Troy Gravel Metal/Non-Metal

PULLING DREDGE TO SHORE, SHORE LINE CABLE HIT EEON KNEE.

EMPLOYEE STEPPED OUT OF BUCKET TRUCK AND TWISTEDRIGHT ANKLE. AREA WHERE FOOT PLACED WAS UN-LEVEL.

EE WAS HELPING OTHER CHANGE MOTOR ON P-1 WAS PULLING ON V BELTS ON MOTOR CHIVE WHEN MY LEFT ARM STARTED HURTING ALSO HAD A TINGLING SENSATION IN SAME ARM.

EE WAS GETTING DOWN OFF OF THE LOADER HE REACHEDFOR THE HAND RAIL & MISSED IT. HE FELL ABOUT 5FTTO THE GROUND THE LOADER WAS A 980-B

EMPLOYEE WAS HELPING TO PUT TOGETHER THE SAND STOCKING CONVEYER HE WAS PULLING ON SUSPENSION CABLES TO HOOK THEM UP.

NINE EE WAS HELPING THREE OTHER EES LIFTING 4"X6" TUBES BEAM 8'LX1/4 THICK FOR FABRICION HOPPER GRIZZLY ALSO LIFTING UP NEW MOTOR MOUNT INSTALL ON TXT 6 GREAR REDUCE CONVEYOR.

EE WAS HELPING THE WELDER INSTALL A TWO PART GUARD ON THE CONE CRUSHER. HE WAS HOLDING IT IN PLACE BY ONE PART, WHEN THE OTHER PART SLIPPED AND CRUSHED HIS LEFT THUMB BETWEEN THE TWO PART.

HAD A BIG FLAT ROCK STUCK IN THE FEEDER. I TOOK A BAR AND GOT IT OUT. IT WAS TOO BIG TO LAY DOWN ON BELT, SO I STOOD IT UP ON ITS EDGE AND HAD COWORKER START THE BELT SO IT COULD RIDE IT OUT O F THE HOPPER. IT WAS EGG-SHAPED. I HAD TO HOLD THE ROCK ON ITS EDGE. WHEN THE BELT STARTED, THE ROCK ROLLED BACK AND STOOD ON ITS END AND JAMMED MY RIGHT HAND UP INTO ANGLE IRON "X" BRACE.

STEEL TRUCK DRIVER WAS OFF LOADING 8X10 STEEL PLATE FROM FLAT BED TRUCK. 4X4'S WERE PERMANENTLY MOUNTED TO THE FLOOR AS A MEANS TO LAY PLATE. DRIVER TRIPPED ON 4X4 AND FELL APPROX 41/2 FT TO GROUND

EMPLOYEE WAS WORKING WITH CREW OF 3 MEN TRYING TO CHAIN AND LIFT DREDGE SLEEVE, IN ORDER TO REALL BACK TO DREDGE PIPE. HOIST BOOM CABLE BROKE AT FRAME HIT EMPLOYEE ON SHOULDER, KNOCKING HIM TO DESK. CONTUSIONS TO SHOULDER.

EMPLOYEE WAS CHANGING HEADLIGHT ON LOADER. FOOT SLIPPED OFF STEP. HE FELL TOG ROUND, LANDING STIFF LEGGED, THEN FELL BACKWARDS HITTING HIS HEAD AND BACK.

EMPLOYEE WAS INSIDE CONE CRUSHER TO UNPLUG THE ROCK INSIDE THE CRUSHER. WHEN HE TRIED TO GE TOUT HIS CHEST GOT STUCK IN BETWEEN THE FEED PLATE AND MAIN FRAME BOWL.

CHANGING SCREEN CLOTH AND WAS LIFTING A CLOTH ONTO THE SCREEN AND BACK STARTED HURTING. EMP HAS A BACK PROBLEM FROM A PREVIOUS INJURY AT ANOTHERPLANT. THIS IS AN AGGRAVATION OF A PREVIOUS INJU RY.

