Mining Incidents

POMONA: 1 recorded fatality Metal/Non-Metal

Greensboro, Guilford County, NC  ·  Active
MSHA Mine ID: 3100052

POMONA has $22K in proposed MSHA penalties and $0 outstanding across 4 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at POMONA.

Fatalities
1
Total incidents
23
Years on record
1985–2024
Latest incident
Jan 2024
Compliance record
MSHA citations since 2000
123
citations
34
significant & substantial
$22,128
proposed penalties
$21,860
paid to date
99% of proposed penalties paid to date, a $268 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
106
inspections on record
1,847
inspection hours
6.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
123 citations across 1,847 inspection hours.
Source: MSHA inspections data, updated weekly.

POMONA has $22K in proposed MSHA penalties and $0 outstanding across 4 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$22K
proposed penalties
$22K
current assessed
$22K
paid to date
$0
outstanding
122 assessments are final orders; 4 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2026-05-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
27.6%
significant & substantial
13.7%
high negligence or reckless
27.4%
reasonably likely or greater
43.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.7% low, 84.6% moderate, 13.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 4% of citations on record
  • Settled 5 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
7%
Penalty reduction in decided contests
$4K proposed, $3K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2013-04-01.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2010-1056M Settlement Bulluck 2011 $3K → $3K
SE 2006-195M Settlement Feldman 2007 $268 → $0
SE 2007-50M Settlement Feldman 2007 $268 → $268
SE 2013-317M Settlement Steele 2013 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-07-29
0%
of limit-tested samples over the exposure limit
44
samples
6
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg28
  • Unlisted Particulate, respirable, <1% Qtz9
  • Quartz, respirable, >1% Qtz7
Show the individual readings (44)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-07-29 Respirable dust, <.1mg 0 Utility Man
2024-07-29 Respirable dust, <.1mg 0 Utility Man
2024-07-29 Unlisted Particulate, respirable, <1% Qtz 0.16 Front-end Loader Operator
2024-07-29 Respirable dust, <.1mg 0 Utility Man
2024-07-29 Respirable dust, <.1mg 0 Crusher Oper/Worker
2023-08-09 Respirable dust, <.1mg 0 Crusher Oper/Worker
2023-08-09 Quartz, respirable, >1% Qtz 0.13 Drill Operator, Rotary
2023-08-09 Quartz, respirable, >1% Qtz 0.13 0.7 0.19 Utility Man
2023-08-09 Unlisted Particulate, respirable, <1% Qtz 0.15 Lab Technician
2023-08-09 Respirable dust, <.1mg 0 Crusher Oper/Worker
2022-07-12 Respirable dust, <.1mg 0 Crusher Oper/Worker
2022-07-12 Respirable dust, <.1mg 0 Utility Man
2022-07-12 Respirable dust, <.1mg 0 Utility Man
2022-07-12 Respirable dust, <.1mg 0 Washer Operator
2022-07-12 Respirable dust, <.1mg 0 Utility Man
2018-11-01 Respirable dust, <.1mg 0 Truck Driver
2018-11-01 Respirable dust, <.1mg 0 Front-end Loader Operator
2018-11-01 Quartz, respirable, >1% Qtz 0.17 0.47 0.36 Welder, etc.
2018-11-01 Respirable dust, <.1mg 0 Utility Man
2018-06-14 Respirable dust, <.1mg 0 Utility Man
2018-06-14 Respirable dust, <.1mg 0 Utility Man
2018-06-14 Respirable dust, <.1mg 0 Mechanic
2017-05-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2017-05-17 Unlisted Particulate, respirable, <1% Qtz 0.14 Utility Man
2017-05-17 Unlisted Particulate, respirable, <1% Qtz 0.2 Drill Operator, Rotary Air
2017-05-17 Respirable dust, <.1mg 0 Crusher Oper/Worker
2017-05-17 Respirable dust, <.1mg 0 Crusher Oper/Worker
2016-06-15 Quartz, respirable, >1% Qtz 0.49 0.76 0.64 Mechanic
2016-06-15 Quartz, respirable, >1% Qtz 0.26 0.72 0.36 Mechanic
2016-06-15 Unlisted Particulate, respirable, <1% Qtz 0.16 Drill Operator, Rotary Air
2014-06-25 Quartz, respirable, >1% Qtz 0.18 1.24 0.15 Truck Driver
2014-06-25 Respirable dust, <.1mg 0 Truck Driver
2014-06-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2014-06-25 Quartz, respirable, >1% Qtz 0.2 0.48 0.42 Utility Man
2009-06-03 Unlisted Particulate, respirable, <1% Qtz 0.22 Front-end Loader Operator
2009-06-03 Respirable dust, <.1mg 0 Truck Driver
2009-06-03 Unlisted Particulate, respirable, <1% Qtz 0.13 Welder, etc.
2009-06-03 Respirable dust, <.1mg 0 Mechanic
2009-06-03 Respirable dust, <.1mg 0 Complete Load-Haul-Dump
2009-06-03 Respirable dust, <.1mg 0 Washer Operator
2003-07-09 Respirable dust, <.1mg 0 Bulldozer Operator
2002-04-24 Unlisted Particulate, respirable, <1% Qtz 10.04 Crusher Oper/Worker
2002-04-24 Respirable dust, <.1mg 0 Mechanic
2002-04-24 Unlisted Particulate, respirable, <1% Qtz 0.2 Utility Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

