Mining Incidents

T. P. Strip: 6 MSHA citations Coal

T.P. Mining Inc. · Surface
Flushing, Belmont County, OH  ·  Abandoned
MSHA Mine ID: 3304363

T. P. Strip has $397 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at T. P. Strip.

Fatalities
0
Total incidents
5
Years on record
1997–2005
Latest incident
Dec 2005
Compliance record
MSHA citations since 2000
6
citations
1
significant & substantial
$397
proposed penalties
$397
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
17
inspections on record
342
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 342 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

T. P. Strip has $397 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$397
proposed penalties
$397
current assessed
$397
paid to date
$0
outstanding
6 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2001-08-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.7%
significant & substantial
0.0%
high negligence or reckless
16.7%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 33.3% low, 66.7% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at T. P. Strip shows 97% of 39 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2006-12-15, 19 years ago
97%
within 1.5 mg/m3
39
samples
2.33
dust max (mg/m3)
32 samples taken by MSHA inspectors, 7 by the operator.
Most-sampled occupations
  • AUGER OPERATOR13
  • BULLDOZER OPERATOR7
  • HIGHLIFT OPERATOR/FRONT END LOADER5

Silica (quartz)

Last sampled: 2005-05-31, 21 years ago
8.8
silica avg (%)
4
samples
15.2
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • AUGER OPERATOR1
  • HIGHWALL DRILL OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2006-12-18, 19 years ago
41%
over PEL
17
samples
Most-sampled occupations
  • BULLDOZER OPERATOR6
  • AUGER OPERATOR3
  • AUGER HELPER2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2006 100% 8
2005 100% 3
2004 0% 1
2002 100% 14
2001 100% 3
2000 100% 10
Silica (quartz) by year
Year silica avg (%) samples
2005 0.5 1
2002 11.8 2
2001 11.1 1
Noise by year
Year over PEL samples
2006 33% 3
2005 100% 2
2002 25% 4
2001 0% 3
2000 60% 5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

T. P. Strip recorded 0.00 reportable injury cases per 100 full-time workers in 2002.

Injury rate, 2002
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
In Ohio, coal mining averaged 4.33 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2002 * 0.00 0.00 0.000
2001 * 0.00 0.00 0.000
2000 * 5.15 5.15 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. St. Clair Trucking, Inc. 1995 to 2005
  2. T. P. Mining Inc. 2006 to 2006
  3. St. Clair Trucking Inc. 2006 to 2006
  4. T.P. Mining Inc. 2006 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2007 0
2006 8
2005 8 23,936
2004 7 29,227
2003 4
2002 17 117,740
2001 23 166,430
2000 22 183,452
Source: MSHA quarterly employment and production, updated weekly.

T. P. Strip sits in Belmont County, Ohio, where the Census mining category is 4.7% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Belmont County, Ohio · Population 65,982
4.7%
Mining share of county employment
$58,411
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q1 0 0 0
2006 Q4 2,594 0 0 0.0
2006 Q3 2,676 0 0 0.0
2006 Q2 2,189 0 0 0.0
2006 Q1 3,184 0 0 0.0
2005 Q4 2,669 0 0 0.0
2005 Q3 3,886 0 0 0.0
2005 Q2 0 0 0
Show 18 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q1 6,650 0 0 0.0
2004 Q4 10,143 0 0 0.0
2004 Q2 0 0 0
2004 Q1 0 0 0
2003 Q2 0 0 0
2003 Q1 2,046 0 0 0.0
2002 Q4 2,189 0 0 0.0
2002 Q3 9,360 0 0 0.0
2002 Q2 10,080 0 0 0.0
2002 Q1 11,440 0 0 0.0
2001 Q4 11,520 0 0 0.0
2001 Q3 11,440 1 0 87.4
2001 Q2 11,440 0 0 0.0
2001 Q1 11,440 0 0 0.0
2000 Q4 10,560 0 0 0.0
2000 Q3 7,968 3 0 376.5
2000 Q2 10,560 0 0 0.0
2000 Q1 9,726 2 1 205.6
No fatalities recorded at this mine.

Reportable incidents

5 on file

2005 · 2 incidents

December 27, 2005 OH · Coal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
St. Clair Trucking, Inc. · Struck by falling object

Rock fell from highwall & hit employee on shoulder while on auger.

September 28, 2005 OH · Coal belt foreman, maintenance foreman, maintenance supervisor POWERED HAULAGE
St. Clair Trucking, Inc. · Struck by flying object

While loading 637C scraper on truck, a 4x6x18" block blew out from side of front tire hitting EE's in right leg.

2000 · 1 incident

June 20, 2000 OH · Coal auger operator, auger crew supervisor POWERED HAULAGE
St. Clair Trucking, Inc. · Caught in, under or between (Not Elsewhere Classified)

FOOT STUCK IN CONVEYOR WHILE HOOKING UP TO MACHINE.

1999 · 1 incident

March 15, 1999 OH · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL
St. Clair Trucking, Inc. · Struck by falling object

ROCK FELL OFF HIGHWALL AND HIT MECHANIC IN HEAD. WAS KNOCKED OUT FOR 4 MIN. & TRANSPORTED TO HOSPITAL.

1997 · 1 incident

September 19, 1997 OH · Coal mine manager, mine foreman, mine owner SLIP OR FALL OF PERSON
St. Clair Trucking, Inc. · Fall to the walkway or working surface

EE WALKING ACROSS SPOIL PILE, SLIPPED ON A LOOSE ROCK AND FELL DOWN ON RT KNEE, TWISTING IT.