Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All controllers

Eddie Hurley: 356 MSHA citations controller

MSHA controller ID: C13045

Watch this controller

Email me when a new MSHA incident is filed at any mine Eddie Hurley controls.

Fatalities
0
Total incidents
151
Mines on record
17
Years on record
1987–2014
Compliance record
MSHA citations since 2000
356
citations
186
significant & substantial
$66,092
proposed penalties
$66,001
paid to date
100% of proposed penalties paid to date, a $91 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
279
inspections on record
5,379
inspection hours
6.6
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
356 citations across 5,379 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$66K
proposed penalties
$66K
current assessed
$66K
paid to date
$91
outstanding
350 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2014-12-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
52.4%
significant & substantial
3.1%
high negligence or reckless
52.3%
reasonably likely or greater
36.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 15.0% low, 81.9% moderate, 3.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2009
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
10.86
total case rate
3.62
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 4.16 and the all-US-mining average was 3.36 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2009 * 10.86 3.62 0.000
2008 * 6.67 0.00 0.000
2007 * 8.72 8.72 0.000
2006 * 13.91 10.43 0.000
2005 * 10.93 0.00 0.000
2004 * 6.00 6.00 0.000
2003 * 16.70 11.93 0.000
2002 11.78 6.73 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2014-07-03, 12 years ago
98%
within 1.5 mg/m3
304
samples
3.22
dust max (mg/m3)
215 samples taken by MSHA inspectors, 89 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR50
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE50
  • HIGHLIFT OPERATOR/FRONT END LOADER46

Silica (quartz)

Last sampled: 2010-02-12, 16 years ago
16.9
silica avg (%)
24
samples
59.0
silica max (%)
Most-sampled occupations
  • HIGHWALL DRILL OPERATOR7
  • BULLDOZER OPERATOR6
  • CONTINUOUS MINER OPERATOR5
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2014-03-24, 12 years ago
6%
over PEL
85
samples
Most-sampled occupations
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE20
  • HIGHLIFT OPERATOR/FRONT END LOADER16
  • BULLDOZER OPERATOR15
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2014
1
2010
1
2009
3
2008
1
2007
1
2006
4
2005
2
2004
2
2003
9
2002
16
2001
17
2000
18
1999
2
1998
8
1997
7
1996
7
1995
12
1994
8
1993
6
1992
4
1991
5
1990
3
1989
12
1988
1
1987
1

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where Eddie Hurley stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us