Mining Incidents

AG1: 2 MSHA citations Coal

Controlled by John M Lee
Hooversville, Somerset County, PA  ·  Abandoned
MSHA Mine ID: 3609575

AG1 has $200 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at AG1.

Fatalities
0
Total incidents
0
Years on record
Latest incident
Compliance record
MSHA citations since 2009
2
citations
0
significant & substantial
$200
proposed penalties
$200
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
6
inspections on record
85
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 85 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

AG1 has $200 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$200
proposed penalties
$200
current assessed
$200
paid to date
$0
outstanding
2 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2010-09-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at AG1 shows 100% of 12 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2010-09-15, 15 years ago
100%
within 1.5 mg/m3
12
samples
0.33
dust max (mg/m3)
12 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • AUGER HELPER5
  • AUGER OPERATOR5
  • COAL TRUCK DRIVER1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2010-01-27, 16 years ago
14%
over PEL
7
samples
Most-sampled occupations
  • AUGER HELPER3
  • AUGER OPERATOR3
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2010 100% 4
2009 100% 6
2008 100% 2
Noise by year
Year over PEL samples
2010 0% 2
2009 0% 3
2008 50% 2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
  1. Marquise Mining Corp 2007 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2011 0
2010 3 8,716
2009 2 9,957
2008 3 14,320
Source: MSHA quarterly employment and production, updated weekly.

AG1 sits in Somerset County, Pennsylvania, where the Census mining category is 1.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Somerset County, Pennsylvania · Population 73,255
1.6%
Mining share of county employment
$59,378
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2011 Q2 0 0 0
2011 Q1 0 0 0
2010 Q4 529 0 0 0.0
2010 Q3 282 1 0 3546.1
2010 Q2 267 0 0 0.0
2010 Q1 530 0 0 0.0
2009 Q4 396 0 0 0.0
2009 Q3 0 1 0
Show 4 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q2 452 0 0 0.0
2009 Q1 665 0 0 0.0
2008 Q4 1,343 0 0 0.0
2008 Q3 935 0 0 0.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.