.84 300 0.03 Welder, etc.
2004-01-29 Iron oxide fumes 1.1 20 0.06 Welder, etc.
2004-01-29 Lead fumes 3.92 450 0.01 Welder, etc.
2004-01-29 Magnesium oxide fumes 0.27 20 0.01 Welder, etc.
2004-01-29 Manganese fumes 0.46 5 0.09 Welder, etc.
2004-01-29 Molybdenum fumes 0 20 0.00 Welder, etc.
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0.12 10 0.01 Welder, etc.
2004-01-29 Aluminum oxide fumes 2.06 20 0.10 Welder, etc.
2004-01-29 Arsenic fumes 0 1500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 6 0.00 Welder, etc.
2004-01-29 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2004-01-29 Chromium, insoluble 0.87 3 0.29 Welder, etc.
2004-01-29 Cobalt fumes 0 300 0.00 Welder, etc.
2004-01-29 Copper fumes 11.76 300 0.04 Welder, etc.
2004-01-29 Iron oxide fumes 2.38 20 0.12 Welder, etc.
2004-01-29 Lead fumes 3.92 450 0.01 Welder, etc.
2004-01-29 Magnesium oxide fumes 0.33 20 0.02 Welder, etc.
2004-01-29 Manganese fumes 0.85 5 0.17 Welder, etc.
2004-01-29 Molybdenum fumes 0.03 20 0.00 Welder, etc.
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0.05 10 0.01 Welder, etc.
2004-01-29 Aluminum oxide fumes 0.65 20 0.03 Welder, etc.
2004-01-29 Arsenic fumes 0 1500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 6 0.00 Welder, etc.
2004-01-29 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2004-01-29 Chromium, insoluble 0.22 3 0.07 Welder, etc.
2004-01-29 Cobalt fumes 0 300 0.00 Welder, etc.
2004-01-29 Copper fumes 0 300 0.00 Welder, etc.
2004-01-29 Iron oxide fumes 0.72 20 0.04 Welder, etc.
2004-01-29 Lead fumes 3.92 450 0.01 Welder, etc.
2004-01-29 Magnesium oxide fumes 0.23 20 0.01 Welder, etc.
2004-01-29 Manganese fumes 0.21 5 0.04 Welder, etc.
2004-01-29 Molybdenum fumes 0 20 0.00 Welder, etc.
2004-01-29 Nickel fumes 0 3 0.00 Welder, etc.
2004-01-29 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2004-01-29 Vanadium fumes 0 50 0.00 Welder, etc.
2004-01-29 Zinc oxide fumes 0 10 0.00 Welder, etc.
2004-01-29 Aluminum oxide fumes 0.31 10 0.03 Welder, etc.
2004-01-29 Arsenic fumes 0 500 0.00 Welder, etc.
2004-01-29 Beryllium fumes 0 2 0.00 Welder, etc.
Showing 100 of 132 laboratory readings: every over-limit reading, then the most recent. MSHA reads one air sample several times, so readings outnumber the samples counted above. The full set is in MSHA's Personal Health Samples file.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Shamrock Sand & Gravel recorded 0.00 reportable injury cases per 100 full-time workers in 2006.

Injury rate, 2006
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
In Ohio, metal and nonmetal mining averaged 2.79 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2006 * 0.00 0.00 0.000
2005 * 9.11 9.11 0.000
2004 * 9.76 0.00 0.000
2002 * 8.48 0.00 0.000
2001 * 0.00 0.00 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Martin Farms Inc 1985 to 1990
  2. Shamrock Gravel Company Inc 1990 to 1993
  3. Shamrock Materials Inc. 1993 to 2015
  4. Martin Marietta Materials Inc. 2015 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 2
2024 3
2023 6
2022 8
2021 7
2020 7
2019 8
2018 7
2017 8
2016 7
2015 6
2014 2
2013 7
2012 7
2011 8
2010 8
2009 6
2008 8
2007 9
2006 11
2005 8
2004 8
2003 7
2002 9
2001 9
2000 10
Source: MSHA quarterly employment and production, updated weekly.

