Mining Incidents

Amrize McHenry Pit #26: 190 MSHA citations Metal/Non-Metal

Controlled by Amrize Ltd
McHenry, Mchenry County, IL  ·  Active
MSHA Mine ID: 1101167

Amrize McHenry Pit #26 has $27K in proposed MSHA penalties and $0 outstanding across 4 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Amrize McHenry Pit #26.

Fatalities
0
Total incidents
41
Years on record
1986–2020
Latest incident
Apr 2020
Compliance record
MSHA citations since 2000
190
citations
14
significant & substantial
$27,237
proposed penalties
$26,827
paid to date
98% of proposed penalties paid to date, a $410 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
62
inspections on record
1,342
inspection hours
14.2
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
190 citations across 1,342 inspection hours.
Source: MSHA inspections data, updated weekly.

Amrize McHenry Pit #26 has $27K in proposed MSHA penalties and $0 outstanding across 4 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$27K
proposed penalties
$27K
current assessed
$27K
paid to date
$0
outstanding
190 assessments are final orders; 4 contested dockets.
Of $1K in penalties contested before the Commission, $545 was upheld in final decisions.
As of the most recent assessment on 2025-04-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
7.4%
significant & substantial
2.1%
high negligence or reckless
7.4%
reasonably likely or greater
40.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 37.4% low, 60.5% moderate, 2.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
4 citations taken to the federal commission · 2% of citations on record
  • Settled 2 · 50%
  • Stood as issued 2 · 50%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
38%
Penalty reduction in decided contests
$484 proposed, $302 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2008-09-02.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
LAKE 2003-160-M Settlement Lesnick 2003 $531 → $243
LAKE 2008-628M Settlement Barbour 2009 $324 → $202
LAKE 2008-629M Dismissal Barbour 2010 $100 → $100
LAKE 2005-131M Dismissal Lesnick 2005 $60 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-07-17
0%
of limit-tested samples over the exposure limit
15
samples
8
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz7
  • Respirable dust, <.1mg6
  • Nuisance dust, total, <1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (15)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-07-17 Respirable dust, <.1mg 0 Utility Man
2026-07-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-01-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-01-28 Unlisted Particulate, respirable, <1% Qtz 2.1 Building Repair/Maint.
2015-01-28 Quartz, respirable, >1% Qtz 0.76 1.76 0.43 Laborer, Bullgang
2015-01-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-09-17 Quartz, respirable, >1% Qtz 0.13 1.21 0.11 Dry Screen Plant Operator
2013-09-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-09-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2007-05-23 Nuisance dust, total, <1% Qtz 2.15 10 0.22 Utility Man
2007-05-23 Quartz, respirable, >1% Qtz 0.31 1.6 0.19 Utility Man
2007-05-23 Quartz, respirable, >1% Qtz 0.43 1.31 0.33 Utility Man
2003-06-04 Quartz, respirable, >1% Qtz 0.13 0.76 0.17 Crusher Oper/Worker
2003-06-04 Quartz, respirable, >1% Qtz 0.53 0.92 0.58 Washer Operator
2003-06-04 Quartz, respirable, >1% Qtz 1.41 3.1 0.45 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Amrize McHenry Pit #26 recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Illinois, metal and nonmetal mining averaged 1.41 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 5.04 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Mc Henry Sand & Gravel Company Inc 1950 to 1988
  2. Meyer Material Company 1988 to 2022
  3. Amrize Mid-America Inc. 2022 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 15
2025 16
2024 18
2023 17
2022 18
2021 19
2020 17
2019 18
2018 17
2017 19
2016 19
2015 19
2014 15
2013 14
2012 14
2011 13
2010 13
2009 16
2008 16
2007 21
2006 22
2005 22
2004 25
2003 28
2002 37
2001 34
2000 36
Source: MSHA quarterly employment and production, updated weekly.

