The employee was cutting a piece of belt with a knife, the knife slipped cutting his left hand thumb.
Cantera Caguas Pta 5: 66 MSHA citations Metal/Non-Metal
Cantera Caguas Pta 5 has $32K in proposed MSHA penalties and $611 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Cantera Caguas Pta 5.
- Fatalities
- 0
- Total incidents
- 20
- Years on record
- 1987–2006
- Latest incident
- Dec 2006
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Cantera Caguas Pta 5 has $32K in proposed MSHA penalties and $611 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Stood as issued 2 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| SE 2008-277M | Default | Lesnick | 2010 | $16K → $16K |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2005-12-14, 20 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Nuisance dust, respirable, <1% Qtz2
- Quartz, respirable, >1% Qtz2
- Aluminum oxide fumes1
- Arsenic fumes1
Show the individual readings (21)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2005-12-14 | Quartz, respirable, >1% Qtz | 0.3 | 1.54 | 0.19 | Cleanup Man |
| 2004-12-08 | Quartz, respirable, >1% Qtz | 0.13 | 1 | 0.13 | Cleanup Man |
| 2003-06-24 | Nuisance dust, respirable, <1% Qtz | 0.14 | 10 | 0.01 | Cleanup Man |
| 2003-06-24 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2002-01-30 | Nuisance dust, respirable, <1% Qtz | 0.2 | 10 | 0.02 | Cleanup Man |
| 2001-06-07 | Cobalt fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2001-06-07 | Copper fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2001-06-07 | Iron oxide fumes | 0.07 | 10 | 0.01 | Welder, etc. |
| 2001-06-07 | Lead fumes | 0 | 150 | 0.00 | Welder, etc. |
| 2001-06-07 | Magnesium oxide fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2001-06-07 | Aluminum oxide fumes | 0.01 | 10 | 0.00 | Welder, etc. |
| 2001-06-07 | Molybdenum fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2001-06-07 | Nickel fumes | 0 | 1 | 0.00 | Welder, etc. |
| 2001-06-07 | Titanium dioxide fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2001-06-07 | Vanadium fumes | 0 | 50 | 0.00 | Welder, etc. |
| 2001-06-07 | Zinc oxide fumes | 0 | 5 | 0.00 | Welder, etc. |
| 2001-06-07 | Manganese fumes | 0.01 | 5 | 0.00 | Welder, etc. |
| 2001-06-07 | Arsenic fumes | 0 | 500 | 0.00 | Welder, etc. |
| 2001-06-07 | Beryllium fumes | 0 | 2 | 0.00 | Welder, etc. |
| 2001-06-07 | Cadmium oxide fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2001-06-07 | Chromium, insoluble | 0 | 1 | 0.00 | Welder, etc. |
Cantera Caguas Pta 5 recorded 0.00 reportable injury cases per 100 full-time workers in 2008.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2008 * | 0.00 | 0.00 | 0.000 |
