Mining Incidents

AMFIRE Mining Company, LLC: 2 recorded fatalities operator

MSHA operator ID: 0051231

Watch this operator

Email me when a new MSHA incident is filed at any AMFIRE Mining Company, LLC mine.

Fatalities
2
Total incidents
505
Mines on record
18
Years on record
2003–2014
Compliance record
MSHA citations since 2003
3,370
citations
992
significant & substantial
$1,803,449
proposed penalties
$1,085,794
paid to date
60% of proposed penalties paid to date, a $717,655 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2003
1,282
inspections on record
83,995
inspection hours
4.0
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
3,370 citations across 83,995 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1.8M
proposed penalties
$1.1M
current assessed
$1.1M
paid to date
$344
outstanding
3,300 assessments are final orders; 310 contested dockets.
Of $1.5M in penalties contested before the Commission, $631K was upheld in final decisions.
As of the most recent assessment on 2014-12-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
30.0%
significant & substantial
3.1%
high negligence or reckless
29.7%
reasonably likely or greater
21.9%
permanently disabling or fatal if injury occurs
Negligence coding: 1.0% none, 45.1% low, 50.8% moderate, 3.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2014
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.31
total case rate
1.10
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.96 and the all-US-mining average was 2.93 cases per 100 workers.
Year total case rate days-away fatal
2014 3.31 1.10 0.000
2013 4.08 1.19 0.000
2012 3.77 0.49 0.000
2011 4.71 1.62 0.000
2010 5.78 1.75 0.000
2009 3.99 1.47 0.000
2008 5.71 3.24 0.190
2007 6.79 1.44 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2014-12-22, 11 years ago
94%
within 1.5 mg/m3
8,823
samples
10.67
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
4,353 samples taken by MSHA inspectors, 4,470 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR3,153
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)440
  • MOBILE BRIDGE OPERATOR423

Silica (quartz)

Last sampled: 2014-12-24, 11 years ago
5.2
silica avg (%)
680
samples
53.7
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR270
  • BULLDOZER OPERATOR51
  • CLEANING PLANT OPERATOR17

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2014-12-16, 11 years ago
6%
over PEL
1,212
samples
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER220
  • BULLDOZER OPERATOR129
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)109
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
719 citations taken to the federal commission · 21% of citations on record
  • Settled 659 · 92%
  • Stood as issued 59 · 8%
  • Vacated or withdrawn 1 · 0%
71%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 549 decided S&S contests · industry: 79%
54%
Penalty reduction in decided contests
$1.3M proposed, $617K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2015-05-14. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
PENN 2009-31 Settlement Bulluck 2009 $116K → $11K
PENN 2015-0043 Settlement Harner 2016 $69K → $34K
PENN 2008-146 Settlement Bulluck 2009 $62K → $9K
PENN 2009-107 Settlement Lesnick 2010 $61K → $163
PENN 2012-422 Settlement Rae 2013 $52K → $20K
PENN 2012-428 Settlement McCarthy 2013 $52K → $37K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2014
28
2013
33
2012
31
2011
45
2010
44
2009
39
2008
42 (2f)
2007
50
2006
57
2005
65
2004
62
2003
9

Mines on record

Fatalities under this operator

2 recorded
July 11, 2008 PA · Coal bull gang foreman, labor foreman, leadman, section foreman, shift boss Fatality · MACHINERY
AMFIRE Mining Company LLC · Caught in, under or between a moving and a stationary object

From accounts of person involved in accident, EE was preparing to tram Feeder onto belt tail during 3 East belt move when power cable for Feeder was dropped. It appears it fell across tram controls undetected. When EE activated start control switch, Feeder Hydraulic Tram Circuit engaged causing it to tram toward him, striking him & pinning between Feeder & coal rib.

February 25, 2008 PA · Coal rodman, surveyor/transit helper Fatality · POWERED HAULAGE
AMFIRE Mining Company LLC · Struck by powered moving object

EE traveled to get backsight in order to advance survey station in the #5 entry of the 2nd Butt Right off of South Mains section. The backsight was outby a run-thru check curtain. He was struck by a loaded shuttle car as it traveled from the #6 face to the feeder through the run-thru check, and incurred fatal injuries. He was found by the shuttle car operator on his return trip.

For insurers, brokers, and safety consultants

Where AMFIRE Mining Company, LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us