POMONA recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In North Carolina, metal and nonmetal mining averaged 1.14 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 6.15 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 6.03 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 4.81 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Martin Marietta Aggregates 1950 to 2005
  2. Martin Marietta Materials Inc 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 12
2025 11
2024 15
2023 15
2022 16
2021 18
2020 19
2019 19
2018 24
2017 20
2016 21
2015 19
2014 16
2013 19
2012 19
2011 23
2010 22
2009 29
2008 32
2007 31
2006 30
2005 32
2004 30
2003 30
2002 29
2001 30
2000 31
Source: MSHA quarterly employment and production, updated weekly.

POMONA sits in Guilford County, North Carolina, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Guilford County, North Carolina · Population 542,987
0.0%
Mining share of county employment
$66,027
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 8,518 0 0 0.0
2026 Q1 6,290 0 0 0.0
2025 Q4 5,467 0 0 0.0
2025 Q3 5,051 0 0 0.0
2025 Q2 6,569 1 0 152.2
2025 Q1 5,748 0 0 0.0
2024 Q4 7,547 2 0 265.0
2024 Q3 7,874 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 8,782 1 0 113.9
2024 Q1 8,309 0 0 0.0
2023 Q4 9,167 0 0 0.0
2023 Q3 8,868 0 0 0.0
2023 Q2 9,271 0 0 0.0
2023 Q1 7,593 0 0 0.0
2022 Q4 7,436 1 0 134.5
2022 Q3 8,659 0 0 0.0
2022 Q2 9,468 0 0 0.0
2022 Q1 7,629 0 0 0.0
2021 Q4 9,549 0 0 0.0
2021 Q3 8,057 0 0 0.0
2021 Q2 7,863 0 0 0.0
2021 Q1 6,657 0 0 0.0
2020 Q4 7,882 0 0 0.0
2020 Q3 8,333 0 0 0.0
2020 Q2 7,202 0 0 0.0
2020 Q1 8,037 0 0 0.0
2019 Q4 9,811 0 0 0.0
2019 Q3 10,320 0 0 0.0
2019 Q2 10,602 0 0 0.0
2019 Q1 10,885 0 0 0.0
2018 Q4 10,459 0 0 0.0
2018 Q3 11,624 0 0 0.0
2018 Q2 12,102 0 0 0.0
2018 Q1 10,829 0 0 0.0
2017 Q4 10,302 0 0 0.0
2017 Q3 9,540 0 0 0.0
2017 Q2 12,500 0 0 0.0
2017 Q1 12,723 0 0 0.0
2016 Q4 22,658 0 0 0.0
2016 Q3 15,896 0 0 0.0
2016 Q2 12,122 0 0 0.0
2016 Q1 8,073 0 0 0.0
2015 Q4 11,698 0 0 0.0
2015 Q3 8,979 0 0 0.0
2015 Q2 8,628 0 0 0.0
2015 Q1 8,624 0 0 0.0
2014 Q4 9,234 0 0 0.0
2014 Q3 9,166 0 0 0.0
