Mining Incidents

MALONE QUARRY: 67 MSHA citations Metal/Non-Metal

Controlled by Colas S A
Malone, Franklin County, NY  ·  Abandoned
MSHA Mine ID: 3002650

MALONE QUARRY has $10K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at MALONE QUARRY.

Fatalities
0
Total incidents
22
Years on record
1987–2022
Latest incident
Oct 2022
Compliance record
MSHA citations since 2000
67
citations
12
significant & substantial
$10,244
proposed penalties
$10,121
paid to date
99% of proposed penalties paid to date, a $123 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
24
inspections on record
550
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 550 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
2
Section 107(a) orders
Most recent order: 2015-10-26.
On record since 2013.
Source: MSHA imminent-danger order records, updated weekly.

MALONE QUARRY has $10K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$10K
current assessed
$10K
paid to date
$0
outstanding
64 assessments are final orders; 1 contested dockets.
Of $123 in penalties contested before the Commission, $0 was upheld in final decisions.
As of the most recent assessment on 2021-10-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
18.5%
significant & substantial
4.6%
high negligence or reckless
18.5%
reasonably likely or greater
60.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 40.0% low, 55.4% moderate, 4.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 1% of citations on record
  • Stood as issued 1 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
100%
Penalty reduction in decided contests
$123 proposed, $0 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2020-09-10.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2020-0094 Dismissal Bulluck 2021 $123 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-09-29, 5 years ago
0%
of limit-tested samples over the exposure limit
31
samples
14
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz16
  • Respirable dust, <.1mg14
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (31)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-09-29 Quartz, respirable, >1% Qtz 0.17 Laborer, Bullgang
2020-09-29 Quartz, respirable, >1% Qtz 0.13 Laborer, Bullgang
2020-09-29 Respirable dust, <.1mg 0 Laborer, Bullgang
2015-10-27 Quartz, respirable, >1% Qtz 0.21 0.61 0.34 Crusher Oper/Worker
2015-10-27 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-10-27 Quartz, respirable, >1% Qtz 0.22 0.92 0.24 Utility Man
2013-09-17 Quartz, respirable, >1% Qtz 0.68 0.79 0.86 Cleanup Man
2013-09-17 Respirable dust, <.1mg 0 Truck Driver
2008-07-09 Unlisted Particulate, respirable, <1% Qtz 0.13 Front-end Loader Operator
2008-07-09 Quartz, respirable, >1% Qtz 0.21 0.65 0.32 Utility Man
2008-07-09 Respirable dust, <.1mg 0 Truck Driver
2008-07-09 Quartz, respirable, >1% Qtz 0.22 0.81 0.27 Crusher Oper/Worker
2008-07-09 Quartz, respirable, >1% Qtz 0.15 0.72 0.21 Utility Man
2006-10-26 Quartz, respirable, >1% Qtz 0.52 1.44 0.36 Crusher Oper/Worker
2006-10-26 Quartz, respirable, >1% Qtz 0.43 0.77 0.56 Utility Man
2006-04-19 Quartz, respirable, >1% Qtz 0.14 0.73 0.19 Crusher Oper/Worker
2006-04-19 Quartz, respirable, >1% Qtz 0.33 0.71 0.46 Laborer, Bullgang
2006-04-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-04-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2005-06-29 Respirable dust, <.1mg 0 Truck Driver
2005-06-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2005-06-29 Quartz, respirable, >1% Qtz 0.83 3.14 0.26 Crusher Oper/Worker
2005-06-29 Quartz, respirable, >1% Qtz 0.21 0.75 0.28 Laborer, Bullgang
2004-05-05 Quartz, respirable, >1% Qtz 0.22 0.98 0.22 Truck Driver
2004-05-05 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-05-05 Respirable dust, <.1mg 0 Crusher Oper/Worker
2004-05-05 Respirable dust, <.1mg 0 Utility Man
2002-05-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-05-22 Respirable dust, <.1mg 0 Crusher Oper/Worker
2002-05-22 Respirable dust, <.1mg 0 Truck Driver
2002-05-22 Quartz, respirable, >1% Qtz 0.24 0.73 0.33 Utility Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

MALONE QUARRY recorded 9.16 reportable injury cases per 100 full-time workers in 2012.

