TXI Owen Plant has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at TXI Owen Plant.
Fatalities
0
Total incidents
15
Years on record
2000–2008
Latest incident
Apr 2008
Compliance record
MSHA citations since 2001
19
citations
3
significant & substantial
$1,449
proposed penalties
$1,449
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
24
inspections on record
242
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 242 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
TXI Owen Plant has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
18 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2009-08-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2010 Q3
682
0
0
0.0
2010 Q1
0
0
0
2009 Q4
0
0
0
2009 Q3
120
2
0
16666.7
2009 Q2
494
0
0
0.0
2009 Q1
1,902
0
0
0.0
2008 Q4
3,933
0
0
0.0
2008 Q3
5,485
0
0
0.0
Show 34 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2008 Q2
7,273
0
0
0.0
2008 Q1
11,028
1
0
90.7
2007 Q4
8,287
0
0
0.0
2007 Q3
7,147
0
0
0.0
2007 Q2
7,949
0
0
0.0
2007 Q1
7,311
0
0
0.0
2006 Q4
5,718
1
0
174.9
2006 Q3
5,710
0
0
0.0
2006 Q2
5,566
0
0
0.0
2006 Q1
2,727
0
0
0.0
2005 Q4
1,890
1
0
529.1
2005 Q3
2,367
0
0
0.0
2005 Q2
5,535
0
0
0.0
2005 Q1
6,153
0
0
0.0
2004 Q4
4,715
1
0
212.1
2004 Q3
4,147
0
0
0.0
2004 Q2
3,596
0
0
0.0
2004 Q1
3,224
2
0
620.3
2003 Q4
10,770
2
0
185.7
2003 Q3
9,125
0
0
0.0
2003 Q2
7,856
0
0
0.0
2003 Q1
6,946
0
0
0.0
2002 Q4
7,829
0
0
0.0
2002 Q3
10,603
1
0
94.3
2002 Q2
11,123
0
0
0.0
2002 Q1
9,823
0
0
0.0
2001 Q4
9,136
7
3
766.2
2001 Q3
9,951
0
0
0.0
2001 Q2
5,824
1
0
171.7
2001 Q1
8,659
0
0
0.0
2000 Q4
8,214
0
0
0.0
2000 Q3
9,407
0
0
0.0
2000 Q2
7,480
0
0
0.0
2000 Q1
8,748
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
15 on file
2008 · 2 incidents
April 2, 2008TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Employee was in the process of removing the blower motor from a A30 Volvo haul unit. He was sitting on the fender of the haul unit when the ratchet he was using to remove the blower motor slipped and he slid off the fender into the back of his pickup truck. His right ring finger dislocated when it came in contact with the pickup truck.
2007 · 4 incidents
December 3, 2007TX · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverHANDLING OF MATERIALS
Employee was cutting some 1/2" holes into some skirtboard rubber with a boxcutter when it slipped cutting his left hand at thumb between thumb knuckle & wrist. Required 9 stitches.
June 18, 2007TX · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
Employee was removing guard to replace v-belts @ headpulley of conveyor. Lifted about 4" and wouldn't budge. Reached down down grab guard & pickup on, when guard dropped back into place, severing tip of middle finger on left hand.
June 1, 2007TX · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
Employee was installing dresser coupling on cyclone pump, when it slipped and cut open the pads of his right ring & middle fingers, requiring stitches.
2006 · 2 incidents
December 5, 2006TX · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerSLIP OR FALL OF PERSON
EE stopped haul unit at lab to speak w/plant operator. As he started walking to operator, after exiting haul unit, he tripped and fell. He tried to stop his fall w/his left forearm... in the process hurting his left shoulder.
Operating dragline, pressing on brake he felt a catch in his right knee. Machine is more difficult to operate due to being a manual machine with no air or hydraulic assist.
February 10, 2005TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EE STRAIGHTENING YIELD SIGN, HAD BOTH ARMS AROUND SIGN WHILE APPLYING PRESSURE. AS EE WAS APPLYING PRESSURE, SHOULDER POPPED. RELEASED PRESSURE FROM AROUND SIGN AND MOVED ARM AROUND TO SEE IF IT WAS HURT OR A "NORMAL POP", WAS JUST A LITTLE SORE. COMPLETED TASK & TOOK SOME IBUPROPHEN. REPORTED INCIDENT NEXT MORNING
EE WAS TAKING A LOAD OF MATERIAL TO OUR HOPPER IN HIS HAUL TRUCK. HE SNEEZED & JERKED HIS WHEEL, IN DOING SO HE RAN OVER ONE OF OUR CONCRETE BLOCKS THAT WE HAVE LINED ALONG OUR HAUL ROAD. WH EN HE RAN OVER IT, HE SLAMMED HIS HEAD IN THE INSIDE OF THE CAB, OF THE HAUL UNITS WINDOW LATCH CAUSING A CONCUSION.
EE WAS STANDING ON RT FRONT FENDER OF HAUL UNIT CLEANING MIRROR; WHILE STEPPING DOWN TO GET OFF, HE LOST FOOTING & FELL 4 FT TO GROUND. FALL CAUSED STRAIN TO LT KNEE & LT HIP.
2002 · 1 incident
November 19, 2002TX · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
LOWER BACK PAIN GOING TO CHIROPRACTOR WAS ON LIGHT DUTY
For insurers, brokers, and safety consultants
The full compliance file on TXI Owen Plant
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.