C J & L Mining Inc: 51 MSHA citations operator
Controlled by
James Taylor; Coy Taylor
MSHA operator ID: P23180
Watch this operator
Email me when a new MSHA incident is filed at any C J & L Mining Inc mine.
- Fatalities
- 0
- Total incidents
- 6
- Mines on record
- 2
- Years on record
- 1996–2004
Compliance record
MSHA citations since 2001
51
citations
15
significant & substantial
$3,522
proposed penalties
$3,522
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
58
inspections on record
1,548
inspection hours
3.3
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.51 citations across 1,548 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
51 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-10-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.29.4%
significant & substantial
0.0%
high negligence or reckless
29.4%
reasonably likely or greater
5.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 41.2% low, 58.8% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2005
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 5.11 and the all-US-mining average was 4.21 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 0.00 | 0.00 | 0.000 |
| 2004 * | 5.63 | 5.63 | 0.000 |
| 2003 * | 4.47 | 4.47 | 0.000 |
| 2002 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-11-21, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.98%
within 1.5 mg/m3
263
samples
2.04
dust max (mg/m3)
122 samples taken by MSHA inspectors, 141 by the operator.
Most-sampled occupations
- CONTINUOUS MINER OPERATOR152
- SHUTTLE CAR OPERATOR (STANDARD SIDE)27
- ROOF BOLTER (SINGLE HEAD)25
Silica (quartz)
Last sampled: 2005-10-31, 20 years ago4.0
silica avg (%)
11
samples
10.6
silica max (%)
Most-sampled occupations
- CONTINUOUS MINER OPERATOR11
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-05-18, 21 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.31%
over PEL
16
samples
Most-sampled occupations
- SHUTTLE CAR OPERATOR (STANDARD SIDE)5
- CONTINUOUS MINER OPERATOR4
- SCOOP CAR OPERATOR3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- HANDLING OF MATERIALS 2 non-fatal
- POWERED HAULAGE 2 non-fatal
- FALL OF ROOF OR BACK 1 non-fatal
- SLIP OR FALL OF PERSON 1 non-fatal
Incident timeline
2004
1
2003
1
1997
2
1996
2
Mines on record
- Vansant 4A WV
- Mine No 1 (4) WV
For insurers, brokers, and safety consultants
Where C J & L Mining Inc stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.