| 2007 * | 0.00 | 0.00 | 0.000 |
| 2006 * | 4.35 | 4.35 | 0.000 |
| 2005 * | 0.00 | 0.00 | 0.000 |
| 2004 * | 0.00 | 0.00 | 0.000 |
| 2003 * | 0.00 | 0.00 | 0.000 |
| 2002 * | 0.00 | 0.00 | 0.000 |
| 2001 * | 0.00 | 0.00 | 0.000 |
- Marmoles Paonazzo Inc 1984 to 1987
- Marmoles Paonazzo Inc 1987 to 1998
- Empresas Master 1998 to 2006
- Master Aggregates Toa Baja Corp 2006 to present
| Year | Employees |
|---|---|
| 2010 | 0 |
| 2009 | 5 |
| 2008 | 18 |
| 2007 | 21 |
| 2006 | 23 |
| 2005 | 23 |
| 2004 | 22 |
| 2003 | 22 |
| 2002 | 20 |
| 2001 | 20 |
| 2000 | 19 |
Cantera Caguas Pta 5 sits in Guayama Municipio, Puerto Rico, where the Census mining category is 0.5% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2010 Q1 | 0 | 0 | 0 | |
| 2009 Q4 | 0 | 0 | 0 | |
| 2009 Q3 | 0 | 0 | 0 | |
| 2009 Q2 | 2,971 | 0 | 0 | 0.0 |
| 2009 Q1 | 3,857 | 0 | 0 | 0.0 |
| 2008 Q4 | 5,844 | 0 | 0 | 0.0 |
| 2008 Q3 | 3,212 | 0 | 0 | 0.0 |
| 2008 Q2 | 7,759 | 4 | 1 | 515.5 |
Show 33 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2008 Q1 | 9,811 | 3 | 0 | 305.8 |
| 2007 Q4 | 9,615 | 0 | 0 | 0.0 |
| 2007 Q3 | 10,341 | 0 | 0 | 0.0 |
| 2007 Q2 | 9,709 | 3 | 2 | 309.0 |
| 2007 Q1 | 11,153 | 4 | 4 | 358.6 |
| 2006 Q4 | 11,920 | 0 | 0 | 0.0 |
| 2006 Q3 | 10,581 | 1 | 0 | 94.5 |
| 2006 Q2 | 11,258 | 0 | 0 | 0.0 |
| 2006 Q1 | 12,171 | 0 | 0 | 0.0 |
| 2005 Q4 | 12,950 | 3 | 3 | 231.7 |
| 2005 Q3 | 12,402 | 0 | 0 | 0.0 |
| 2005 Q2 | 13,288 | 3 | 1 | 225.8 |
| 2005 Q1 | 14,210 | 0 | 0 | 0.0 |
| 2004 Q4 | 12,101 | 2 | 1 | 165.3 |
| 2004 Q3 | 10,902 | 0 | 0 | 0.0 |
| 2004 Q2 | 11,528 | 0 | 0 | 0.0 |
| 2004 Q1 | 12,267 | 1 | 0 | 81.5 |
| 2003 Q4 | 11,548 | 0 | 0 | 0.0 |
| 2003 Q3 | 11,025 | 1 | 0 | 90.7 |
| 2003 Q2 | 11,218 | 2 | 0 | 178.3 |
| 2003 Q1 | 11,721 | 0 | 0 | 0.0 |
| 2002 Q4 | 9,230 | 20 | 14 | 2166.8 |
| 2002 Q3 | 11,605 | 6 | 5 | 517.0 |
| 2002 Q2 | 11,097 | 0 | 0 | 0.0 |
| 2002 Q1 | 9,503 | 4 | 4 | 420.9 |
| 2001 Q4 | 8,303 | 1 | 1 | 120.4 |
| 2001 Q3 | 11,070 | 0 | 0 | 0.0 |
| 2001 Q2 | 12,505 | 1 | 0 | 80.0 |
| 2001 Q1 | 10,898 | 1 | 1 | 91.8 |
| 2000 Q4 | 10,379 | 0 | 0 | 0.0 |
| 2000 Q3 | 9,961 | 0 | 0 | 0.0 |
| 2000 Q2 | 11,590 | 2 | 2 | 172.6 |
| 2000 Q1 | 12,265 | 2 | 2 | 163.1 |
Reportable incidents
20 on file2006 · 1 incident
2000 · 1 incident
THE EE WAS INSTALLING THE NEW MOTOR OF THE PRIMARY CRUSHER, HE ALLEGES THAT HE OVER-USED HIS MUSCLES AND THIS CAUSED A STRONG MUSCULAR SPASM.
1999 · 2 incidents
THE EE WAS LOOSENING A SCREW OF A HYDRAULIC CYLINDER OF THE TRACKS OF A D-9 MACHINE. WHILE HE WAS PUTTING PRESSURE ON THE WRENCH, THIS ONE SLIPPED AND CRUSHED HIS LEFT HAND THUMB CAUSED A DEEP WOUND.
