ALLIED STONE PLANT #30: 103 MSHA citations Metal/Non-Metal

Employee alleges was grinding surface to weld studs and the shrapnel bounced off of the wall and went into EE's grinding hood in EE's left eye.

Employee alleges was holding back the middle deck rubber and turned on the hose and it slipped out of employee's hands and hit employee in the mouth breaking front tooth in half.

Employee alleges EE was cutting a piece of steel on a truck frame with a grinder and the wheel slipped from EE's hand and cut EE's left arm. EE received stitches.

Employee alleges EE was coming off of stairs and EE step of on some cement base falling forward unto EE's left knee. Late Reporting due to alleged injury not being documented by employee, and confusion with insurance company compensability because of the lapse time from the original date of injury. Employee started loosing time on 08/09/2016.

EE alleges he didn't remove the snow on the chute and he was climbing up on the chute and he slipped on some ice. He broke a bone in his right ankle.

Employee alleges he was trying to remove the top of the hand cleaner with a utility knife and the knife slipped and cut his left index finger at his knuckle. A medical procedure was done by using glue to glue together his finger.

Employee alleges he was tightening a bolt and the wrench slipped off and his hand struck the conveyor frame at full force fracturing the tip of his left pinky finger - he received 7 stitches.

EMPLOYEE ALLEGES HE WAS WALKING OVER FROZEN MATERIAL AND HE TRIPPED AND TWISTED HIS LEFT ANKLE.

EMPLOYEE ALLEGES HE WAS WALKING ON CATWALK AND HE STEPPED THROUGH THE CONVEYOR AND SLIPPED, HE TRIED TO CATCH HIMSELF BY USING HIS HANDS AND ARMS AS HE FELL TO THE GROUND.

EE ALLEGES HE WAS USING A SLEDGE HAMMER TO KNOCK A RETURN IDLER OVER THE BELT AND THE HAMMER GOT CAUGHT BETWEEN THE BELT AND THE RETURN IDLER PULLING HIS RIGHT ARM INTO THE CONVEYOR.

EE ALLEGES HE WAS PICKING UP CONVEYOR BELT AND HE STEPPED OFF THE END OF THE CATWALK AND FELL ABOUT 3 FEET HURTING HIS NECK, RIGHT ARM, LEG AND CUTTING HIS HEAD RECEIVING STITCHES.

EE ALLEGES HE WAS LIFTING WEAR PLATES WEIGHT ABOUT 70LBS. ON THE DRY PLANT WHEN HE FELT A POP IN HIS BACK.

EE ALLEGES HE WAS JUST FINISHING UP GREASING A 30 GALLON BARREL AND HE FELT SOMETHING PULL IN HIS STOAMCH AREA. (UMBILICAL HERNIA)

EE ALLEGES HE WAS USING A PRYBAR TO CLEAN OFF BUILT UP MATERIAL FROM THE PRIMARY CONVEYOR AND THE PRYBAR SLIPPED SMASHING HIS LEFT MIDDLE FINGER.

EE ALLEGES HE WAS GRINDING PIPE WITH A GRINDER AND HE STARTED HAVING PAIN IN HIS LEFT WRIST.

EE ALLEGES WHILE WALKING TO HIS TRUCK HIS LEGS AND FEET SLIPPED FROM UNDER HIM, THE GROUND WAS COVERED WITH ICE AND HE FELL ON HIS RIGHT ARM AND SHOULDER.

EE ALLEGES HE WAS BENDING OVER SHOOT DIGGING OUT MUD AND HE STARTED FEELING PAIN IN HIS LOWER BACK.

EE ALLEGES HE WAS BEATING ON BIN WITH A PIECE OF METAL TRYING TO UNPLUG THE BIN AND HE FELT PAIN IN HIS RIGHT WRIST.

EE ALLEGES WHILE LOADING HAUL TRKS & OPERATING LOADER THE FLOOR WAS ROUGH & THE MACHINE KEPT TWISTING & TURNING, HE STARTED FEELING PAIN IN HIS BACK

EE ALLEGES HE WAS GRINDING ON SHAKER TO REPAIR A HOLE AND A PIECE OF METAL HIT HIM IN HIS RIGHT EYE.

