Mining Incidents

CEMEX - JOMAX: 26 MSHA citations Metal/Non-Metal

Controlled by Cemex S A
Phoenix, Maricopa County, AZ  ·  Abandoned
MSHA Mine ID: 0202917

CEMEX - JOMAX has $3K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at CEMEX - JOMAX.

Fatalities
0
Total incidents
2
Years on record
2002–2005
Latest incident
Dec 2005
Compliance record
MSHA citations since 2002
26
citations
3
significant & substantial
$3,296
proposed penalties
$3,296
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
19
inspections on record
241
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 241 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

CEMEX - JOMAX has $3K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
26 assessments are final orders; 2 contested dockets.
Of $2K in penalties contested before the Commission, $2K was upheld in final decisions.
As of the most recent assessment on 2009-02-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
11.5%
significant & substantial
19.2%
high negligence or reckless
11.5%
reasonably likely or greater
53.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 15.4% low, 65.4% moderate, 19.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 19% of citations on record
  • Settled 4 · 80%
  • Stood as issued 1 · 20%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$2K proposed, $2K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2007-08-01.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2007-742M Settlement Zielinski 2007 $860 → $860
WEST 2006-404M Default Lesnick 2006 $700 → $700
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2006-01-11, 20 years ago
0%
of limit-tested samples over the exposure limit
12
samples
5
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg6
  • Quartz, respirable, >1% Qtz3
  • Aluminum oxide fumes1
  • Arsenic fumes1
Show the individual readings (26)
Date Contaminant Concentration Limit Conc / limit Occupation
2006-01-11 Respirable dust, <.1mg 0 Crusher Oper/Worker
2006-01-11 Quartz, respirable, >1% Qtz 0.21 0.75 0.28 Truck Driver
2006-01-11 Unlisted Particulate, respirable, <1% Qtz 0.13 Backhoe Operator
2006-01-11 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-11-25 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2003-11-25 Chromium, insoluble 0 3 0.00 Welder, etc.
2003-11-25 Cobalt fumes 0 300 0.00 Welder, etc.
2003-11-25 Copper fumes 0 300 0.00 Welder, etc.
2003-11-25 Iron oxide fumes 0 20 0.00 Welder, etc.
2003-11-25 Lead fumes 0 450 0.00 Welder, etc.
2003-11-25 Magnesium oxide fumes 0 20 0.00 Welder, etc.
2003-11-25 Molybdenum fumes 0 20 0.00 Welder, etc.
2003-11-25 Nickel fumes 0 3 0.00 Welder, etc.
2003-11-25 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2003-11-25 Vanadium fumes 0 50 0.00 Welder, etc.
2003-11-25 Zinc oxide fumes 0.01 10 0.00 Welder, etc.
2003-11-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-11-25 Respirable dust, <.1mg 0 Truck Driver
2003-11-25 Respirable dust, <.1mg 0 Crusher Oper/Worker
2003-11-25 Manganese fumes 0 5 0.00 Welder, etc.
2003-11-25 Aluminum oxide fumes 0 20 0.00 Welder, etc.
2003-11-25 Arsenic fumes 0 1500 0.00 Welder, etc.
2003-11-25 Beryllium fumes 0 6 0.00 Welder, etc.
2003-05-14 Quartz, respirable, >1% Qtz 0.12 0.93 0.13 Truck Driver
2003-05-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-05-14 Quartz, respirable, >1% Qtz 0.32 0.69 0.46 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

CEMEX - JOMAX recorded 0.00 reportable injury cases per 100 full-time workers in 2007.

Injury rate, 2007
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.30 and the all-US-mining average was 3.77 cases per 100 workers.
In Arizona, metal and nonmetal mining averaged 3.93 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 8.00 0.00 0.000
2004 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. United Metro Materials Inc 2001 to 2002
  2. Rinker Materials Western Inc. 2002 to 2008
  3. CEMEX Construction Materials South LLC 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2009 4
2008 8
2007 13
2006 14
2005 11
2004 10
2003 8
2002 5
2001 6
Source: MSHA quarterly employment and production, updated weekly.

CEMEX - JOMAX sits in Maricopa County, Arizona, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Maricopa County, Arizona · Population 4,491,987
0.2%
Mining share of county employment
$85,518
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q1 1,711 1 0 584.5
2008 Q4 2,885 0 0 0.0
2008 Q3 4,067 0 0 0.0
2008 Q2 3,608 2 0 554.3
2008 Q1 5,506 2 0 363.2
2007 Q4 6,165 0 0 0.0
2007 Q3 5,747 0 0 0.0
2007 Q2 5,080 3 0 590.6
Show 25 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q1 5,839 4 0 685.0
2006 Q4 5,895 0 0 0.0
2006 Q3 5,724 0 0 0.0
2006 Q2 6,746 1 0 148.2
2006 Q1 6,041 2 1 331.1
2005 Q4 6,559 0 0 0.0
2005 Q3 6,760 4 1 591.7
2005 Q2 7,072 0 0 0.0
2005 Q1 4,605 0 0 0.0
2004 Q4 4,917 0 0 0.0
2004 Q3 6,279 0 0 0.0
2004 Q2 5,565 1 0 179.7
2004 Q1 4,634 0 0 0.0
2003 Q4 5,188 3 0 578.3
2003 Q3 5,895 0 0 0.0
2003 Q2 5,461 2 1 366.2
2003 Q1 2,062 0 0 0.0
2002 Q4 2,194 0 0 0.0
2002 Q3 2,472 1 0 404.5
2002 Q2 2,831 0 0 0.0
2002 Q1 2,181 0 0 0.0
2001 Q4 2,817 0 0 0.0
2001 Q3 2,753 0 0 0.0
2001 Q2 3,001 0 0 0.0
2001 Q1 4,056 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2005 · 1 incident

2002 · 1 incident

August 19, 2002 AZ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
United Metro Materials Inc · Struck by... (Not Elsewhere Classified)

EE WAS CUTTING A PIECE OF RUBBER BELTING WHEN THE UTILITY KNIFE HE WAS USING CUT THROUGH THE BELTING AND CUT THE UNDERSIDE OF HIS LEFT FOREARM CAUSING A 3/4" LACERATION.