THE EE ALLEGES THAT WHILE HE WAS REMOVING DIRT UNDER A MACHINE WITH A SHOVEL, A LARGE ROCK FROM ABOVE FELL ON THE UPPER PART OF HIS BACK. HE FELT AN INTENSE PAIN & HAD TO KNEE DOWN, WHEN HE TR IED TO GET UP HE ALMOST COULD NOT
1996 · 2 incidents
WHEN HE WAS DISMOUNTING FROM THE VEHICLE [PICKUP] LOOSE HIS BALANCE FALLING TO THE PAVEMENT.
ACCORDING WITH THE INFORMATION OBTAINED THE EE WHEN HE WAS FALLING TO THE GROUND HE GRASP THE RAIL INJURING THE RIGHT HAND.
1995 · 1 incident
EE WAS ASSIGNED TO WORK IN A ROCK AREA. WHILE HE WAS DOING THAT (TO CLEAR THE AREA) SKIDDED ON A ROCK LOSSING THE BALANCE AND FALLING TO THE GROUND. AS THE REUSLT HE RECEIVED A CUT IN HIS RIGH T ELBOW 18.004 OPR. (THE SURFACE WAS WET)
1994 · 1 incident
THE OPERATOR INFORMED THAT HE STOPPED HIS UNIT EUCLIDES TO TIGHT THE RADIATOR CAP. WHEN HE WAS DOING THAT HE SKIDDED LOOSING THE BALANCE AND FALLING TO THE GROUND. AS THE RESULT OF THIS ACTION HE WAS INJURIED THE LEFT KNEE WITH THE BUMPER OF THE UNIT.
1993 · 2 incidents
ACCORDING TO INFORMATION OBTAINED FROM THE EMPLOYEE, THE WHEEL POWER OF THE UNIT HIT HIS LEFT ARM CAUSING AN INSIDE INJURY IN THE WRIST OF THE FOREARM.
EMPLOYEE WAS INSTALLING A BELT TO PRIMARY CRUSHER. HE SKIDED LOOSING BALANCE GRASPING PULLEY INJURING RIGHT HAND. EMPLOYEE WAS IN GOOD HEALTH. THE PAVEMENT WAS DRIED & IN GOOD CONDITION.
1992 · 1 incident
THE SUPPORT OF THE BALL FOR SOME REASON MOVED TOWARD THE CRAWLER CRANE HITTING THE SIDE AND TOP OF THE OPERATOR CABIN CAUSING THE ACCIDENT AND INJURING THE OPERATOR.
1991 · 2 incidents
OTHER EMP TRANSPORTING BEAM OF STEEL IN BUCKET OF LOADER, IT FELL OUT ROLLING DOWN HITTING EMP
OPER HEAVY EQUIPMENT LOST BALANCE JUMPED TO GROUND DORSAL STRAIN
1989 · 2 incidents
EMPLOYEE INFORMED THAT IS SUFFERING FROM SKIN DISORDERS AND RASH IN HIS BODY ESPECIALLY IN HIS LEFT LEG.
OPER TRUCK NEAR TRAXCAVATOR WHEN PC OF METAL LAID IN GROUND JUMPED HITTING HIS LEFT ARM CLOSE TO HAND
1988 · 1 incident
EMPL WAS MOVING MATERIAL WHEN HE STUCK COMPRESSOR
1987 · 4 incidents
EMPL STRIKING P3ECE OF STEEL WITH SLEDGE HAMMER WHEN PIECE OF STEEL FLEW AND HIT HIM IN RIGHT FOREARM.
EMP WAS WORKING3UNDERNEATH BULLDOZER WHEN A PIECE OF STEEL PLATE SLIPPED AND HIT THE E MP IN RIGHT EAR
EMP TRIPPED ON 5 ROCK WHILE WALKING AND FELL, STRAINING HIS BACK
EMP WAS WORKING3UNDER MACHINE AND DIESEL WENT INTO HIS EAR