EMPLOYEE ALLEGES DUE TO OPERATING HEAVY EQUIPMENT REPETIVELY IS THE CAUSE OF HIS LEFT WRIST AND ELBOW AND SHOULDER PAIN.

EE ALLEGES HE WAS CLIMBING INTO BOBCAT & HIS FOOT SLIPPED & HE HIT HIS LEFT SHIN ON THE BOBCAT HE RECEIVE STITCHES

EMPLOYEE ALLEGES HE WAS STANDING ON CATWALK, IT BROKE LOOSE AND HE FELL ABOUT 30' TO THE GROUND.

EE ALLEGES THE BATTERY WAS LOW ON JACKSON WELDING HELMIT AND IT WOULD NOT FUNCTION PROPERLY, WHICH CAUSED HIS EYES TO BURN.

EE ALLEGES HE WAS LIFTING SHOVELING, & PULLING WEAR PLATES INTO POSITION ALL DAY. THAT NIGHT HE STARTED FEELING PAIN IN HIS BACK &GROIN AREA

EE ALLEGES HE WAS CLIMBING DOWN LADDER WITH HIS LUNCH BOX IN HIS HAND AND HE HAD MUD ON HIS FEETAND HE SLIPPED

EMPLOYEE ALLEGES SHE STEPPED OFF SCALE ONTO A ROCK AND SHE LOST HER BALANCE AND PUT HER HANDS DOWN TO CATCH HERSELF.

EMPLOYEE ALLEGES HE WAS REMOVING DRIVE SHAFT BOLTS, THE SOCKET SLIPPED HEAD OF BOLT, HITTING EDGE OF METAL SKID PLATE BELOW WITH FIST, CAUSIN GHIM TO CUT HIS RIGHT RIGHT MIDDLE KNUCKLE.

EMPLOYEE WAS LIFTING TANKS INTO TRUCK AND PULLED SOMETHING IN GROIN AREA.

EMPLOYEE ENTERED HOPPER TO HELP COWORKER CLEAR BRIDGED MATERIAL AND LOST HIS FOOTING ON THE BOULDERS DUE TO MUD AND RAIN AND SLIPPED AND FELL LOOSING HIS HARD HAT AND BUMPED HEAD ON A ROCK REC EIVING 5 STITCHES.

EMPLOYEE WAS STANDING ON SCAFFOLDING SWINGING A 16 LB HAMMER HORIZONTALLY AT WAIST HIGH STRIKING A LARGE PIECE OF STEEL WELDED ONTO NUT WHEN HE MISSED THE STEEL HIS MOMENTUM TOOK HIM AROUND TW ISTING HIS BACK AND PULLING IT OUT OF PLACE.

EMPLOYEE WAS PULLING ON WATER HOSE SO HE COULD CLEAN OUT THE TRACKS ON TRACK HOE.

EE WAS TAKING LOAD BACK DOWN TO PIT. TRUCK WAS IN 3RD GEAR. HE DOWN SHIFTED TO 2ND, APPLIED BRAKES. THEY WENT TO FLOOR. HIT BERM. WHEEL JERKED OUT OF HAND AND KNOB HIT HIS HAND.

EE WAS CLEANING ROCK OUT OF CRUSHER, & LIFTING TO MUCH WEIGHT AT THE WRONG ANGLE.

EE WAS UNLOADING BEATER BARS WHEN BAR STRAPS BROKE AND WOODEN PALLOT BROKE, DROPPING BARS ON GROUND. HE MOVED BARS TO CLEAR UP WOOD AND NAILS, BAR ROLLED OVER CRUSHING FINGER BETWEEN STEEL TO ED BOOTS AND BAR.

EMPLOYEE WAS TRIMMING A PIECE OF 1/2"BELTING, HE CUT PALM OF HAND WITH RAZOR KNIFE.

EMPLOYEE WAS PUSHING BRAKE DRUM & HOUSING ON SPINDLE WHEN TROLLEY BROKE, PULLING EMPLOYEE TO GROUND, HE FELT PAIN IN GROIN AREA.

EMPLOYEE WAS SITTING ON HOOD & PUSHED ON RAIL WITH FEET & THEW HIPS OUT OF PLACE.

EE CUT ONE BOLT LOOSE, WENT TO CUT OTHER BOLT AND HIT BACK END OF TORCH ON CONVEYOR BELT, AND TORCH SLIPPED FROM HAND AND BURNED HIM.

