CLODINE PIT has $17K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at CLODINE PIT.
Fatalities
0
Total incidents
12
Years on record
1985–2006
Latest incident
Jul 2006
Compliance record
MSHA citations since 2000
61
citations
18
significant & substantial
$16,825
proposed penalties
$16,825
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
25
inspections on record
315
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 315 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
CLODINE PIT has $17K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$17K
proposed penalties
$17K
current assessed
$17K
paid to date
$0
outstanding
57 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-12-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q4
5,412
4
2
739.1
2007 Q3
7,058
0
0
0.0
2007 Q2
14,828
0
0
0.0
2007 Q1
17,486
0
0
0.0
2006 Q4
17,592
4
1
227.4
2006 Q3
18,392
0
0
0.0
2006 Q2
18,570
10
2
538.5
2006 Q1
20,709
11
4
531.2
Show 24 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q4
20,694
0
0
0.0
2005 Q3
19,846
0
0
0.0
2005 Q2
22,889
7
1
305.8
2005 Q1
18,542
0
0
0.0
2004 Q4
21,705
0
0
0.0
2004 Q3
18,721
0
0
0.0
2004 Q2
22,017
4
0
181.7
2004 Q1
19,515
0
0
0.0
2003 Q4
16,765
2
1
119.3
2003 Q3
19,566
0
0
0.0
2003 Q2
18,222
4
1
219.5
2003 Q1
19,253
0
0
0.0
2002 Q4
19,533
0
0
0.0
2002 Q3
22,024
0
0
0.0
2002 Q2
21,108
2
0
94.8
2002 Q1
21,024
0
0
0.0
2001 Q4
20,712
4
1
193.1
2001 Q3
23,379
0
0
0.0
2001 Q2
22,374
5
2
223.5
2001 Q1
24,972
0
0
0.0
2000 Q4
23,802
0
0
0.0
2000 Q3
28,826
3
2
104.1
2000 Q2
21,048
0
0
0.0
2000 Q1
22,783
1
1
43.9
No fatalities recorded at this mine.
Reportable incidents
12 on file
2006 · 1 incident
July 16, 2006TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDTOOLS (NONPOWERED)
107 & 106 conveyors had overloaded & tripped out. Therefore, choked up the chute that they were working on. The employee used a bar with a hook on it to move the clay around. In the process of getting the system back on line he hurt his right shoulder.
2005 · 1 incident
October 23, 2005TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorPOWERED HAULAGE
TXI Operations LP · Caught in, under or between a moving and a stationary object
A PIECE OF SHEET METAL GOT CAUGHT UNDER THE 108/102 TRANSFER POINT. HE WAS PULLING THE METAL SHEET OUT AND IT CAUGHT ON THE TRANSFER POINT HIS HAND SLIPPED AND THE SHEET METAL CUT THROUGH HIS GLOVES.
REPLACING A FLEXIBLE CONDUIT ON #3 KILN VARIBLE SPEED DRIVE. EE WAS STANDING ON MOTOR AND EDGE OF TANK BASE. THE BASE HAD OIL AND WAS A BIT ICY. HE WENT TO MOVE AND SLIPPED, HE PUSHED HIMSELF AWAY FROMT HE TANK AND LANDED ONT HE GROUND 3.5 FEET BELOW. HE LANDED ON HIS ANKLE. HE STRETCHED A TENDON IN THE TOP OF HIS FOOT. X RAY WAS NEGATIVE.
2000 · 1 incident
April 10, 2000TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
EE STEPPED OFF OF BOTTOM STEP ONTO WET GROUND HIS FOOT SLIPPED ON THE WET GROUND & HE GRABBED THE HANDRAIL TO CATCH HIS BALANCE. ON 4/11/00 HEREPORTED HIS INJURY TO ANOTHER EE BUT CONTINUED WORKING WITH LOWER BACK PAIN. HIS FIRST DAY TO MISS WORK WAS 4/21/00
1991 · 3 incidents
July 29, 1991TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorPOWERED HAULAGE
EMPLOYEE WAS DRIVING TRUCK. HE DROVE OVER A PILEOF HOT MIX WITH DRIVERS SIDE WHEELS. DRIVER WAS THROWN FROM SEAT & LANDED ON TOP OF GEAR SHIFTERBRUISING RIGHT LEG. HE WAS NOT WEARING A SEAT BELT.
May 22, 1991TX · Metal/Non-Metalassistant mine foreman, assistant mine managerSLIP OR FALL OF PERSON
EXITED BLOCK BUILDING AND STEPPED DOWN 3 STEPS. HE LOST HIS BALANCE ON THE LAST AND SPRAINED HISANKLE ON THE GROUND. INJURY CAUSED A SLIGHT FACTURE IN THE RIGHT ANKLE.
January 28, 1991TX · Metal/Non-Metalbackhoe operator, trackhoe operatorMACHINERY
MISTING RAIN AND WET CLAY I NAME INJURED EMPL STATED HE MOVED THE CATERPILLAR 615 SCRAPER INTO THE SMALL SHED OU OF RAIN I NAME DISMOUNTED THE SCRAPER LOST HIS BALANCE FELL BACKWWARDS TO HIS L SIDE BREAKING HIS FALL WITH L HAND I NAME INJURED HIS L WRIST
May 11, 1988TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSTRIKING OR BUMPING
THE EMPLOYEE WAS WALKING ALONG THE SIDE OF CONVEYOR BELT AT A FAST PACE WHEN HIS RIGHT FOREARM CAME INTO CONTACT WITH A SHARP EDGE OF EXPANDED METAL,CUTTING HIS ARM.
1985 · 1 incident
January 4, 1985TX · Metal/Non-Metalwelder (shop)MACHINERY
AIR ARCING AFTER DARK AND BURNED EYES REQUIRING MEDICAL ASSISTANCE
For insurers, brokers, and safety consultants
The full compliance file on CLODINE PIT
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.