2014 Q2 8,679 0 0 0.0
2014 Q1 8,360 1 0 119.6
2013 Q4 10,070 0 0 0.0
2013 Q3 9,714 4 1 411.8
2013 Q2 9,133 0 0 0.0
2013 Q1 9,207 4 1 434.5
2012 Q4 10,507 0 0 0.0
2012 Q3 11,734 1 0 85.2
2012 Q2 10,660 0 0 0.0
2012 Q1 6,431 0 0 0.0
2011 Q4 7,196 1 0 139.0
2011 Q3 9,145 0 0 0.0
2011 Q2 11,011 3 1 272.5
2011 Q1 6,509 0 0 0.0
2010 Q4 10,866 3 1 276.1
2010 Q3 11,546 0 0 0.0
2010 Q2 10,825 7 3 646.7
2010 Q1 5,674 0 0 0.0
2009 Q4 11,243 1 0 88.9
2009 Q3 15,079 2 1 132.6
2009 Q2 13,571 5 1 368.4
2009 Q1 9,078 0 0 0.0
2008 Q4 13,755 0 0 0.0
2008 Q3 15,051 1 1 66.4
2008 Q2 18,235 0 0 0.0
2008 Q1 18,577 2 0 107.7
2007 Q4 23,511 0 0 0.0
2007 Q3 22,021 0 0 0.0
2007 Q2 20,646 2 0 96.9
2007 Q1 18,404 0 0 0.0
2006 Q4 21,047 0 0 0.0
2006 Q3 20,822 2 1 96.1
2006 Q2 18,745 0 0 0.0
2006 Q1 19,189 0 0 0.0
2005 Q4 17,856 0 0 0.0
2005 Q3 20,541 2 1 97.4
2005 Q2 20,211 2 2 99.0
2005 Q1 20,098 5 2 248.8
2004 Q4 22,311 0 0 0.0
2004 Q3 16,545 0 0 0.0
2004 Q2 15,087 6 2 397.7
2004 Q1 14,023 0 0 0.0
2003 Q4 13,966 0 0 0.0
2003 Q3 15,579 3 0 192.6
2003 Q2 14,100 0 0 0.0
2003 Q1 12,245 1 0 81.7
2002 Q4 12,760 0 0 0.0
2002 Q3 15,833 1 0 63.2
2002 Q2 18,893 6 1 317.6
2002 Q1 15,849 0 0 0.0
2001 Q4 18,440 0 0 0.0
2001 Q3 18,111 3 1 165.6
2001 Q2 19,489 0 0 0.0
2001 Q1 18,769 6 2 319.7
2000 Q4 20,466 0 0 0.0
2000 Q3 19,745 4 2 202.6
2000 Q2 19,808 0 0 0.0
2000 Q1 19,245 6 2 311.8

Fatalities at this mine

1 recorded
April 15, 1985 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Martin Marietta Aggregates · Caught in, under or between a moving and a stationary object

DRIVER OUT OF CAB DURING LOADING OPERATIONS. FATTALY INJURED.

Reportable incidents

22 on file (excluding fatalities above)

2024 · 1 incident

January 3, 2024 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Martin Marietta Materials Inc · Struck against stationary object

Employee hit air line bracket when man-lift abruptly stopped.

2022 · 1 incident

February 18, 2022 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Martin Marietta Materials Inc · Over-exertion (Not Elsewhere Classified)

Employee partially stepped on a stair edge and rolled EE's ankle.

