The employee picked up one end of a small piece of steel dredge pipe located toward the front of their pickup bed and slid it toward the rear of the truck near the tailgate so it could be removed by a forklift. After setting the pipe down near the tailgate, the employee experienced back pain and was determined to have sustained a back strain.
Wann Plant: 41 MSHA citations Metal/Non-Metal
Wann Plant has $10K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Wann Plant.
- Fatalities
- 0
- Total incidents
- 7
- Years on record
- 2015–2026
- Latest incident
- Jan 2026
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.ⓘ
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.Wann Plant has $10K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2024-09-26
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Respirable dust, <.1mg7
- Quartz, respirable, >1% Qtz2
- Arsenic fumes1
- Beryllium fumes1
Show the individual readings (25)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2024-09-26 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2024-09-26 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2024-09-26 | Respirable dust, <.1mg | 0 | Dredge/Barge Operator | ||
| 2024-09-26 | Unlisted Particulate, respirable, <1% Qtz | 0.63 | Mechanic | ||
| 2020-05-27 | Respirable dust, <.1mg | 0 | Washer Operator | ||
| 2020-05-27 | Respirable dust, <.1mg | 0 | Mechanic | ||
| 2018-05-03 | Quartz, respirable, >1% Qtz | 0.5 | Front-end Loader Operator | ||
| 2018-05-03 | Nuisance dust, respirable, <1% Qtz | 0.56 | 10 | 0.06 | Welder, etc. |
| 2018-02-21 | Lead fumes | 0 | 150 | 0.00 | Welder, etc. |
| 2018-02-21 | Magnesium oxide fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2018-02-21 | Molybdenum fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2018-02-21 | Nickel fumes | 0 | 1 | 0.00 | Welder, etc. |
| 2018-02-21 | Vanadium fumes | 0 | 50 | 0.00 | Welder, etc. |
| 2018-02-21 | Zinc oxide fumes | 0 | 5 | 0.00 | Welder, etc. |
| 2018-02-21 | Manganese fumes | 0.05 | 5 | 0.01 | Welder, etc. |
| 2018-02-21 | Arsenic fumes | 0 | 500 | 0.00 | Welder, etc. |
| 2018-02-21 | Beryllium fumes | 0 | 2 | 0.00 | Welder, etc. |
| 2018-02-21 | Cadmium oxide fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2018-02-21 | Chromium, insoluble | 0.01 | 1 | 0.01 | Welder, etc. |
| 2018-02-21 | Cobalt fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2018-02-21 | Copper fumes | 1.85 | 100 | 0.02 | Welder, etc. |
| 2018-02-21 | Iron oxide fumes | 0.68 | 10 | 0.07 | Welder, etc. |
| 2017-06-28 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2015-06-30 | Quartz, respirable, >1% Qtz | 0.35 | 1.73 | 0.20 | Washer Operator |
| 2015-06-30 | Respirable dust, <.1mg | 0 | Dredge/Barge Operator |
Wann Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2017.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.- Western Sand & Gravel Company 2014 to present
| Year | Employees |
|---|---|
| 2026 | 10 |
| 2025 | 8 |
| 2024 | 7 |
| 2023 | 6 |
| 2022 | 7 |
| 2021 | 9 |
| 2020 | 8 |
| 2019 | 8 |
| 2018 | 8 |
| 2017 | 11 |
| 2016 | 8 |
| 2015 | 7 |
| 2014 | 5 |
Wann Plant sits in Saunders County, Nebraska, where the Census mining category is 0.6% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 4,267 | 0 | 0 | 0.0 |