Amrize McHenry Pit #26 sits in McHenry County, Illinois, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
McHenry County, Illinois · Population 311,366
0.1%
Mining share of county employment
$102,836
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 9,342 0 0 0.0
2026 Q1 5,200 0 0 0.0
2025 Q4 6,452 0 0 0.0
2025 Q3 9,580 0 0 0.0
2025 Q2 9,245 5 0 540.8
2025 Q1 5,262 0 0 0.0
2024 Q4 7,507 5 1 666.0
2024 Q3 10,309 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 7,298 0 0 0.0
2024 Q1 6,781 6 1 884.8
2023 Q4 9,116 0 0 0.0
2023 Q3 9,870 0 0 0.0
2023 Q2 14,107 2 0 141.8
2023 Q1 6,334 3 0 473.6
2022 Q4 9,419 0 0 0.0
2022 Q3 11,320 0 0 0.0
2022 Q2 9,935 8 3 805.2
2022 Q1 6,782 0 0 0.0
2021 Q4 10,687 5 1 467.9
2021 Q3 12,878 3 0 233.0
2021 Q2 12,604 0 0 0.0
2021 Q1 6,569 2 0 304.5
2020 Q4 9,561 0 0 0.0
2020 Q3 12,726 2 0 157.2
2020 Q2 11,054 0 0 0.0
2020 Q1 6,366 2 0 314.2
2019 Q4 10,607 0 0 0.0
2019 Q3 13,282 0 0 0.0
2019 Q2 13,654 5 0 366.2
2019 Q1 7,168 1 0 139.5
2018 Q4 11,249 0 0 0.0
2018 Q3 11,930 2 0 167.6
2018 Q2 13,231 0 0 0.0
2018 Q1 6,283 1 0 159.2
2017 Q4 9,890 0 0 0.0
2017 Q3 12,487 3 1 240.2
2017 Q2 12,262 0 0 0.0
2017 Q1 7,679 4 0 520.9
2016 Q4 8,928 0 0 0.0
2016 Q3 15,393 0 0 0.0
2016 Q2 15,813 6 0 379.4
2016 Q1 10,725 1 0 93.2
2015 Q4 12,938 0 0 0.0
2015 Q3 12,283 0 0 0.0
2015 Q2 9,140 1 0 109.4
2015 Q1 8,206 0 0 0.0
2014 Q4 6,261 0 0 0.0
2014 Q3 12,438 0 0 0.0
2014 Q2 9,143 24 1 2625.0
2014 Q1 5,026 7 0 1392.8
2013 Q4 7,814 0 0 0.0
2013 Q3 9,689 0 0 0.0
2013 Q2 9,053 2 0 220.9
2013 Q1 4,620 4 0 865.8
2012 Q4 6,692 0 0 0.0
2012 Q3 7,441 0 0 0.0
2012 Q2 8,602 7 0 813.8
2012 Q1 4,089 0 0 0.0
2011 Q4 6,713 9 1 1340.7
2011 Q3 5,019 0 0 0.0
2011 Q2 8,135 0 0 0.0
2011 Q1 3,312 0 0 0.0
2010 Q4 3,614 5 0 1383.5
2010 Q3 7,194 8 0 1112.0
2010 Q2 10,085 0 0 0.0
2010 Q1 1,817 0 0 0.0
2009 Q4 6,600 0 0 0.0
2009 Q3 10,584 0 0 0.0
2009 Q2 8,788 2 0 227.6
2009 Q1 3,496 0 0 0.0
2008 Q4 8,356 0 0 0.0
2008 Q3 12,317 0 0 0.0
2008 Q2 9,999 3 2 300.0
2008 Q1 3,799 0 0 0.0
2007 Q4 10,625 5 1 470.6
2007 Q3 13,705 0 0 0.0
2007 Q2 11,422 6 0 525.3
2007 Q1 7,639 0 0 0.0
2006 Q4 11,812 0 0 0.0
2006 Q3 13,982 0 0 0.0
2006 Q2 13,113 0 0 0.0
2006 Q1 6,650 2 0 300.8
2005 Q4 11,550 0 0 0.0
2005 Q3 14,105 0 0 0.0
2005 Q2 13,425 7 0 521.4
2005 Q1 5,627 0 0 0.0
2004 Q4 13,176 0 0 0.0
2004 Q3 16,520 0 0 0.0
2004 Q2 12,137 0 0 0.0
2004 Q1 9,445 2 0 211.8
2003 Q4 14,649 0 0 0.0
2003 Q3 18,405 0 0 0.0
2003 Q2 15,975 7 0 438.2
2003 Q1 9,260 0 0 0.0
2002 Q4 14,936 0 0 0.0
2002 Q3 17,488 0 0 0.0
2002 Q2 14,928 6 0 401.9
2002 Q1 10,235 0 0 0.0
2001 Q4 15,193 0 0 0.0
2001 Q3 15,962 0 0 0.0
2001 Q2 15,209 4 1 263.0
2001 Q1 6,881 0 0 0.0
2000 Q4 12,920 0 0 0.0
2000 Q3 15,268 0 0 0.0
2000 Q2 14,812 0 0 0.0
2000 Q1 11,448 7 1 611.5
No fatalities recorded at this mine.

