Mining Incidents

Shawnee Quarry: 87 MSHA citations Metal/Non-Metal

APAC-Kansas, Inc. · Surface
Controlled by CRH PLC
Shawnee, Johnson County, KS  ·  Abandoned
MSHA Mine ID: 1401524

Shawnee Quarry has $12K in proposed MSHA penalties and $0 outstanding across 5 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Shawnee Quarry.

Fatalities
0
Total incidents
10
Years on record
1989–2017
Latest incident
May 2017
Compliance record
MSHA citations since 2000
87
citations
12
significant & substantial
$11,810
proposed penalties
$10,857
paid to date
92% of proposed penalties paid to date, a $953 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
41
inspections on record
542
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 542 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Shawnee Quarry has $12K in proposed MSHA penalties and $0 outstanding across 5 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$12K
proposed penalties
$11K
current assessed
$11K
paid to date
$0
outstanding
87 assessments are final orders; 5 contested dockets.
Of $2K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2021-03-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
13.8%
significant & substantial
3.4%
high negligence or reckless
14.9%
reasonably likely or greater
47.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 14.9% low, 81.6% moderate, 3.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
12 citations taken to the federal commission · 14% of citations on record
  • Settled 10 · 83%
  • Stood as issued 2 · 17%
33%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 6 decided S&S contests · industry: 79%
40%
Penalty reduction in decided contests
$2K proposed, $1K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2020-06-03.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2011-437M Settlement Rae 2012 $949 → $450
CENT 2011-1048M Settlement Lewis 2011 $585 → $131
CENT 2017-0518 Settlement Simonton 2018 $348 → $348
CENT 2020-0168 Default 2020 $267 → $267
CENT 2018-0006 Settlement Simonton 2018 $232 → $232
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-07-12, 9 years ago
13%
of limit-tested samples over the exposure limit
19
samples
15
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz132 over
  • Nuisance dust, respirable, <1% Qtz2
  • Respirable dust, <.1mg2
  • Unlisted Particulate, respirable, <1% Qtz2
Show the individual readings (19)
Date Contaminant Concentration Limit Conc / limit Occupation
2008-04-02 Quartz, respirable, >1% Qtz 1.03 0.95 1.08 Crusher Oper/Worker
2006-04-19 Quartz, respirable, >1% Qtz 1.22 1.06 1.15 Crusher Oper/Worker
2017-07-12 Quartz, respirable, >1% Qtz 0.13 1.31 0.10 Drill Operator, Rotary
2017-07-12 Unlisted Particulate, respirable, <1% Qtz 0.25 Truck Driver
2017-07-12 Quartz, respirable, >1% Qtz 0.29 0.96 0.30 Bobcat Operator
2017-07-12 Unlisted Particulate, respirable, <1% Qtz 0.14 Drill Operator, Rotary
2010-09-16 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2010-09-16 Nuisance dust, respirable, <1% Qtz 0.21 10 0.02 Front-end Loader Operator
2010-09-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2008-04-02 Quartz, respirable, >1% Qtz 0.89 0.98 0.91 Truck Driver
2006-04-19 Quartz, respirable, >1% Qtz 0.73 1.5 0.49 Truck Driver
2006-04-19 Quartz, respirable, >1% Qtz 0.85 0.97 0.88 Crusher Oper/Worker
2006-04-19 Quartz, respirable, >1% Qtz 0.2 1.03 0.19 Blaster, Powder Gang
2006-04-19 Quartz, respirable, >1% Qtz 0.17 1.46 0.12 Drill Operator, Rotary
2005-09-14 Nuisance dust, respirable, <1% Qtz 0.46 10 0.05 Drill Operator, Rotary
2005-09-14 Quartz, respirable, >1% Qtz 0.52 1.81 0.29 Truck Driver
2005-09-14 Quartz, respirable, >1% Qtz 0.69 1.17 0.59 Crusher Oper/Worker
2005-09-14 Quartz, respirable, >1% Qtz 1.17 1.56 0.75 Crusher Oper/Worker
2005-09-14 Quartz, respirable, >1% Qtz 0.16 0.72 0.22 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Shawnee Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2006.

Injury rate, 2006
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
In Kansas, metal and nonmetal mining averaged 1.86 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2006 * 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
2002 * 5.22 5.22 0.000
2000 * 2.26 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Shawnee Rock Company 1989 to 2010
  2. APAC-Kansas, Inc. 2010 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2022 0
2021 1
2020 3
2019 4
2018 3
2017 7
2016 8
2015 9
2014 8
2013 9
2012 8
2011 9
2010 7
2009 5
2008 6
2007 9
2006 17
2005 16
2004 18
2003 20
2002 20
2001 27
2000 45
Source: MSHA quarterly employment and production, updated weekly.