| 2026 Q1 | 5,651 | 1 | 0 | 177.0 |
| 2025 Q4 | 4,780 | 0 | 0 | 0.0 |
| 2025 Q3 | 3,034 | 7 | 0 | 2307.2 |
| 2025 Q2 | 3,940 | 0 | 0 | 0.0 |
| 2025 Q1 | 3,799 | 1 | 0 | 263.2 |
| 2024 Q4 | 4,002 | 0 | 0 | 0.0 |
| 2024 Q3 | 3,641 | 0 | 0 | 0.0 |
Show 40 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 3,434 | 1 | 0 | 291.2 |
| 2024 Q1 | 2,677 | 0 | 0 | 0.0 |
| 2023 Q4 | 2,724 | 0 | 0 | 0.0 |
| 2023 Q3 | 2,765 | 1 | 0 | 361.7 |
| 2023 Q2 | 3,723 | 0 | 0 | 0.0 |
| 2023 Q1 | 2,678 | 0 | 0 | 0.0 |
| 2022 Q4 | 3,518 | 0 | 0 | 0.0 |
| 2022 Q3 | 3,969 | 0 | 0 | 0.0 |
| 2022 Q2 | 4,270 | 0 | 0 | 0.0 |
| 2022 Q1 | 2,978 | 0 | 0 | 0.0 |
| 2021 Q4 | 4,544 | 0 | 0 | 0.0 |
| 2021 Q3 | 4,859 | 0 | 0 | 0.0 |
| 2021 Q2 | 4,499 | 0 | 0 | 0.0 |
| 2021 Q1 | 4,102 | 3 | 1 | 731.4 |
| 2020 Q4 | 3,640 | 0 | 0 | 0.0 |
| 2020 Q3 | 3,804 | 0 | 0 | 0.0 |
| 2020 Q2 | 3,969 | 3 | 0 | 755.9 |
| 2020 Q1 | 3,389 | 0 | 0 | 0.0 |
| 2019 Q4 | 3,658 | 3 | 3 | 820.1 |
| 2019 Q3 | 4,152 | 0 | 0 | 0.0 |
| 2019 Q2 | 4,648 | 3 | 0 | 645.4 |
| 2019 Q1 | 3,720 | 2 | 0 | 537.6 |
| 2018 Q4 | 4,998 | 0 | 0 | 0.0 |
| 2018 Q3 | 4,111 | 0 | 0 | 0.0 |
| 2018 Q2 | 3,978 | 2 | 1 | 502.8 |
| 2018 Q1 | 3,142 | 2 | 0 | 636.5 |
| 2017 Q4 | 3,644 | 0 | 0 | 0.0 |
| 2017 Q3 | 6,033 | 0 | 0 | 0.0 |
| 2017 Q2 | 6,593 | 0 | 0 | 0.0 |
| 2017 Q1 | 6,319 | 1 | 0 | 158.3 |
| 2016 Q4 | 4,238 | 0 | 0 | 0.0 |
| 2016 Q3 | 5,634 | 0 | 0 | 0.0 |
| 2016 Q2 | 3,996 | 0 | 0 | 0.0 |
| 2016 Q1 | 3,314 | 1 | 0 | 301.8 |
| 2015 Q4 | 3,983 | 0 | 0 | 0.0 |
| 2015 Q3 | 5,343 | 0 | 0 | 0.0 |
| 2015 Q2 | 4,602 | 2 | 0 | 434.6 |
| 2015 Q1 | 1,559 | 0 | 0 | 0.0 |
| 2014 Q4 | 2,254 | 0 | 0 | 0.0 |
| 2014 Q3 | 2,322 | 5 | 1 | 2153.3 |
Reportable incidents
7 on file2026 · 1 incident
2023 · 1 incident
The employee was exiting the loader and, while climbing down the loader steps in normal fashion, they felt a pop in their right shoulder.
2022 · 1 incident
The employee was lifting a full box of copy paper from on top of a desk in order to move it to the floor. When they went to set the box of paper down on the floor, they felt a pop in their left shoulder.
2021 · 2 incidents
Employee was using a pocket knife to cut a zip tie from underneath a wheel loader, while performing an oil change, and the knife slipped and cut EE's left index finger.
Employee was working in the shop on lining a chute with polyurethane sheet material. While fitting a piece of the polyurethane into the chute, the employee was using a utility knife to trim one of the edges of sheet when the utility knife slipped and cut the employee's right index finger and part of EE's palm.
2020 · 1 incident
Employee was starting preshift inspection of the plant and tripped over a fire hose that the employee had left on the ground the day before and sprained left ankle.
2015 · 1 incident
Employee with an undisclosed history of back problems began complaining of back pain at the end of his shift on 7/16/15. Employee spent duration of shift loading trucks using a loader under normal conditions. There are no noteworthy factors contributing to this incident except normal loader operation in combination with employee's previously undisclosed history of back problems.