Mining Incidents

CEMEX - GLENDALE: 67 MSHA citations Metal/Non-Metal

Controlled by Cemex S A
Glendale, Maricopa County, AZ  ·  Abandoned
MSHA Mine ID: 0200720

CEMEX - GLENDALE has $20K in proposed MSHA penalties and $216 outstanding across 4 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at CEMEX - GLENDALE.

Fatalities
0
Total incidents
11
Years on record
1985–2008
Latest incident
Sep 2008
Compliance record
MSHA citations since 2000
67
citations
14
significant & substantial
$19,689
proposed penalties
$14,351
paid to date
73% of proposed penalties paid to date, a $5,338 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
26
inspections on record
363
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 363 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

CEMEX - GLENDALE has $20K in proposed MSHA penalties and $216 outstanding across 4 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$20K
proposed penalties
$15K
current assessed
$14K
paid to date
$216
outstanding
65 assessments are final orders; 4 contested dockets.
Of $13K in penalties contested before the Commission, $8K was upheld in final decisions.
As of the most recent assessment on 2010-04-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.5%
significant & substantial
1.5%
high negligence or reckless
20.0%
reasonably likely or greater
52.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.8% low, 87.7% moderate, 1.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
8 citations taken to the federal commission · 12% of citations on record
  • Settled 8 · 100%
75%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
39%
Penalty reduction in decided contests
$13K proposed, $8K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2010-06-14.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2007-579M Settlement Zielinski 2008 $6K → $4K
WEST 2008-30M Settlement Zielinski 2008 $5K → $3K
WEST 2007-69M Settlement Zielinski 2007 $2K → $350
WEST 2010-1381M Settlement Lesnick 2010 $263 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2006-04-13, 20 years ago
67%
of limit-tested samples over the exposure limit
4
samples
3
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz32 over
  • Respirable dust, <.1mg1
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2006-04-13 Quartz, respirable, >1% Qtz 1.94 0.92 2.11 Laborer, Bullgang
2006-01-18 Quartz, respirable, >1% Qtz 1.32 0.97 1.36 Laborer, Bullgang
2006-01-18 Respirable dust, <.1mg 0 Crusher Oper/Worker
2006-01-18 Quartz, respirable, >1% Qtz 0.23 1.74 0.13 Mechanic
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

CEMEX - GLENDALE recorded 0.00 reportable injury cases per 100 full-time workers in 2009.

Injury rate, 2009
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.82 and the all-US-mining average was 3.36 cases per 100 workers.
In Arizona, metal and nonmetal mining averaged 2.88 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2009 * 0.00 0.00 0.000
2008 * 6.46 3.23 0.000
2007 * 2.66 2.66 0.000
2006 * 2.65 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Tanner Companies 1950 to 1987
  2. Tanner Companies 1987 to 1994
  3. United Metro Materials Inc 1994 to 2002
  4. RINKER MATERIALS WESTERN INC 2002 to 2008
  5. CEMEX Construction Materials South LLC 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2011 0
2010 9
2009 17
2008 32
2007 36
2006 36
2005 42
2004 49
2003 43
2002 40
2001 39
2000 41
Source: MSHA quarterly employment and production, updated weekly.

