Mining Incidents

PIT #49 GRETNA: 10 MSHA citations Metal/Non-Metal

Controlled by CRH PLC
Sarpy, Sarpy County, NE  ·  Abandoned
MSHA Mine ID: 2501047

PIT #49 GRETNA has $670 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at PIT #49 GRETNA.

Fatalities
0
Total incidents
7
Years on record
1987–2003
Latest incident
Apr 2003
Compliance record
MSHA citations since 2003
10
citations
1
significant & substantial
$670
proposed penalties
$670
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
10
inspections on record
69
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 69 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

PIT #49 GRETNA has $670 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$670
proposed penalties
$670
current assessed
$670
paid to date
$0
outstanding
10 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2003-10-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
10.0%
significant & substantial
0.0%
high negligence or reckless
10.0%
reasonably likely or greater
90.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.0% low, 90.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

PIT #49 GRETNA recorded 7.75 reportable injury cases per 100 full-time workers in 2003.

Injury rate, 2003
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
7.75
total case rate
7.75
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.76 and the all-US-mining average was 4.43 cases per 100 workers.
In Nebraska, metal and nonmetal mining averaged 3.99 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2003 * 7.75 7.75 0.000
2002 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Martin Marietta Aggregates 1985 to 1998
  2. Lyman-Richey Sand & Gravel Company 1998 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2005 0
2004 2
2003 9
2002 9
2001 4
2000 3
Source: MSHA quarterly employment and production, updated weekly.

PIT #49 GRETNA sits in Sarpy County, Nebraska, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Sarpy County, Nebraska · Population 194,051
0.1%
Mining share of county employment
$101,402
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q4 0 0 0
2005 Q3 0 0 0
2005 Q2 0 0 0
2005 Q1 0 0 0
2004 Q4 0 0 0
2004 Q3 0 0 0
2004 Q2 899 0 0 0.0
2004 Q1 3,268 0 0 0.0
Show 16 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2003 Q4 5,805 7 0 1205.9
2003 Q3 5,880 0 0 0.0
2003 Q2 8,391 3 1 357.5
2003 Q1 5,741 0 0 0.0
2002 Q4 7,555 0 0 0.0
2002 Q3 8,134 0 0 0.0
2002 Q2 7,855 0 0 0.0
2002 Q1 3,012 0 0 0.0
2001 Q4 4,068 0 0 0.0
2001 Q3 3,710 0 0 0.0
2001 Q2 1,581 0 0 0.0
2001 Q1 0 0 0
2000 Q4 0 0 0
2000 Q3 0 0 0
2000 Q2 2,085 0 0 0.0
2000 Q1 3,222 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2003 · 1 incident

April 22, 2003 NE · Metal/Non-Metal barge/boat/dredge/towbarge/towboat/leach operator, riverman, deck hand HANDLING OF MATERIALS
Lyman-Richey Sand & Gravel Company · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS REPAIRING WENCH ON DREDGE WHILE STANDING ON A WET HOSE. HE SLIPPED AND TRIED TO CATCH HIMSELF WITH HIS RIGHT ARM. THE EMPLOYEE RUPTURED HIS RIGHT BICEP MUSCLE REQUIRING SURGERY.

1999 · 1 incident

December 4, 1999 NE · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Lyman-Richey Sand & Gravel Company · Fall from machine

EE WAS IN PROCESS OF WASHING OUT THE PLANT, SO NO MATERIAL WOULD FREEZE IN THE EQUIPMENT OVERNIGHT. THE PLANT WAS SHUT DOWN FOR THIS SHIFT UNTIL A PUMP BEARING COULD BE REPLACED. HE DROVE THE FRONT END LOADER OVER & RAISED THE BUCKET ABOUT 6' OFF THE GROUND. HE TURNED IT OFF. HE WAS CLIMBING UP INTO THE LOADER BUCKET WHEN SLIPPED & FELL TO THE GROUND FROM 6' UP, BREAKING HIS RT ARM

1998 · 1 incident

November 16, 1998 NE · Metal/Non-Metal outside foreman, leadman MACHINERY
Lyman-Richey Sand & Gravel Company · Struck by flying object

THE EMPLOYEE WAS USING AN AIR IMPACT WRENCH TO CHANGE SOME SCREENS, WHEN THE AIR FROM THE IMPACT GUN BLEW SOME SAND INTO HIS RIGHT EYE, EVEN THOUGH HE HAD SAFETY GLASSES ON. THIS SAN DSCRATCH ED HIS EYE, HE RECEIVED AN ANTIBIOTIC PRESCRIPTION FOR HIS EYE.

1996 · 1 incident

July 12, 1996 NE · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck against stationary object

EMP WAS TIGHTENING SCREEN BOLT WHEN WRENCH SLIPPED OFF AND HAND STRUCK THE EDGE OF SCREEN CAUSING CUT TO FINGER REQUIRING 3 STITCHES.

1995 · 1 incident

May 24, 1995 NE · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall to the walkway or working surface

EMPLOYEE LIFTED PACKING GLAND SLEEVE FROM SHELF BACKED AWAY FROM SHELF TRIPPED AND FELL, RESULTING IN A MID BACK STRAIN.

1988 · 1 incident

May 21, 1988 NE · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS ASSEMBLING METAL ENCLOSURE AROUND ELECTRIC COMPONENTS ON DREDGE AS HE WAS CUTTING THE METAL A PIECE OF THE SHEET SNAPPED BACK AND HIT HIM IN THE RT WRIST

1987 · 1 incident

July 24, 1987 NE · Metal/Non-Metal barge/boat/dredge/towbarge/towboat/leach operator, riverman, deck hand MACHINERY
Martin Marietta Aggregates · Struck by flying object

EMPL USING HAND3GRINDER TO SMOOTH WELD SEAM ON DREDGE WATER PUMP WHEN SMALL PIECE OF METAL FLEW UP AND HIT HIM IN THE RIGHT EYE.WEARING HIS SAFETY GLASSES.NO DAMAGE TO EYE.