Injury rate, 2012
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.16
total case rate
9.16
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.48 and the all-US-mining average was 2.96 cases per 100 workers.
In New York, metal and nonmetal mining averaged 3.20 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2012 * 9.16 9.16 0.000
2008 * 0.00 0.00 0.000
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Malone Quarry 1984 to 2004
  2. GRAYMONT MATERIALS (NY) INC 2004 to 2017
  3. Upstone Materials Inc. 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2023 0
2022 8
2021 7
2020 9
2019 8
2018 7
2017 7
2016 9
2015 11
2014 11
2013 10
2012 11
2011 10
2010 10
2009 8
2008 14
2007 12
2006 11
2005 8
2004 9
2003 10
2002 9
2001 8
2000 9
Source: MSHA quarterly employment and production, updated weekly.

MALONE QUARRY sits in Franklin County, New York, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Franklin County, New York · Population 47,066
0.1%
Mining share of county employment
$63,747
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2023 Q1 0 0 0
2022 Q4 3,013 0 0 0.0
2022 Q3 4,776 0 0 0.0
2022 Q2 4,542 0 0 0.0
2022 Q1 1,069 0 0 0.0
2021 Q4 4,207 3 0 713.1
2021 Q3 3,768 0 0 0.0
2021 Q2 3,724 0 0 0.0
Show 85 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q1 736 0 0 0.0
2020 Q4 1,015 0 0 0.0
2020 Q3 8,330 5 1 600.2
2020 Q2 5,331 4 1 750.3
2020 Q1 1,270 0 0 0.0
2019 Q4 2,933 0 0 0.0
2019 Q3 6,970 0 0 0.0
2019 Q2 6,430 0 0 0.0
2019 Q1 1,562 0 0 0.0
2018 Q4 3,654 7 1 1915.7
2018 Q3 5,658 0 0 0.0
2018 Q2 4,667 0 0 0.0
2018 Q1 2,170 0 0 0.0
2017 Q4 3,189 2 0 627.2
2017 Q3 5,749 0 0 0.0
2017 Q2 3,968 0 0 0.0
2017 Q1 903 0 0 0.0
2016 Q4 2,464 1 0 405.8
2016 Q3 5,965 0 0 0.0
2016 Q2 4,453 0 0 0.0
2016 Q1 1,440 0 0 0.0
2015 Q4 1,615 8 2 4953.6
2015 Q3 3,945 0 0 0.0
2015 Q2 3,620 0 0 0.0
2015 Q1 736 0 0 0.0
2014 Q4 2,186 0 0 0.0
2014 Q3 4,783 2 0 418.1
2014 Q2 4,146 0 0 0.0
2014 Q1 1,665 0 0 0.0
2013 Q4 3,418 0 0 0.0
2013 Q3 6,167 8 1 1297.2
2013 Q2 5,428 0 0 0.0
2013 Q1 1,551 0 0 0.0
2012 Q4 3,647 1 0 274.2
2012 Q3 8,050 0 0 0.0
2012 Q2 7,336 0 0 0.0
2012 Q1 2,809 0 0 0.0
2011 Q4 5,541 6 2 1082.8
2011 Q3 5,654 0 0 0.0
2011 Q2 4,121 2 0 485.3
2011 Q1 1,212 0 0 0.0
2010 Q4 2,208 0 0 0.0
2010 Q3 5,505 0 0 0.0
2010 Q2 5,552 1 0 180.1
2010 Q1 2,064 0 0 0.0
2009 Q4 2,426 0 0 0.0
2009 Q3 5,970 0 0 0.0
2009 Q2 5,347 0 0 0.0
2009 Q1 1,518 0 0 0.0
2008 Q4 4,918 1 0 203.3
2008 Q3 9,560 3 2 313.8
2008 Q2 8,910 0 0 0.0
2008 Q1 2,464 0 0 0.0
2007 Q4 6,852 0 0 0.0
2007 Q3 8,343 0 0 0.0
2007 Q2 6,841 0 0 0.0
2007 Q1 2,458 0 0 0.0
2006 Q4 5,858 1 0 170.7
2006 Q3 7,590 0 0 0.0
2006 Q2 7,588 0 0 0.0
2006 Q1 2,933 0 0 0.0
2005 Q4 3,666 0 0 0.0
2005 Q3 6,596 0 0 0.0
2005 Q2 4,607 5 0 1085.3
2005 Q1 1,954 0 0 0.0
2004 Q4 2,941 0 0 0.0
2004 Q3 7,972 0 0 0.0
2004 Q2 5,042 2 0 396.7
2004 Q1 1,324 0 0 0.0
2003 Q4 4,791 0 0 0.0
2003 Q3 7,004 0 0 0.0
2003 Q2 5,795 0 0 0.0
2003 Q1 1,902 0 0 0.0
2002 Q4 4,075 0 0 0.0
2002 Q3 6,555 0 0 0.0
2002 Q2 6,183 3 2 485.2
2002 Q1 1,551 0 0 0.0
2001 Q4 3,523 0 0 0.0
2001 Q3 6,534 0 0 0.0
2001 Q2 4,963 0 0 0.0
2001 Q1 1,489 0 0 0.0
2000 Q4 4,693 0 0 0.0
2000 Q3 5,507 1 0 181.6
2000 Q2 5,792 0 0 0.0
2000 Q1 2,423 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

