Mining Incidents

Herndon Processing Company: 1 recorded fatality operator

MSHA operator ID: P21111

Watch this operator

Email me when a new MSHA incident is filed at any Herndon Processing Company mine.

Fatalities
1
Total incidents
17
Mines on record
1
Years on record
1995–2002
Compliance record
MSHA citations since 2000
67
citations
24
significant & substantial
$4,886
proposed penalties
$4,886
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
20
inspections on record
638
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 638 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
67 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2002-12-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
35.8%
significant & substantial
1.5%
high negligence or reckless
35.8%
reasonably likely or greater
22.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 22.4% low, 76.1% moderate, 1.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
4.81
total case rate
4.81
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2002 * 4.81 4.81 0.000
2001 * 8.52 8.52 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2003-01-30, 23 years ago
86%
within 1.5 mg/m3
81
samples
2.62
dust max (mg/m3)
25 samples taken by MSHA inspectors, 56 by the operator.
Most-sampled occupations
  • FINE COAL PLANT OPERATOR37
  • FROTH CELL OPERATOR19
  • DRYER OPERATOR15

Silica (quartz)

Last sampled: 2002-06-04, 24 years ago
0.7
silica avg (%)
13
samples
0.9
silica max (%)
Most-sampled occupations
  • FINE COAL PLANT OPERATOR4
  • CLEANING PLANT OPERATOR3
  • DRYER OPERATOR3

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2000-05-18, 26 years ago
17%
over PEL
6
samples
Most-sampled occupations
  • CAR DROPPER1
  • CAR TRIMMER/CAR LOADER1
  • CLEANING PLANT OPERATOR1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2002
1
2001
2
1999
3
1998
5
1997
4 (1f)
1996
1
1995
1

Mines on record

Fatalities under this operator

1 recorded
February 6, 1997 WV · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · HANDTOOLS (NONPOWERED)
Herndon Processing Company · Caught in, under or between a moving and a stationary object

THE VICTIM RECEIVED FATAL CRUSHING INJURIES WHILE WORKING UNDER THE BOOM OF A BANTAM 350 CRANE. THE VICTIM AND CRANE OPERATOR WERE IN THE PROCESS OF REMOVING THE BOOM FROM THE MACHINE. THE VIC TIM APPARENTLY POSITIONED HIMSELF UNDER THE BOOMAND KNOCKED OUT THE 2 BOTTOM PINS CAUSING BOOM TO FALL.

For insurers, brokers, and safety consultants

Where Herndon Processing Company stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us