2019 · 1 incident

March 23, 2019 NC · Metal/Non-Metal clerk, timekeeper, office worker, director of sales HANDLING OF MATERIALS
Martin Marietta Materials Inc · Caught in, under or between a moving and a stationary object

Employee was opening the front gate and caught finger in the locking mechanism of the gate.

2018 · 1 incident

March 29, 2018 NC · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
Martin Marietta Materials Inc · Fall from machine

EE stepped up on the rear work bumper of EE's truck to turn welder off. When EE stepped back down EE missed the step and fell to the ground which was less than 3 feet and landed on left elbow causing it to dislocate.

2017 · 1 incident

July 5, 2017 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Martin Marietta Materials Inc · Caught in, under or between (Not Elsewhere Classified)

An employee was assisting a customer truck by cleaning off material from the tailgate. The employee notice the tailgate was not latched, so ee tried to close it and caught the tip of finger between the tailgate and the bed of the truck.

2011 · 1 incident

June 8, 2011 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Martin Marietta Materials Inc · Unclassified, insufficient data

EE was operating the dozer and about 2:00PM he began to experience chest pains. He called another EE on the radio and he called foreman and the office. An ambulance was called and he was transported to the hospital. MSHA was notified at 2:10. EE was kept overnight for observation and tests and a heart attack was ruled out. No definate diagnosis was given, he RTW w/no problems.

2010 · 1 incident

May 6, 2010 NC · Metal/Non-Metal miner, prospector, nec HANDLING OF MATERIALS
Martin Marietta Materials Inc · Struck by falling object

EE was on the quarry site for demolition of Liebherr R984 front shovel. EE pulled cylinder pin out of the boom and the cylinder fell on his foot.

2008 · 1 incident

June 21, 2008 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Martin Marietta Materials Inc · Struck by rolling or sliding object

EE was assisting 3 other EE's in moving a starter disconnect. The box had 2 power cables attached that had been covered with mud. In attempting to uncover the cable, the starter box slid towards the injured EE, tipping over on him. The starter box struck him in the head, under his hard hat, resulting in 8 stitches. EE RTW the same day with no other problems.

2007 · 2 incidents

December 1, 2007 NC · Metal/Non-Metal drill operator DUST DISEASE OF LUNGS
Martin Marietta Materials Inc · Inhalation of radiations, caustics, toxic and noxious substances

Silicosis claim.

January 20, 2007 NC · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant HANDLING OF MATERIALS
Martin Marietta Materials Inc · Struck by falling object

3 employees were changing out troughing rollers on a belt conveyor. As employee was lowering a roller down to injured employee, the roller slipped out of his hands, striking co-worker on his left foot about 2 inches above the steel toe. He went to the doctor and an x-ray revealed a broken bone in his left foot.

2006 · 1 incident

December 16, 2006 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Martin Marietta Materials Inc · Over-exertion (Not Elsewhere Classified)

MM Establishes that on the morning of 12/16/06, at approx 3:30 am two ee engaged in horseplay which resulted in physical altercaution. There were a total of three ee on the shift. Due to minor conflicts concerning the statement provided by the injured ee, this incident is under investgation.

2004 · 1 incident

September 15, 2004 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck against stationary object

WASHING OUT UNDER SCREEN TOWER IN SECONDARY PLANT. ABOUT 2:30 PM EMPLOYEE SET HOSE DOWN & VALVE OPENED CAUSING HOSE TO FLY AROUND EE & HE HIT HIS HEAD TRYING TO GET AWAY.

