Mining Incidents

George E Nettels: 2 recorded fatalities controller

MSHA controller ID: M00207

Watch this controller

Email me when a new MSHA incident is filed at any mine George E Nettels controls.

Fatalities
2
Total incidents
71
Mines on record
7
Years on record
1985–2017
Compliance record
MSHA citations since 2000
360
citations
80
significant & substantial
$123,669
proposed penalties
$92,135
paid to date
75% of proposed penalties paid to date, a $31,535 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
171
inspections on record
2,111
inspection hours
17.1
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
360 citations across 2,111 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2015-10-15.
On record since 2015.
Source: MSHA imminent-danger order records, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$124K
proposed penalties
$92K
current assessed
$92K
paid to date
$0
outstanding
355 assessments are final orders; 10 contested dockets.
Of $61K in penalties contested before the Commission, $29K was upheld in final decisions.
As of the most recent assessment on 2018-03-01.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
22.4%
significant & substantial
3.4%
high negligence or reckless
23.6%
reasonably likely or greater
57.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 5.9% low, 90.7% moderate, 3.1% high, 0.3% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2010
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.65
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.68 and the all-US-mining average was 3.20 cases per 100 workers.
Year total case rate days-away fatal
2010 3.65 0.00 0.000
2009 2.15 0.00 0.000
2008 0.98 0.98 0.000
2007 0.00 0.00 0.000
2006 1.12 1.12 0.000
2005 1.24 1.24 0.000
2004 1.32 0.00 0.000
2003 1.43 0.00 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2010-11-09, 15 years ago
0%
of limit-tested samples over the exposure limit
33
samples
27
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz18
  • Nuisance dust, respirable, <1% Qtz9
  • Respirable dust, <.1mg6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 3% of citations on record
  • Settled 9 · 90%
  • Vacated or withdrawn 1 · 10%
88%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 8 decided S&S contests · industry: 79%
51%
Penalty reduction in decided contests
$58K proposed, $28K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2014-10-09. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2006-6M Settlement Manning 2006 $48K → $26K
CENT 2008-378M Settlement Manning 2009 $6K → $977
CENT 2005-225M Settlement Manning 2006 $2K → $200
CENT20010312M Settlement Zielinski 2001 $2K → $149
CENT20010136M Settlement Melick 2001 $1K → $750
CENT20010135M Settlement Melick 2001 $650 → $488
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2017
2
2015
1
2013
2
2012
2
2010
3
2009
2
2008
1
2006
1
2005
1
2004
1
2003
1
2002
3
2000
5
1999
3 (1f)
1998
3 (1f)
1997
4
1996
2
1995
5
1994
5
1993
1
1992
3
1991
2
1990
3
1989
2
1988
1
1987
4
1986
6
1985
2

Operators under this controller

Mines on record

Fatalities under this controller

2 recorded
July 30, 1999 KS · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Midwest Minerals LLC · Caught in, under or between a moving and a stationary object

EMPLOYEE WAS HAULING 1 1/4" X 0 CRUSHED STONE FROM THE CRUSHING PLANT TO THE STOCKPILE. WHILE ASCENDING THE RAMP TO THE TOP OF THE STOCKPILE, THE TRUCK OVERTURNED ON ITS SIDE, PINNING THE EMPL OYEE UNDER THE TRUCK, CAUSING FATAL INJURIES.

June 22, 1998 KS · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor Fatality · MACHINERY
Midwest Minerals LLC · Struck by powered moving object

PLANT SUPERVISOR & EE ADJUSTED TRACKS ON DOZER. OTHER EE LEFT, & PLANT SUPERVISOR APPARENTLY STARTED TO OPERATE DOZER, IN REVERSE. HE EITHER JUMPED OR FELL OFF DOZER. DOZER STRUCK SUPERVISOR'S PICKUP, PUSHED IT OUT OF THE WAY, AND APPARENTLY RAN OVER THE SUPERVISOR, CAUSING ABDOMINAL INJURIES, FRACTURED FEMUR & PELVIS.

For insurers, brokers, and safety consultants

Where George E Nettels stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us