Shamrock Sand & Gravel sits in Butler County, Ohio, where the Census mining category is 0.1% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Butler County, Ohio · Population 389,910
0.1%
Mining share of county employment
$81,194
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 614 0 0 0.0
2026 Q1 278 0 0 0.0
2025 Q4 607 0 0 0.0
2025 Q3 304 0 0 0.0
2025 Q2 668 0 0 0.0
2025 Q1 500 0 0 0.0
2024 Q4 332 0 0 0.0
2024 Q3 580 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 751 0 0 0.0
2024 Q1 2,211 0 0 0.0
2023 Q4 3,579 0 0 0.0
2023 Q3 3,213 0 0 0.0
2023 Q2 3,372 1 0 296.6
2023 Q1 2,962 0 0 0.0
2022 Q4 4,411 0 0 0.0
2022 Q3 5,309 0 0 0.0
2022 Q2 4,230 0 0 0.0
2022 Q1 2,622 0 0 0.0
2021 Q4 4,027 0 0 0.0
2021 Q3 4,663 0 0 0.0
2021 Q2 4,223 0 0 0.0
2021 Q1 2,451 2 0 816.0
2020 Q4 3,419 0 0 0.0
2020 Q3 4,083 0 0 0.0
2020 Q2 4,747 0 0 0.0
2020 Q1 2,567 0 0 0.0
2019 Q4 4,311 0 0 0.0
2019 Q3 4,702 0 0 0.0
2019 Q2 4,565 1 0 219.1
2019 Q1 2,231 1 0 448.2
2018 Q4 3,779 0 0 0.0
2018 Q3 5,054 0 0 0.0
2018 Q2 5,267 0 0 0.0
2018 Q1 4,225 0 0 0.0
2017 Q4 4,816 0 0 0.0
2017 Q3 5,324 0 0 0.0
2017 Q2 5,169 0 0 0.0
2017 Q1 2,877 0 0 0.0
2016 Q4 4,755 1 0 210.3
2016 Q3 5,419 0 0 0.0
2016 Q2 5,037 0 0 0.0
2016 Q1 3,324 0 0 0.0
2015 Q4 4,981 1 0 200.8
2015 Q3 5,255 3 0 570.9
2015 Q2 4,473 0 0 0.0
2015 Q1 1,307 0 0 0.0
2014 Q4 1,245 0 0 0.0
2014 Q3 1,252 0 0 0.0
2014 Q2 1,369 0 0 0.0
2014 Q1 1,074 0 0 0.0
2013 Q4 3,660 0 0 0.0
2013 Q3 3,778 0 0 0.0
2013 Q2 5,396 0 0 0.0
2013 Q1 4,076 1 0 245.3
2012 Q4 3,302 5 0 1514.2
2012 Q3 3,118 4 2 1282.9
2012 Q2 3,538 0 0 0.0
2012 Q1 2,304 0 0 0.0
2011 Q4 3,733 0 0 0.0
2011 Q3 5,312 0 0 0.0
2011 Q2 3,786 1 0 264.1
2011 Q1 3,996 0 0 0.0
2010 Q4 5,592 3 0 536.5
2010 Q3 5,240 5 2 954.2
2010 Q2 4,485 0 0 0.0
2010 Q1 3,819 3 2 785.5
2009 Q4 2,261 0 0 0.0
2009 Q3 4,471 3 0 671.0
2009 Q2 4,563 0 0 0.0
2009 Q1 2,655 0 0 0.0
2008 Q4 4,181 0 0 0.0
2008 Q3 4,579 0 0 0.0
2008 Q2 5,004 0 0 0.0
2008 Q1 4,012 2 0 498.5
2007 Q4 4,772 2 0 419.1
2007 Q3 4,706 0 0 0.0
2007 Q2 4,674 8 2 1711.6
2007 Q1 4,443 0 0 0.0
2006 Q4 5,512 1 0 181.4
2006 Q3 6,047 6 2 992.2
2006 Q2 5,809 1 0 172.1
2006 Q1 5,095 1 0 196.3
2005 Q4 5,512 0 0 0.0
2005 Q3 5,536 1 0 180.6
2005 Q2 5,784 0 0 0.0
2005 Q1 5,120 0 0 0.0
2004 Q4 5,239 1 0 190.9
2004 Q3 5,111 3 0 587.0
2004 Q2 5,806 0 0 0.0
2004 Q1 4,328 3 1 693.2
2003 Q4 5,801 0 0 0.0
2003 Q3 4,406 4 1 907.9
2003 Q2 4,831 0 0 0.0
2003 Q1 3,750 0 0 0.0
2002 Q4 5,903 4 0 677.6
2002 Q3 6,112 1 1 163.6
2002 Q2 6,157 0 0 0.0
2002 Q1 5,413 3 0 554.2
2001 Q4 7,834 0 0 0.0
2001 Q3 5,402 0 0 0.0
2001 Q2 5,900 0 0 0.0
2001 Q1 5,303 1 0 188.6
2000 Q4 6,862 0 0 0.0
2000 Q3 5,964 0 0 0.0
2000 Q2 6,085 0 0 0.0
2000 Q1 6,849 2 0 292.0
No fatalities recorded at this mine.