2002 · 1 incident

November 9, 2002 NC · Metal/Non-Metal truck driver SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall from machine

THREE EMPLOYEES WERE WORKING ON THE CRUSHER HEAD AND TWO WERE WORKING ON THE BOWL ON THE OTHER SIDE OF THE CRANE. WHEN FINISHED WITH THE HEAD THE THREE EMPLOYEES CAME OVER TO HELP WITH THE FEE D CONE. TWO WORKERS HOOKED THE CRANE CABLE TO THE OLD CONE. AS THEY STARTED DOWN OFF OF THE EQUIPMENT THE CRANE TAUT THE CABLE THE EQUIPMENT SHIFTED AND SLIPPED 6". EE FELL BACKWARDS ABOUT 40

1998 · 1 incident

September 18, 1998 NC · Metal/Non-Metal HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by falling object

EE WAS WALKING 30-B CRANE WITH FRONT WINDOW OVERHEAD. WALK ABOUT 200' AND WINDOW FELL KNOCKING HARD HAT OFF AND CUTTING TOP OF HEAD.

1996 · 1 incident

June 27, 1996 NC · Metal/Non-Metal drill operator MACHINERY
Martin Marietta Aggregates · Caught in, under or between a moving and a stationary object

EE WAS BREAKING STEEL FROM DRILL WHEN HE GOT HIS RING FINGER ON HIS LEFT HAND CAUGHT BETWEEN STEEL & STEEL GRABBER ACAUSING A FRACTURE & LACERATION.

1995 · 1 incident

March 13, 1995 NC · Metal/Non-Metal clerk, timekeeper, office worker, director of sales SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall from ladders

EMPLOYEE WAS ATTEMPTING TO PAINT AN ELEVATED AREA FROM A POORLY PLACED LADDER. THE LADDER ROTATED SIDEWAYS DUMPING THE EMPLOYEE ONTO A CONCRETE FLOOR AND LANDED ON TOP OF HHIM STRIKING HIM IN THE FACE.

1994 · 1 incident

November 1, 1994 NC · Metal/Non-Metal electrician, lineman SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall from machine

EE WAS HELPING PUT METAL IN SCRAP METAL TRAILER. HE WAS IN THE TRAILER UNHOOKING HOISTED LOADS. AS HE UNHOOKED LOAD OF SCRAP THE METAL HE WAS STANDING ON SHIFTED AND EE FELL OUT OF THE TRAILER TO THE GROUND.

1993 · 1 incident

February 18, 1993 NC · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS USING A PRY BAR ONE DESIGNED FOR THE JOB TO TURN A 30' LONG SECTION OF 10" CHANNEL. THE BAR SLIPPED OFF OF THE LIP OF THE CHANNEL AND THE BAR STRUCK EMPLOYEE IN THE FACE.

1989 · 2 incidents

September 7, 1989 NC · Metal/Non-Metal pumper MACHINERY
Martin Marietta Aggregates · Struck against stationary object

CUT MIDDLE AND FOREFINGER ON L HNAD WHILE REPLACING CUTTING EDGE ON LOADER. LACERATION REEQ STITCHES HAND SLIPPED WHILE USING AIR WRENCH.

March 22, 1989 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Martin Marietta Aggregates · Caught in, under or between (Not Elsewhere Classified)

I NAME & I WERE ATTCHING A PTO HOUSING TO A 12V71 ENGINE USING A TRUCK CRANE ON I NAME TRUCK PTO SHIFTED CATCHING MY FINGERS BETWEEN ENGINE BLOCK & PTO HOUSING CUTTING THE SIDE OF THE FINGERS

1987 · 1 incident

February 5, 1987 NC · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall to lower level, (Not Elsewhere Classified)

EMPLOYEE ATTEMP7ING TO CLIMB THE OUTSIDE STEPS,HANGING ON THE HANDRAIL HE LOST HIS FOOTING AND FELL ABOUT 5FT.INTO A HOLE AND AGAINST A CONCRETE WALL.

1986 · 1 incident

December 12, 1986 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver FIRE
Martin Marietta Aggregates · Contact with hot objects or substances

INJ EMP SANDING3NEAR STOVE IN PIT WARMING HOUSE, FELLOW EMP DASHED FUEL OIL INTO THE HOT STOVE. FLAMES ROLLED OUT OF STOVE INTO INJUREDS FACE CATCHING HIS GLOVES ON FIRE. EMP RECEIVED SEVERE BURNS TO FACE A3D BOTH HANDS