Reportable incidents

41 on file

2020 · 1 incident

April 25, 2020 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STRIKING OR BUMPING
Meyer Material Company · Struck against stationary object

Employee was walking on catwalk when they bumped into a piece of angle iron injuring a shoulder. Employee delayed in reporting the injury. Medical attention was sought 10 days post incident. Incident was under investigation until 5/19/2020

2017 · 1 incident

June 5, 2017 IL · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Meyer Material Company · Struck by flying object

THE EMPLOYEE WAS REMOVING A WORN TRACK ROLLER ON A CAT D6 DOZER. AFTER DONNING PPE AND REMOVING THE BUSHING BOLTS, EE PLACED THE COLD CHISEL INTO THE LOOSENING SLOT AND STRUCK THE CHISEL WITH THE HAMMER. THE CHISEL SHOT BACK INTO EE'S FACE SHIELD AND LACERATED EE'S LOWER LEFT LIP.

2010 · 1 incident

July 8, 2010 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Over-exertion in lifting objects

Lifting a screen, employee felt pain in right shoulder.

2008 · 3 incidents

August 8, 2008 IL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Meyer Material Company · Struck against a moving object

Employee was driving a haul truck on the travelway when the truck hit a pothole causing the truck to jerk. Employee was holding handhole in cab, felt numbness of finger. Injury reported 8/15 but occurred on 8/8. Medical treatment of dianostic testing performed. Deemed recordable by MD on 9/19 with referral to PT as MRI identified bulged cervical disc. * McHenry West Pit # 26.*

May 10, 2008 IL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Meyer Material Company · Fall onto or against objects

Employee identified that stepping from engine level of haul truck, on identified walk area to truck cab, he slipped on step and fell, striking his right knee on the truck. He admitted to not maintaining three point of contact, as he had his coffee cup in hand. Initial medical attention on 5/19 (not reportable from treatment of first aid)

2006 · 2 incidents

December 6, 2006 IL · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Meyer Material Company · Struck by flying object

Attempting to remove the track pin from the linkbelt backhoe (company # 9127) the employee hit the pin with a sledge. A piece of metal broke loose and struck his left thigh, causing a puncture. Metal was removed and prescription given.

March 31, 2006 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Over-exertion (Not Elsewhere Classified)

EE indicated that while trying to climb conveyor to clean out feed hopper, he knelt down onto left knee and felt pain. EE sought medical attention later and when a MRI found a tear, he reported on 5/16/06. Claim investigated and deemed actually related to work environment on 7/26/06. Surgery is needed at a future date.

2004 · 1 incident

August 31, 2004 IL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Meyer Material Company · Struck by... (Not Elsewhere Classified)

Climbing down off Cat 992, operator of Case uniloader (skidsteer) struck operator in hand while on ladder w/blade extension. Bruises & abrasions only.

2000 · 2 incidents

November 9, 2000 IL · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Meyer Material Company · Over-exertion (Not Elsewhere Classified)

EE WAS LIFTING A DRAIN OIL-PAN, LOST HIS BALANCE & SLIPPED RESULTING IN LOWER BACK PAIN.

October 5, 2000 IL · Metal/Non-Metal miner, nec OTHER
Meyer Material Company · (Not Elsewhere Classified)

EE WAS WALKING OUT OF THE WASH PLANT STAGGERED & FELL DOWN. ANOTHER EE WITNESSED THE EVENT RADIOD THE OFFICE & STARTED CPR

1999 · 1 incident

March 16, 1999 IL · Metal/Non-Metal welder (shop) MACHINERY
Meyer Material Company · Struck by falling object

EMPLOYEE WAS USING A CUTTING TORCH TO CUT A PIECE OF RWO INCH THICK STEEL, WHICH WAS POSITIONED ACROSS TWO SAW HORSES(SUPPORT UNITS). EMPLOYEE DID NOT POSITION HIS FEET PROPERLY AND THE STEEL PLATE FELL ON RIGHT FOOT, FRACTURING HIS BIG TOE