Reportable incidents

15 on file

2018 · 1 incident

March 16, 2018 OH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Martin Marietta Materials Inc. · Struck by... (Not Elsewhere Classified)

The Blade from a Bosch Angle Cutter with Guard on it broke off and hit the workers hand cutting through the safety gloves ee was wearing. Was taken to Medical Facility where ee received 9 stitches.

2013 · 1 incident

March 4, 2013 OH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Shamrock Materials Inc. · Over-exertion in lifting objects

Miner was attempting to lift 16"X41"X1" piece of AR plate off ground. Plate slipped in left hand causing left arm to hyper extend and strain upper left arm.

2009 · 1 incident

April 8, 2009 OH · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Shamrock Materials Inc. · Struck by... (Not Elsewhere Classified)

Miner was repairing a broken section of cattle fence when a stretched wire whipped back and struck him in the left eye. Miner was taken to hospital where he was prescribed antibiotic eye drops to prevent infection.

2005 · 1 incident

February 22, 2005 OH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Shamrock Materials Inc. · Over-exertion (Not Elsewhere Classified)

WHILE STEPPING DOWN FROM THE PIPE TO GROUND HE FELT A PAIN IN HIS KNEE. THE PIPE WAS APPROX 26" IN DIAMETER

2004 · 2 incidents

June 5, 2004 OH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Shamrock Materials Inc. · Caught in, under or between a moving and a stationary object

While hoisting a final drive gear box from a pickup truck utilizing an "autocrane" on mechanic's truck, the gear box pivoted and crushed the victim's rt index finger against the bed rail of the pickup truck.

February 13, 2004 OH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Shamrock Materials Inc. · Struck by flying object

THE INJURED PERSON FRO FOX TOWING WAS STRUCK BY WHINCH ROPE WHILE ATTEMPTING TO RECOVER A 980G FRONT END LOADER WHICH HAD BECOME STUCK. WHILE WINCHING, THE WIRE WINCH ROPE BROKE AND RECOILED BACK AND STRUCK INJURED.

2002 · 1 incident

January 4, 2002 OH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Shamrock Materials Inc. · Caught in, under or between (Not Elsewhere Classified)

EE STATED THAT WHILE SETTING A NEW BEARING HOUSING ASSEMBLY INTO PLACE ON THE CONCRETE SAND SCREW, THE HOUSING SLIPPED/FELL 3-4 INCHES CRUSHING FINGER BETWEEN HOUSING AND ANGLE IRON FRAMEWORK ON REAR OF CONCRETE SAND SCREW RESULTING IN A LACERATION. EE WAS WEARING LEATHER WORK GLOVES AT TIME OF INCIDENT.