Shawnee Quarry sits in Johnson County, Kansas, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Johnson County, Kansas · Population 614,764
0.1%
Mining share of county employment
$107,261
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2022 Q3 0 0 0
2022 Q2 0 0 0
2022 Q1 0 0 0
2021 Q4 0 0 0
2021 Q3 0 0 0
2021 Q2 180 0 0 0.0
2021 Q1 757 0 0 0.0
2020 Q4 756 0 0 0.0
Show 82 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2020 Q3 757 0 0 0.0
2020 Q2 989 0 0 0.0
2020 Q1 406 1 0 2463.1
2019 Q4 401 0 0 0.0
2019 Q3 1,642 0 0 0.0
2019 Q2 1,783 0 0 0.0
2019 Q1 1,608 0 0 0.0
2018 Q4 2,075 0 0 0.0
2018 Q3 526 0 0 0.0
2018 Q2 642 0 0 0.0
2018 Q1 1,001 0 0 0.0
2017 Q4 2,365 2 0 845.7
2017 Q3 3,070 1 1 325.7
2017 Q2 4,007 0 0 0.0
2017 Q1 3,324 0 0 0.0
2016 Q4 3,623 0 0 0.0
2016 Q3 3,478 0 0 0.0
2016 Q2 4,355 0 0 0.0
2016 Q1 2,035 0 0 0.0
2015 Q4 4,428 0 0 0.0
2015 Q3 5,419 0 0 0.0
2015 Q2 4,458 0 0 0.0
2015 Q1 4,207 0 0 0.0
2014 Q4 3,933 0 0 0.0
2014 Q3 4,826 0 0 0.0
2014 Q2 4,705 0 0 0.0
2014 Q1 2,081 0 0 0.0
2013 Q4 4,828 0 0 0.0
2013 Q3 5,251 0 0 0.0
2013 Q2 5,424 0 0 0.0
2013 Q1 3,437 0 0 0.0
2012 Q4 5,801 0 0 0.0
2012 Q3 4,958 0 0 0.0
2012 Q2 3,828 0 0 0.0
2012 Q1 1,391 0 0 0.0
2011 Q4 3,392 0 0 0.0
2011 Q3 5,196 0 0 0.0
2011 Q2 5,517 1 0 181.3
2011 Q1 4,460 0 0 0.0
2010 Q4 6,445 6 1 931.0
2010 Q3 5,208 7 2 1344.1
2010 Q2 488 0 0 0.0
2010 Q1 8 0 0 0.0
2009 Q4 2,408 0 0 0.0
2009 Q3 1,820 0 0 0.0
2009 Q2 3,529 0 0 0.0
2009 Q1 3,645 2 0 548.7
2008 Q4 3,187 14 0 4392.8
2008 Q3 4,520 0 0 0.0
2008 Q2 3,654 5 1 1368.4
2008 Q1 3,815 1 1 262.1
2007 Q4 2,483 1 0 402.7
2007 Q3 4,647 0 0 0.0
2007 Q2 6,268 0 0 0.0
2007 Q1 5,815 0 0 0.0
2006 Q4 7,223 2 0 276.9
2006 Q3 9,011 5 2 554.9
2006 Q2 9,082 6 1 660.6
2006 Q1 8,830 0 0 0.0
2005 Q4 8,439 0 0 0.0
2005 Q3 7,732 7 0 905.3
2005 Q2 6,923 0 0 0.0
2005 Q1 7,768 0 0 0.0
2004 Q4 9,093 0 0 0.0
2004 Q3 9,311 0 0 0.0
2004 Q2 8,782 5 1 569.3
2004 Q1 8,113 0 0 0.0
2003 Q4 9,651 0 0 0.0
2003 Q3 9,779 4 0 409.0
2003 Q2 10,318 0 0 0.0
2003 Q1 9,349 0 0 0.0
2002 Q4 9,628 0 0 0.0
2002 Q3 10,787 0 0 0.0
2002 Q2 10,759 0 0 0.0
2002 Q1 7,144 0 0 0.0
2001 Q3 11,724 0 0 0.0
2001 Q2 11,427 0 0 0.0
2001 Q1 17,228 0 0 0.0
2000 Q4 21,505 0 0 0.0
2000 Q3 22,690 2 0 88.1
2000 Q2 22,796 3 0 131.6
2000 Q1 21,588 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2017 · 2 incidents

May 24, 2017 KS · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
APAC-Kansas, Inc. · Struck by falling object

Employee received a contusion from hammer bit that struck ee.