EE WAS FILING HOLE WHEN SAFETY PROP SLID OUT OF FRAME SMASHING HAND.

EMPLOYEE LIFTED UP ON BAR AND TRYING TO PULL. SLIPPED AND FELL OFF BACK HOE AND CAUGHT HIMSELF BEFORE HE HIT THE GROUND. CAUSING HIM TO PULL HIS LOWER RIGHT GROIN. *HE SELECTS TO HAVE SURGE RY IN DECEMBER.*

EE WAS CLEANING ROCK OUT OF CRUSHER, & LIFTING TO MUCH WEIGHT AT THE WRONG ANGLE.

EE WAS CUTTING NYLON HOSE, HAD FAUCET WITH HOSE FACING VERTICALLU ON THE GROUND, THE KNIFE SLIPPED AND CUT EE ON LEFT TOP OF HAND.

TWO EE WERE INSTALLING ADAPTERS AND TIPS ON BUCKET OF THE 475 B LOADER WHEN THE ADAPTER SLIPPED OFF STRIKING TOP OF EE S RIGHT FOOT.

AFTER GRINDING AND DRILLING, EMPLOYEE WASHEED HIS HAND SAND FACE AND MUST HAVE PUSHED OR KNOCKED SOMETHING INTO HSI EYE WHILE WASHING HSI FACE.

INJURED OCCURRED AS A COMBINATION OF PULLING, PRYING, POUNDING, SCRAPING, LIFTING IN A CONFINED SPACE (BETWEEN TOP AND MIDDLE DECK OF A 3 DECK SHAKER SYSTEM. ALL SCREEN RAILS WERE MUDDED UP AN D FROZE AS WERE THE SCREENS.

PLATE WAS LAID ON TRACK OF DRILL TO USE AS AN ANVIL; HAMMER WAS SWUNG DOWNWARD AND IT GLANCED OFF PLATE STRIKING EMPLOYEE'S FINGER. REPORT WAS NOT SENT INTO OUR OFFICE UNTIL OCTOBER 14TH AND W HEN THE DOCTOR'S REPORT CAME INTO THE OFFICE JUST RECENTLY, IT SHOWED THAT A SPLINT WAS PUT ON HIS FINGER. (REASON FOR LATE REPORTING).

EE SLIPPED AND FELL WHILE STEPPING FROM TRUCK TO FUEL STATION PLATFORM AFTER PLACING FUEL HOSE INTO FUEL TANK HE HIT HIS UPPER CHEST ON FUEL HOSE HOOK AND END OF HAND RAILING.

EMPLOYEE WAS WALKING ON CAT WALK TO GO BACK INTO SCALE HOUSE. THE CAT WALK WAS LOOSE AND SHE TWISTED HER BACK AND HIT SHOULDER ON SIDE OF SCALE HOUSE, WHILE TRING TO CATCH HERSELF FROM FALLING . LATE REPORTING IS DUE TO EMPLOYEE DID NOT GO TO DOCTOR AT TIME OF INJURY. THE BILLS CAME IN TODAY STATING SHE RECEIVED CHIROPRACTIC MANIPULATIONS.

A ROCK HIT EE IN THE MOUTH AND CHIPPED OFF A TOOTH.

EMPLOYEE WAS PULLING AND LIFTING ON A METAL PLATE. HE DID NOT LOSOE TIME FROM WORK BUT IT WAS NOTED WHEN SURGEION'S REPORT CAME INTO THE OFFICE TODAY, SEPTEMBER 4, TAHT HE HAS A RIGHT INGUINA

EMPLOYEE WAS PULLING A MIG WELDER ON A CART UP A SMALL 6" INCLINE TO THE EAST SHOP. THE CART GOT STUCK ON CONCRETE SEAM AT TOP OF INCLINE AND HE TRIED TO JERK IT OVER THE SEAM AND FELT A DULL PAIN IN LOWER BACK.

EMPLOYEE RAN HIS FINGER ACROSS HOSE ON CONE THAT HA DOIL COMING OUT OF IT. THE OIL PENETRATED HIS FINGER.

EMPL LIFTING A PIECE OF STEEL OVERHEAD.