CEMEX - GLENDALE sits in Maricopa County, Arizona, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Maricopa County, Arizona · Population 4,491,987
0.2%
Mining share of county employment
$85,518
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2011 Q1 0 0 0
2010 Q4 3,516 0 0 0.0
2010 Q3 5,472 0 0 0.0
2010 Q2 3,839 4 0 1041.9
2010 Q1 4,556 0 0 0.0
2009 Q4 7,264 2 1 275.3
2009 Q3 6,519 0 0 0.0
2009 Q2 6,354 3 2 472.1
Show 37 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q1 10,152 0 0 0.0
2008 Q4 15,006 1 0 66.6
2008 Q3 17,199 0 0 0.0
2008 Q2 13,277 0 0 0.0
2008 Q1 16,436 1 0 60.8
2007 Q4 16,030 0 0 0.0
2007 Q3 20,062 1 0 49.8
2007 Q2 19,597 6 2 306.2
2007 Q1 19,470 0 0 0.0
2006 Q4 18,436 0 0 0.0
2006 Q3 17,579 0 0 0.0
2006 Q2 19,879 12 1 603.7
2006 Q1 19,464 11 1 565.1
2005 Q4 19,109 0 0 0.0
2005 Q3 17,537 3 1 171.1
2005 Q2 22,905 0 0 0.0
2005 Q1 24,230 1 0 41.3
2004 Q4 23,695 3 0 126.6
2004 Q3 21,176 1 0 47.2
2004 Q2 25,673 4 2 155.8
2004 Q1 23,458 0 0 0.0
2003 Q4 25,554 0 0 0.0
2003 Q3 26,480 1 0 37.8
2003 Q2 21,651 3 2 138.6
2003 Q1 21,727 0 0 0.0
2002 Q4 20,402 0 0 0.0
2002 Q3 20,469 5 0 244.3
2002 Q2 25,242 0 0 0.0
2002 Q1 21,610 0 0 0.0
2001 Q4 24,672 0 0 0.0
2001 Q3 22,390 0 0 0.0
2001 Q2 20,122 0 0 0.0
2001 Q1 21,163 0 0 0.0
2000 Q4 24,514 0 0 0.0
2000 Q3 22,110 0 0 0.0
2000 Q2 21,042 0 0 0.0
2000 Q1 21,643 3 0 138.6
No fatalities recorded at this mine.

Reportable incidents

11 on file

2008 · 2 incidents

August 4, 2008 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON

EE was climbing down the back of a ladder on a loader when he missed the bottom step and fell to the concrete floor.

2007 · 1 incident

2006 · 1 incident

2001 · 1 incident

July 11, 2001 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
United Metro Materials Inc · Struck by flying object

REMOVING TIRE FROM VEHICLE AND AIR BLAST GUN BLEW DIRT IN FACE. SMALL PIECE OF METAL PENETRATED EYE.

2000 · 3 incidents

September 14, 2000 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
United Metro Materials Inc · Struck by... (Not Elsewhere Classified)

REPAIRING TIRE-REMOVING OBJECT FROM TIRE WITH KNIFE AND CUT FINGER.

June 2, 2000 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
United Metro Materials Inc · Over-exertion in lifting objects

LIFTING TIRE AND WHEEL FROM GROUND TO STAND UPRIGHT.

May 23, 2000 AZ · Metal/Non-Metal miner, nec HANDLING OF MATERIALS
United Metro Materials Inc · Over-exertion in lifting objects

LIFTING 46 TRUCK TIRES FROM SERVICE BAY INTO WAREHOUSE, EACH TIRE WEIGHING 100-120 LBS. DELIVERY DRIVER UNLOADING TIRES ON GROUND INSTEAD OF ON DECK. FORK LIFT NOT AVAILABLE AT TIME.

1999 · 1 incident

July 6, 1999 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
United Metro Materials Inc · Fall from machine

HE WAS IN BACK OF SERVICE TRUCK. HE SLIPPED OFF TAILGATE AND HURT LEG AND ANKLE. ONE CAUSE OF THIS WAS THE FACT THAT IT WAS RAINING AND TAILGATE WAS WET.

1995 · 1 incident

November 17, 1995 AZ · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
United Metro Materials Inc · Struck against a moving object

EMPLOYEE WAS HAULING A LOAD OF OVERBURDEN TO THE ADJACENT LANDFILL WHEN HE LOST CONTROL AT A CURVE IN THE HAUL ROAD, CAUSING THE TRUCK TO ROLL.

1985 · 1 incident

July 3, 1985 AZ · Metal/Non-Metal OTHER
Tanner Companies · (Not Elsewhere Classified)

INFECTION OF L RING FINGER AFTER SCRATCH.