Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
Countries
Peru Chile
English Español
← Back to search

Stripping Crew: 8 MSHA citations Metal/Non-Metal

Controlled by Thomas R Scott
Coralville, Johnson County, IA  ·  Active
MSHA Mine ID: 1302452

Stripping Crew has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Stripping Crew.

Fatalities
0
Total incidents
1
Years on record
2019
Latest incident
Apr 2019
Compliance record
MSHA citations since 2018
8
citations
1
significant & substantial
$1,676
proposed penalties
$1,676
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See River Products Company Inc's full MSHA compliance history →
Inspection activity
MSHA inspections since 2016
25
inspections on record
209
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 209 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Stripping Crew has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
8 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2023-03-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
12.5%
significant & substantial
12.5%
high negligence or reckless
12.5%
reasonably likely or greater
37.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 12.5% low, 75.0% moderate, 12.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2023-12-14
0%
of limit-tested samples over the exposure limit
7
samples
1
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
  • Nuisance dust, respirable, <1% Qtz1
  • Quartz, respirable, >1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (7)
Date Contaminant Concentration Limit Conc / limit Occupation
2023-12-14 Nuisance dust, respirable, <1% Qtz 0.14 10 0.01 Truck Driver
2023-12-14 Respirable dust, <.1mg 0 Backhoe Operator
2022-09-14 Respirable dust, <.1mg 0 Bulldozer Operator
2022-09-14 Quartz, respirable, >1% Qtz 0.25 Truck Driver
2017-06-21 Respirable dust, <.1mg 0 Bulldozer Operator
2017-06-21 Respirable dust, <.1mg 0 Truck Driver
2017-06-21 Unlisted Particulate, respirable, <1% Qtz 0.15 Backhoe Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Stripping Crew recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Iowa, metal and nonmetal mining averaged 1.72 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2017 * 0.00 0.00 0.000
2016 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. River Products Company Inc 2015 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 11
2025 10
2024 8
2023 8
2022 7
2021 8
2020 8
2019 8
2018 8
2017 9
2016 9
2015 10
Source: MSHA quarterly employment and production, updated weekly.

Stripping Crew sits in Johnson County, Iowa, where the Census mining category is 0.0% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Johnson County, Iowa · Population 154,881
0.0%
Mining share of county employment
$74,721
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 7,813 0 0 0.0
2025 Q4 6,754 0 0 0.0
2025 Q3 6,031 0 0 0.0
2025 Q2 5,355 0 0 0.0
2025 Q1 3,974 0 0 0.0
2024 Q4 4,674 0 0 0.0
2024 Q3 5,187 0 0 0.0
2024 Q2 4,640 0 0 0.0
Show 34 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q1 4,094 0 0 0.0
2023 Q4 3,984 0 0 0.0
2023 Q3 3,880 0 0 0.0
2023 Q2 5,120 0 0 0.0
2023 Q1 4,292 1 0 233.0
2022 Q4 4,055 0 0 0.0
2022 Q3 4,583 2 0 436.4
2022 Q2 4,423 0 0 0.0
2022 Q1 3,394 0 0 0.0
2021 Q4 4,528 0 0 0.0
2021 Q3 4,641 0 0 0.0
2021 Q2 4,734 0 0 0.0
2021 Q1 2,929 0 0 0.0
2020 Q4 4,576 0 0 0.0
2020 Q3 4,741 0 0 0.0
2020 Q2 4,698 0 0 0.0
2020 Q1 3,587 2 0 557.6
2019 Q4 4,878 0 0 0.0
2019 Q3 4,782 1 0 209.1
2019 Q2 5,103 0 0 0.0
2019 Q1 3,842 0 0 0.0
2018 Q4 4,885 0 0 0.0
2018 Q3 4,729 0 0 0.0
2018 Q2 4,699 0 0 0.0
2018 Q1 3,635 1 0 275.1
2017 Q4 4,893 0 0 0.0
2017 Q3 5,399 0 0 0.0
2017 Q2 6,351 0 0 0.0
2017 Q1 3,686 0 0 0.0
2016 Q4 5,283 0 0 0.0
2016 Q3 5,473 0 0 0.0
2016 Q2 5,913 0 0 0.0
2016 Q1 3,554 0 0 0.0
2015 Q4 4,916 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

2019 · 1 incident

April 29, 2019 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
River Products Company Inc · Struck against stationary object

While assisting in the changing of the shocks and sway bar, employee was under the blocked equipment and hit head on the rear differential of the articulated truck. EE received a filet laceration on the top of the head requiring 8 stitches.