EE was using a straight edge to cut a conveyor belt w/box cutter knife. The blade slipped & cut EE's left wrist/forearm. EE was transported to ER by a co-worker. EE had a surgical procedure to repair a torn nerve, tendon, and artery and discharged from ER after surgery. EE is off work for 2 weeks w/a RTW restriction of no use of left hand/arm for 3 months upon return to work.
West Wash Plant #11: 96 MSHA citations Metal/Non-Metal
West Wash Plant #11 has $24K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at West Wash Plant #11.
- Fatalities
- 0
- Total incidents
- 3
- Years on record
- 2015–2022
- Latest incident
- Aug 2022
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.West Wash Plant #11 has $24K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 13 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEST 2015-0959 | Settlement | Paez | 2016 | $11K → $6K |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2026-04-28
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Respirable dust, <.1mg9
Show the individual readings (9)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2026-04-28 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2026-04-28 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2017-08-17 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2017-08-17 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2017-08-17 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2017-08-17 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2012-07-19 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2012-07-19 | Respirable dust, <.1mg | 0 | Supervisor, Co. Official | ||
| 2006-05-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator |
- Willits Company, Inc. 2004 to 2016
- Simon Contractors 2016 to 2020
- Croell, Inc. 2020 to present
| Year | Employees |
|---|---|
| 2026 | 2 |
| 2025 | 2 |
| 2024 | 1 |
| 2023 | 2 |
| 2022 | 5 |
| 2021 | 3 |
| 2020 | 2 |
| 2019 | 1 |
| 2018 | 3 |
| 2017 | 3 |
| 2016 | 4 |
| 2015 | 5 |
| 2014 | 5 |
| 2013 | 4 |
| 2012 | 3 |
| 2011 | 3 |
| 2010 | 1 |
| 2009 | 4 |
| 2008 | 4 |
| 2007 | 2 |
| 2006 | 2 |
| 2005 | 0 |
| 2004 | 3 |
West Wash Plant #11 sits in Laramie County, Wyoming, where the Census mining category is 1.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 1,124 | 8 | 0 | 7117.4 |
| 2026 Q1 | 0 | 0 | 0 | |
| 2025 Q4 | 0 | 0 | 0 | |
| 2025 Q3 | 826 | 0 | 0 | 0.0 |
| 2025 Q2 | 2,072 | 7 | 1 | 3378.4 |
| 2025 Q1 | 1,755 | 0 | 0 | 0.0 |
| 2024 Q4 | 1,867 | 0 | 0 | 0.0 |
| 2024 Q3 | 0 | 0 | 0 |
Show 78 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 0 | 0 | 0 | |
| 2024 Q1 | 0 | 0 | 0 | |
| 2023 Q4 | 0 | 0 | 0 | |
| 2023 Q3 | 1,254 | 1 | 0 | 797.4 |
| 2023 Q2 | 1,886 | 0 | 0 | 0.0 |
| 2023 Q1 | 0 | 0 | 0 | |
| 2022 Q4 | 1,363 | 0 | 0 | 0.0 |
| 2022 Q3 | 1,750 | 1 | 0 | 571.4 |
| 2022 Q2 | 2,473 | 0 | 0 | 0.0 |
| 2022 Q1 | 40 | 0 | 0 | 0.0 |