1999 · 1 incident

February 15, 1999 OH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Shamrock Materials Inc. · Over-exertion (Not Elsewhere Classified)

EE STATED THAT WHILE ATTEMPTING CLIMB DOWN FROM EXCAVATOR, HE STATED THAT HIS LEFT HAND SLIPPED ON HANDRAIL CAUSING HIS BODY WEIGHT TO SHIFT QUICLY, RESULTING IN HIS RIGHT KNEE TO TWIST.

1997 · 1 incident

April 7, 1997 OH · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Shamrock Materials Inc. · Fall from machine

AS EE WAS WELDING ON FEED HOPPER GRIZZLY, HIS FOOT SLIPPED OFF A CHANNEL IRON FLANGE & FELL APPROX. 10 FT. ONTO THE #1 PIT PORTABLE CONVEYOR LOCATED BELOW THE FEEDER DISCHARGE CONVEYOR BELT, R ESULTING IN A STRAIN TO THE EE'S RIGHT KNEE.

1996 · 1 incident

February 7, 1996 OH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Shamrock Materials Inc. · Struck by falling object

EMPLOYEE STATED THAT WHILE ATTEMPTING TO DISLODGE ROCK WHICH WAS JAMMED IN THE OVERSIZE CHUTE OF THE WASH PLANT, THE ROCK BOUNCED OFF OF THE CONVEYOR BELT RESULTING IN FINGER BEING CRUSHED BET WEEN THE ROCK AND THE CHUTE.

1995 · 2 incidents

September 18, 1995 OH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Shamrock Materials Inc. · Struck against a moving object

EMPLOYEE STATED THAT HE OPERATED A HAUL TRUCK OUTSIDE OF THE HAUL ROAD AREA AND HIT A RUT. HE STATED HE HIT HIS HEAD ON EITHER SIDE OF THE INSIDE OF THE CAB. HE SAID HE WAS WEARING SEATBELT AT TIME. WITNESS SAW EMPLOYEE'S TRUCK LEAVE HAUL ROAD, HIT BUMP AND COME TO A STOP.

January 26, 1995 OH · Metal/Non-Metal ledgeman/hand, quarry man MACHINERY
Shamrock Materials Inc. · Struck by... (Not Elsewhere Classified)

EE STATED THAT HE WAS STRUCK BY GRINDER WHEEL WHEN GRINDER KICKED BACK AT HIM. EE WAS GRINDING WELDING SLAG OFF METAL.

1992 · 1 incident

June 24, 1992 OH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver MACHINERY
Shamrock Gravel Company Inc · Struck by falling object

USING CRANE TO REMOVE PILING 5/8" X 12" X 13' FROM TRUCK FLATBED OF TRAILER.CHAIN & HOOK USED FOR LIFTING EACH PIECE.PILING HIT TRAILER AND SWUNG OUT OF HOOK AND LANDED ON RIGHT FOOT TOE AREA.

1990 · 2 incidents

August 31, 1990 OH · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Shamrock Gravel Company Inc · Struck by... (Not Elsewhere Classified)

WHIKE OPERATING FEEDER ON ROCK CRUSHER A ROCK BUOUNCED COUT AND STRUCK THE EE JUST ABOVE HIS SAFETY GLASSES CAUSING A 1/2 CUB IN THE BROW.

July 3, 1990 OH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Shamrock Gravel Company Inc · Over-exertion (Not Elsewhere Classified)

INJURED WAS LIFTING A SCREEN FOR A WASHPALNT.THE SCREEN FELL OFF THE BACK OF HIS PICK-UP TRUCK AND HE TRIED TO CATCH ONE END AND PULLED MUSCLES IN HIS BACK.