22 on file

2022 · 2 incidents

October 19, 2022 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Upstone Materials Inc. · Caught in, under or between a moving and a stationary object

The miner was backing the haul truck into the shop to be repaired and caught their hand between the truck's catwalk handrail system and the garage door frame. The handrail system was bent, and the employee reached through the cab window to pull it in while backing in. The impact caused a contusion to EE's left hand.

April 6, 2022 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Upstone Materials Inc. · Struck by... (Not Elsewhere Classified)

Employee was cutting belting when the knife slipped out of the belting resulting in a small laceration to EE's right thigh.

2019 · 1 incident

May 6, 2019 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Upstone Materials Inc. · Struck by... (Not Elsewhere Classified)

Employee was trimming skirting with a utility knife. The knife slipped out of the rubber skirting and stabbed the employee in the right thigh.

2018 · 1 incident

August 21, 2018 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Upstone Materials Inc. · Over-exertion in lifting objects

Employee was moving a 10 foot piece of 2X4 box beam and felt something snap in EE's left arm. Employee was evaluated in the ER and referred to an orthopedic for further evaluation. Orthopedic diagnosed injury as ruptured tendon and scheduled surgery for 8/28/2018.

2016 · 1 incident

July 14, 2016 NY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
GRAYMONT MATERIALS (NY) INC · Caught in, under or between a moving and a stationary object

Employee was moving the forks on the forklift and pinched a finger between the fork and frame resulting in a contusion/laceration.

2015 · 1 incident

October 23, 2015 NY · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDLING OF MATERIALS
GRAYMONT MATERIALS (NY) INC · Over-exertion (Not Elsewhere Classified)

Employee was climbing a small ladder to access the catwalk of the Deister return conveyor. Upon entering the catwalk the employee grabbed the handrails and transferred all of his weight to his left foot and heard a snap and felt a sharp pain in his left foot. The employee was taken to the local ER to be evaluated and was diagnosed with a fracture of the fifth metatarsal bone.