| 2021 Q4 | 2,438 | 0 | 0 | 0.0 |
| 2021 Q3 | 2,422 | 0 | 0 | 0.0 |
| 2021 Q2 | 2,088 | 4 | 2 | 1915.7 |
| 2021 Q1 | 0 | 0 | 0 | |
| 2020 Q4 | 1,000 | 0 | 0 | 0.0 |
| 2020 Q3 | 1,416 | 0 | 0 | 0.0 |
| 2020 Q2 | 1,638 | 1 | 1 | 610.5 |
| 2020 Q1 | 736 | 0 | 0 | 0.0 |
| 2019 Q4 | 1,118 | 0 | 0 | 0.0 |
| 2019 Q2 | 1,551 | 0 | 0 | 0.0 |
| 2019 Q1 | 0 | 0 | 0 | |
| 2018 Q4 | 2,076 | 0 | 0 | 0.0 |
| 2018 Q3 | 1,777 | 0 | 0 | 0.0 |
| 2018 Q2 | 2,367 | 0 | 0 | 0.0 |
| 2018 Q1 | 1,488 | 0 | 0 | 0.0 |
| 2017 Q4 | 1,927 | 0 | 0 | 0.0 |
| 2017 Q3 | 3,806 | 5 | 1 | 1313.7 |
| 2017 Q2 | 2,779 | 0 | 0 | 0.0 |
| 2017 Q1 | 864 | 0 | 0 | 0.0 |
| 2016 Q4 | 2,472 | 0 | 0 | 0.0 |
| 2016 Q3 | 3,192 | 0 | 0 | 0.0 |
| 2016 Q2 | 2,575 | 9 | 3 | 3495.1 |
| 2016 Q1 | 246 | 0 | 0 | 0.0 |
| 2015 Q4 | 3,385 | 0 | 0 | 0.0 |
| 2015 Q3 | 6,055 | 0 | 0 | 0.0 |
| 2015 Q2 | 6,021 | 13 | 3 | 2159.1 |
| 2015 Q1 | 2,028 | 0 | 0 | 0.0 |
| 2014 Q4 | 2,959 | 9 | 4 | 3041.6 |
| 2014 Q3 | 3,718 | 2 | 1 | 537.9 |
| 2014 Q2 | 3,111 | 0 | 0 | 0.0 |
| 2014 Q1 | 1,600 | 2 | 0 | 1250.0 |
| 2013 Q4 | 2,339 | 0 | 0 | 0.0 |
| 2013 Q3 | 3,156 | 0 | 0 | 0.0 |
| 2013 Q2 | 2,505 | 5 | 0 | 1996.0 |
| 2013 Q1 | 1,662 | 0 | 0 | 0.0 |
| 2012 Q4 | 2,322 | 0 | 0 | 0.0 |
| 2012 Q3 | 2,205 | 10 | 0 | 4535.1 |
| 2012 Q2 | 2,032 | 0 | 0 | 0.0 |
| 2012 Q1 | 1,067 | 3 | 0 | 2811.6 |
| 2011 Q4 | 1,551 | 0 | 0 | 0.0 |
| 2011 Q3 | 1,273 | 0 | 0 | 0.0 |
| 2011 Q2 | 1,440 | 0 | 0 | 0.0 |
| 2011 Q1 | 1,523 | 0 | 0 | 0.0 |
| 2010 Q4 | 1,037 | 3 | 3 | 2893.0 |
| 2010 Q3 | 665 | 0 | 0 | 0.0 |
| 2010 Q2 | 0 | 0 | 0 | |
| 2010 Q1 | 0 | 1 | 0 | |
| 2009 Q4 | 1,647 | 0 | 0 | 0.0 |
| 2009 Q3 | 2,870 | 3 | 1 | 1045.3 |
| 2009 Q2 | 2,800 | 0 | 0 | 0.0 |
| 2009 Q1 | 1,103 | 6 | 1 | 5439.7 |
| 2008 Q4 | 2,156 | 0 | 0 | 0.0 |
| 2008 Q3 | 2,933 | 0 | 0 | 0.0 |
| 2008 Q2 | 2,329 | 0 | 0 | 0.0 |
| 2008 Q1 | 3,054 | 0 | 0 | 0.0 |
| 2007 Q4 | 1,006 | 0 | 0 | 0.0 |
| 2007 Q3 | 1,360 | 0 | 0 | 0.0 |
| 2007 Q2 | 1,089 | 2 | 1 | 1836.5 |
| 2007 Q1 | 756 | 0 | 0 | 0.0 |
| 2006 Q4 | 774 | 0 | 0 | 0.0 |
| 2006 Q3 | 1,386 | 0 | 0 | 0.0 |
| 2006 Q2 | 1,733 | 0 | 0 | 0.0 |
| 2006 Q1 | 304 | 0 | 0 | 0.0 |
| 2005 Q4 | 0 | 0 | 0 | |
| 2005 Q3 | 0 | 0 | 0 | |
| 2005 Q2 | 21 | 0 | 0 | 0.0 |
| 2005 Q1 | 0 | 0 | 0 | |
| 2004 Q4 | 1,130 | 1 | 0 | 885.0 |
Reportable incidents
3 on file2022 · 1 incident
2021 · 1 incident
Employee was replacing tail pulley in conveyor while sliding shaft into bearing when it became wedged and wouldn't move. Employee tried to adjust the bearing to finish sliding the shaft in when the bearing shifted causing the safety to slip and fall thus pinching employee's right hand between the shaft and conveyor structure.
2015 · 1 incident
An employee was cutting a piece of heater hose with a razor blade to repair the leak in the excavator. He cut through the hose and then his left thumb. He went to a doctor and had 13 stitches put in.