EMPLOYEE WAS SHOVELING SNOW OFF SCALE & H IT RUBBER FLAP ON THE SCALE WHICH CAUSED A JOLT CAUSING EMPLOYEE TO TWIST LOWER BACK EMPLOYEE DID NOT SEEK MEDICAL ATT ENTION AT THIS TIME ON JAN 10 1992 WE RECEIVED BILLS FROM THE DOC SHOWING SHE RECEIVED CHIRPORACTIC TREATMENT

EMPLOYEE PULLED SHOULDER MUSCLE WHIEL TRYING TO REMOVE SCREEN FROM TOP DECK EMPLOYEE WAS NOT NOTIFIED OF INJURY UNTIL SEPT. 9, 1991 WHEN HE WENT TO A DOCTOR ON 9-4-91. X-RAYS WERE TAKEN AT THA T TIME BUT ON OCT. 23,1991, HE WENT TO A CHIROPRACTOR.

THE LOADER DOOR CLOSED SHUT ON EMPLOYEEES THUMB WHICH REQUIRED STITCHES TO CLOSE CUT.

EMPL WAS UNDER U FEEDER HE REAISED HEAD & HIT I BEAM . HE DID NOT GO TO DR UNTIL LATER. BILL CAME INTO OFFICE TODAY.

THE HYDRAULIC CLEARING UNIT WAS USED TO RAISE CONE BOWL TO CLEAR ROCK AFTER LIGHTNING SHUT OFF CONE CRUSHER. THE HYDRAULIC UNIT FAILED TO RELEASE THE PRESSURE ON THE RAMS, IN MANUAL BLEADING OF A LINE IT BLEW APART.

EMPLOYEE WAS PULLING THE HOODS BACK ON WASH PLANT WITH ANOTHER EMPLOYEE, THERE WAS A HARD SPOT ON HOOD ROLLER FRAME. WHEN IT BROKE LOSE, HE LOST HIS GRIP AND FELL BACKWARDS AND REACHED OVER A ND CUAGHT HIMSELF ON THE NORTH HOOD.

EMPL WAS PICKING UP BLOCK & HIT BACK ON TRUCK LADDER EMPL DDI NOT LOSE TIME FROM WORK BUT DID RECEIVE MANIPULATION FROM CHIROPRACTOR.

EMPLOYEE WAS PULLING ON A WEDGE AND SLIPPED,HITTING HIS SHOULDER AND KNEE.HE LOST NO TIME BU WAS GIVEN A PRESCRIPTION.

EMPLOYEE WAS HARD FACING ON CAPS IN IMPACTOR AND A PIECE OF HOT WELDING ROD BALL ROLLED DOWN INTO LEFT BOOT.

EMPL HIT HIS HEAD ON THE MIRROR BRACKET WHILE CLIMBIING ON TRUCK

EMPLOYEE WAS REMVOING AN AIR CLEANER WHEN IT SLIPPED THROUGH HIS HAND BECUASE OF GREASE ON IT. THE FINGER WAS ON THE SHARP EDGE OF THE CLEANER AS IT SLIPPED.

THE REAL AXEL HOUSING BROKE ON TRUCK EMPLOYEE HAD LOADED

WHILE EMPLOYEE 4AS WALKING FROM THE SERVICE TRUCK TO REPAIR A HOLE IN A HOSE CARRYING A BUCKET OF TOOLS HE STEPPE ON A LOOSE ROCK AND TWISTED HIS ANKLE CAUSING HIM TO FALL TO THE GROUND

EMPLOYEE TRUNED3OFF AIR COMPRESSOR AND TURNED TO WALK AWAY;AS HE DID,HE STEPPED ON A ROCK AND TWEISTED HIS ANKLE.

EMPLOYEE WAS WO9KING ON 275 MICHIGAN HE LIFTED A PUMP TO HOOK IT UP AND DEVELOPED A HERNIA

EMPL PULLING HY8RAULIC PUMP OUT OF 475 AND PUMP FELL ON HIS HAND.

EE WAS DIGGING 4UD OUT OF TANK BY HAND & CUT HIS HAND ON STEEL BAND WHICK SOMEONE HAD THROWN INTO THE TANK.

EMPL LIFTING AN8 PUSHING UP ROLLER FRAME WHEN IT SLIPPED CUTTING AND BREAKING TIP OF FINGER REQ 6 STITCHES.