2012 · 1 incident

July 24, 2012 NY · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
GRAYMONT MATERIALS (NY) INC · Over-exertion in lifting objects

EE was shoveling under the primary tail pulley conveyor after the plant was shut down and he developed pain in his lower back. This was his normal job. The pain was bad enough that ee had it checked out at the emergency room and they said to rest for 5 days.

2010 · 1 incident

June 8, 2010 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
GRAYMONT MATERIALS (NY) INC · Fall to the walkway or working surface

EE was prying on a screen cover when slipped and fell dislocating his clavicle. He continued working and later went to the emergency room and they put it back in place. He will be off work for about two weeks.

2004 · 1 incident

August 31, 2004 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
GRAYMONT MATERIALS (NY) INC · Over-exertion (Not Elsewhere Classified)

Because of heavy rain, the crushing crew had to shovel before they could start up. Ee stepped off the concrete pad and his foot slipped in the mud. He tried to catch himself and when he brought his other foot around, he twisted his ankle and caused a fracture in the ankle area.

2001 · 1 incident

October 30, 2001 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Malone Quarry · Over-exertion in lifting objects

STRAINED BACK WHILE LIFTING AIR COMPRESSOR INTO PLACE IN A LOADER.

1998 · 1 incident

June 30, 1998 NY · Metal/Non-Metal utility man, errand boy, service truck operator POWERED HAULAGE
Malone Quarry · Struck by... (Not Elsewhere Classified)

SMALL ROCK CAME OFF CRUSHER BELT, STRUCK EE'S HARD HAT CAUSING SMALL CUT TO HEAD

1997 · 2 incidents

September 29, 1997 NY · Metal/Non-Metal utility man, errand boy, service truck operator MACHINERY
Malone Quarry · Struck by falling object

WAS CLEANING UNDER CRUSHER AREA WHEN STONE FELL FROM HOPPER/FEEDER AREA

1993 · 1 incident

1992 · 2 incidents

May 19, 1992 NY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Malone Quarry · Struck by falling object

WHILE SHOVELING AT CRUSHER, A ROCK FROM THE TOP OF THE FEEDER FELL AND STRUCK EMPLOYEE IN LEFT SHOULDER AREA.

March 17, 1992 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Malone Quarry · Absorption of radiations, caustics, toxic and noxious substances

WHILE INSTALLING BATTERIES IN EUCLID COVER OPPED OFF AND BATTERY ACID SPLASHED INTO EE S LEFT EYE.

1991 · 1 incident

July 29, 1991 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Malone Quarry · Caught in, under or between a moving and a stationary object

EMPL WAS ROLLING V BELTS BY HAND WHEN FINGER WENT INTO SHEAVE CAUSING LOSS OF TIP OF LEFT MIDDLE FINGER.

1990 · 2 incidents

November 8, 1990 NY · Metal/Non-Metal fireman - locomotive, railroad clam operator, timekeeper, yard engine operator MACHINERY
Malone Quarry · Fall to the walkway or working surface

WHILE STARTING BACKHOE, FROM THE GROUND, AND WHILE BACKHOE WAS IN GEAR, BACKHOE MOVED FORWARD DRAGGING EMPLOYEE.

July 26, 1990 NY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Malone Quarry · Struck against stationary object

WHILE SHOVELING AT CRUSHER L INDEX FINGER STRUCK PC OF METAL SCREEN CAUSING CUT TO FINGER

1987 · 3 incidents

July 24, 1987 NY · Metal/Non-Metal EXPLOSIVES AND BREAKING AGENTS
Malone Quarry · Accident type, without injuries

AN ELECTRICAL S7ORM WAS APPROACHING THE MINE WHILE A BLAST WAS BEING LOADED.ALL BLAST PERSONNEL AND MINE PERSONNEL EVACUATED TO A SAFE AREA. LATER,THREE HOLES PREMATURELY DETONATED DUE TO LIGH TNING.THERE WAS3'T ANY DAMAGE OR IMPAIRMENT RESULTING.