Sidwell Materials, Inc. has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Sidwell Materials, Inc..
Fatalities
0
Total incidents
32
Years on record
1983–2010
Latest incident
Feb 2010
Compliance record
MSHA citations since 2000
56
citations
13
significant & substantial
$5,845
proposed penalties
$5,845
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
34
inspections on record
616
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 616 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Sidwell Materials, Inc. has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
56 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2016-11-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
EE was on knees moving parts from the floor to a steel parts bin. As he moved from a left to right position he smashed his right finger against the steel bin and the part he was holding. Which resulted in 4 stitches on his finger.
Employee was going to cut off old hydraulic tank off of frame of old control trailer when the heat got to the tank and a flash fire occurred, when gases heated up inside of the tank and vented. EE had minor 1st degree burn to face & lips. He was wearing the proper PPE and the oil splattered on the glasses.
2005 · 1 incident
October 28, 2005OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
He finished drilling a hole and was backing drill on an even bench, the right track went into a ditch and the drill tipped over. the mast was not centered, which caused more weight to the right side.
HE WORKED 10 1/2 HOURS ON 10-22-03. HE TOOK OFF WORK ON 10-23-03. HE TOOK A PERSONAL DAY ON 10-25-03. I CALLED HIM ON 10-27-03 TO SEE WHY HE WAS NOT WORKING. HE STATED THAT ON 10-23-03 HE COUL D NOT GET OUT OF BED, DUE TO A SORE BACK. HE STATED THAT HE DID NOT KNOW WHAT HAPPENED TO HIS BACK.
2001 · 2 incidents
July 25, 2001OH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorPOWERED HAULAGE
HE STATED THAT THE A-FRAME BELT WAS CURLED UP UNDER THE CHUTE. HE HAD CO-WORKER TURN BELT ON/OFF TO SEE IF IT WOULD UNCURL, WHILE DOING SO, ROCKS START FLYING. HE THREW HIS HANDS UP TO COVER F ACE. HIS GLOVE ON RIGHT HAND HIT BELT CLAMP AND CAUGHT HIS HAND.
January 10, 2001OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
HE WAS TIGHTENING A BOLT WITH A RACHET AND SOCKET. THE SOCKET SLIPPED OFF NUT AND RACHET FELL AND HIT HIM IN FRONT UPPER TOOTH. CHIPPED TOOTH.
1997 · 1 incident
October 23, 1997OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
DRAINING CONTAINTED FUEL IN 35GAL TANK, LIDE OPENED STEPED ON LID CAUSED IT TO SLIDE STRIKING FEET MADE EE LOSE BALANCE FALLING OVER SIDE OF TANK STRIKING CONTAINMENT AREA AND THEN THE GROUN D
1996 · 1 incident
August 20, 1996OH · Metal/Non-Metalwelder (shop)MACHINERY
CUTTING WITH WELDER ON CRUSHER HOPPER CUT OFF METAL PIECEAND BEAM ON WHICH HE WAS STANDING, SLIPPED AND FELL CAUSIGN EMPLOYEE TO FALL 15-20 FEET TO GROUND.
66929NG ON A CONTROL PANEL ON A GENERATOR. PUT COVER PLATE ON TOP OF GENERATOR. AS EMPL WAS WORKING ON PANEL THE COVER PLATE SLIPPED AND HIT EMPL IN THE BACK OF THE NECK.
May 12, 1992OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
WAS STARTING TO3BE RAISED TO TOP OF TIPPLE IN A BUCKET HOIST TRUCK WHEN CABLE BROKE IN HOIST BOOM TILTING BUCKET BACK AND SPILLING EMPLOYEE TO GROUND BRUISING RIGHT SHOULDER AND CUTTING BACK O K OF HEAD ON PI9CE OF METAL ON GROUND.
August 25, 1987OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanPOWERED HAULAGE
WAS STARTING TO3RAISE IN BUCKET HOIST TRUCK TO TOP OF TIPPLE WHEN CABLE BROKE IN HOIST BOOM TILTING BUCKET BACK AND SPILLING EMPLOYEE TO GROUND BRUISING LEFT SHOULDER.
1986 · 2 incidents
October 7, 1986OH · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
WAS CLIMBING DOWN FROM 988 CAT LOADER, CAUGHT HEEL ON LADDER & FELL SPRAINING RIGHT ANKLE.
For insurers, brokers, and safety consultants
The full compliance file on Sidwell Materials, Inc.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.