March 30, 2017 KS · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
APAC-Kansas, Inc. · Struck against a moving object

Employee was operating a skid steer on an small drainage berm when the machine become over balanced and turned on its side causing minor damage. Case was reported on 3-31-17 to the EHS department and the case become an reportable injury on 4-1-17.

2013 · 1 incident

October 1, 2013 KS · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
APAC-Kansas, Inc. · Caught in, under or between (Not Elsewhere Classified)

Employee was repairing an axle trunnion and while setting it on the ground, left hand middle finger became trapped between the part and a bolt causing fracture and laceration to finger.

2011 · 1 incident

July 20, 2011 KS · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
APAC-Kansas, Inc. · Struck by... (Not Elsewhere Classified)

EE was cutting on a seam on a convey belt making repairs. He was cutting the belt with a box knife. He was cutting the belt towards him when the knife slipped off the belt hitting him in the right knee causing a small laceration to the knee.

2002 · 1 incident

June 19, 2002 KS · Metal/Non-Metal truck driver SLIP OR FALL OF PERSON
Shawnee Rock Company · Fall onto or against objects

EE WAS GETTING OUT OF BED OF POWDER TRUCK. HIS FOOT SLIPPED OFF OF STEP AND HE STRUCK HIS FACE ON THE SIDE OF THE TRUCK CUTTING HIS NOSE AND LIP. HE REQUIRED APPROX. 15 STITCHES FOR 60TH WOUND S.

2000 · 1 incident

January 7, 2000 KS · Metal/Non-Metal miner, nec MACHINERY
Shawnee Rock Company · Struck by falling object

EE ATTEMPTED TO ENTER A MANLIFT WHICH WAS PARKED UNDER A CRUSHER FEED BIN. OTHER WORKERS WERE CUTTING A PIECE OF 1/2" SHEET STEEL TO MODIFY THE CRUSHER FEED BIN. HE WAS NOT WEARING A REQUIRED HARD HAT. WHEN HE WALKED UNDER THE CRUSHER FEED BIN, A PIECE OF STEEL FELL, STRIKING THE LEFT SIDE OF HIS SCALP. HE HAD 5 STITCHES AND WAS RELEASED TO WORK IMMEDIATELY.

1996 · 2 incidents

April 3, 1996 KS · Metal/Non-Metal dispatcher SLIP OR FALL OF PERSON
Shawnee Rock Company · Over-exertion (Not Elsewhere Classified)

HE WAS WALKING THROUGH THE OFFICE TRAILER WHEN THE HEEL OF HIS BOOT CAUGHT ON A STEP AND HE WRENCHED HIS KNEE. HE DID NOT REPORT THE INJURY UNTIL 4-15-96.

January 26, 1996 KS · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Shawnee Rock Company · Fall down stairs

EMPLOYEE CLIMBED THE STEPS TO START THE PRIMARY CRUSHER ENGINE. WHEN HE STEPPED ON THE STEP TO START THE ENGINE, HE SLIPPED ON AN ICY STEP AND FELL SIX FEET TO THE GROUND.

1991 · 1 incident

February 7, 1991 KS · Metal/Non-Metal rock driller HANDLING OF MATERIALS
Shawnee Rock Company · Over-exertion (Not Elsewhere Classified)

EMPL STANDING UNDER CHUTE OF ROCK CRUSHER AS CHUTE WAS BEING REPLACED.WHEN CHUTE WAS RELEASED TOOK FULL WEIGHT OF CHUTE TO HOLD IT IN PLACE.WEIGHT OF CHUTE CAUSED RIGHT KNEE TO GIVE WAY.

1989 · 1 incident

October 9, 1989 KS · Metal/Non-Metal drill operator SLIP OR FALL OF PERSON
Shawnee Rock Company · Fall from ladders

INDIVIDUAL WAS LOADING "ANFO" ONTO 74 FORD F600 POWDER TRUCK, SLIPPED ON LADDER AND SPRAINED RIGHT KNEE. X-RAYS WERE NEGATIVE. AFTER THREE (3) DAYS, FOLLOW-UP VISIT WAS NEGATIVE.