CUTTING A BOLT ON A SHAKER SCREEN, HOT SLAG OFF OF BOLT WENT UP THE SLEEVE OF COVERALLS, BURNINGLEFT ARM. HE PUT A BAND AID ON IT, 2 DAYS LATER,THE BURN GOT INFECTED, HE WENT TO THE MEDICAL CE NTER, THEY GAVE HIM ANTIBODES, A PRESCRIPTION AND HE RETURNED AT REGULAR JOB.

WAS PUTTING A CHUTE BACK ON THAT WAS REMOVED FOR REPAIR. USING A COME-A-LONG TO LIFT INTO PLACE. EMPLOYEE WAS GUIDING THE CHUTE TO ALIGN HOLES. A PRY BAR WAS USED TO MOVE. THE CHUTE SHIFTED AN D CAUGHT RING FINGER OF LEFT HAND. CRUSHED AND CUT THE FINGER FROM FIRST JOINT TO THE TIP.

COMPLAINED OF ARM ADN HAND HURTING TOOK TO HEALTH CENTER, POSSIBLE CT SYNDROME FROM REPEATED MOTION OF PICKING MUD OFF BELT. EE SIAD IT HAD BEEN BOETHERING HIM FOR A LONG WHIHLE BUT NOW IT IS GETTING WORSE.

THREE EMPLS WERE LIFTING A WEAR PLATE UP ON THE CRUSHER BOWL.ONE EMPL TOLD THEM TO LET IT GO & EVERYONE DID,IT WEADGED & INJURED EMPL REACHEDINTO TRY TO FREE & AT THE SAME TIME ANOTHER EMPL PUSHED ON THE LINER & IT SLIPPED DOWN & CAUGHT INJURED EMPLS FINGER BEFORE HE COULD MOVE HIS HAND.

LIFTING AND PUSHING LARGE ROCK OFF OF CONVEYOR BELT.

EE WAS PUSHING MUD OFF THE BELT. HE PUSHED ABOUT 20 TON OF MUD IN A 10 HOURS PERIOD. HE RECEIVED PAIN IN WRIST, SHOULDER, NECK AND LOWER BACK.

08-28-91 7:30 AM INJURED AND ANOTHER EMPLOYEE WERE MOVING SWING GEAR COVER TO THE SIDE WHEN IT SLIPPED FROM HIS RIGHT HAND AND PINCHED HIS MIDDLE FINGER LEFT HAND GEAR COVER AND FLOOR.COVER WE IGHTS 75 TO 100 LBS.

LOADING A DC ELECTRIC PANEL APPROX. 2 FT X 2 FT X 6 FT INTO A PICK-UP TRUCK BY HAND THE PANEL SLID AND CRUSHED THE TIP OF LITTLE FINGER ON RIGHT HAND BETWEEN THE TOOL BOX ON THE TRUCK AND THE DC ELECTRIC PANEL, RESULTING IN A SPLINTERED BONE AND 12 STITCHES.

THE EMPLOYEE WAS CLIMBING UP THE SIDE OF THE CRUSHER. HE LEANED AGAINST A LOOSE BAR AND LOST HIS BALANCE, AND JUMPED 7 FEET TO THE GROUND. THE GROUND WAS FROZEN, AND THE EMPLOYEE LANDED ON THE HEELS OF HIS FEET, BRUISING THEM.

THE EMPLOYEE WAS UNTHREADING LOCK BOLTS OUT OF THE 4800 CRUSHER. THE BOLT CAME LOOSE CAUSING THE PRY BAR TO OVE QUICKLY, PINCHING HIS FINGER BETWEEN THE CRUSHER AND PRY BAR.

EMPLOYEE WAS UNTHREADING A SECTION OF TWO INCH PIPE EMPLOYEE UNDERESTIMATED WEIGHT OF PIPE USING ONE HAND TO HOLD IT PIPE FELL FROM LEFT HAND STRIKING THUMB ON RT.HAND EMPLOYEE BROKE THUMB ON RT.HAND