1998 · 2 incidents

June 19, 1998 IL · Metal/Non-Metal ledgeman/hand, quarry man ELECTRICAL
Meyer Material Company · Flash burns (electric)

EE LOCKED OUT THE ELECT. POWER TO A CONTROL BOCX AND STARTED TO DRILL IN THE BOTTOM OF THE BOX. THE DRILL BIT IN THE HOLE SAW BROKE, THE SAW MOVED ACROSS THE BOX TO THE BACK SIDE OF THE BOX, A ND CUT A FEED LINE. EE RECEIVED 1ST DEGREE BURNSON BOTH HANDS AND FACE. EE ALSO RECEIVED A SPECK OF DEBRIS IN HIS RT EYE BALL. WAS USING SAFETY GLASSES.

February 25, 1998 IL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Meyer Material Company · (Not Elsewhere Classified)

EMPLOYEE WAS WELDING ON A STEEL PALTE, HAD HIS HEAD TURNED(RT. SIDE) TO HIS WORK. HIS RT. EAR WAS IN CLOSE PROXIMITY TO THE PLATE. A CO-WORKER HIT THE PLATE WITH A HAMMER. EMPLOYEE WAS SUBJECT ED TO A PERCUSSION AIR BLAST. EMPLOYEE WENT TO OWN DR. 2-28-98 AND RECEIVED A HEARING TEST 3-19-98 TOLD NO HEARING LOSS.

1997 · 1 incident

January 21, 1997 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Meyer Material Company · Struck by flying object

EE WAS USING A HAND GRINDER ON WELDED JOINTS. HE WAS WEARING SAFETY GLASSES. HE WAS GRINDING AT VARIOUS ANGLE & TURNING HIS HEAD TO SEE HIS WORK. A METAL SPECK WENT BEHIND THE SAFETY GLASS SID E SHIEDL, INTO HIS RT. EYE.

1996 · 3 incidents

June 24, 1996 IL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Meyer Material Company · Struck by flying object

EE WAS DRIVING ON A STEEL PIN W/HAMMER, A PIECE OF METAL FLAKE WENT INTO HIS LT EYE. EE WAS WEARING SAFETY GLASSES W/SIDE SHIELD.

June 21, 1996 IL · Metal/Non-Metal mechanic helper MACHINERY
Meyer Material Company · Struck by... (Not Elsewhere Classified)

EE WAS WELDING WITH OTHERS IN SHOP. EE STOPPED WELDING. TILTED HIS HELMENT UP. A SPECK OF COOLING SLAG POPPED AND SPECK WENT INTO HIS LT EYE.

May 30, 1996 IL · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management POWERED HAULAGE
Meyer Material Company · Struck against a moving object

EE WAS OPERATING A FRONT END LOADER AT THE PIT SITE. EE DROVE THROUGH A POT HOLE AND FELT A PAIN IN HIS BACK. THIS WAS ON 5-30-96. EE WAS OFF WORK FROM 6-3-96 TO 6-7-96 RECEIVING CHIROPRACTOR THERAPY.

1995 · 2 incidents

October 30, 1995 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STRIKING OR BUMPING
Meyer Material Company · Struck against stationary object

EE WAS WORKING IN A SURGE PILE TUNNEL, WHEN A ROLL CRUSHER STOPPED. EE STRUCK HIS HEAD ON A STEEL BEAM WHEN HE EXITED THE TUNNEL, HEADED TO THE CRUSHER. HARD HAT FELL OFF--THEN STRUCK HIS HEAD .

January 19, 1995 IL · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Meyer Material Company · Fall from machine

EE PLACED A LADDER AGAINST A MOVEABLE OVERHEAD CRANE. WHEN HE REACHED THE TOP THE CRANE MOVED FROM HIS WEIGHT AGAINST IT. EE FELL AND LANDED ON HIS BACK.

1994 · 4 incidents

November 23, 1994 IL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Meyer Material Company · Struck against stationary object

EMPLOYEE ENTERED CAB OF 1972 CAT D-8 DOZER W/ THE DOOR HALF OPENED. HE STRUCK HIS RIGHT ELBOW ON CORNER OF THE DOOR. HE REPORTED A BRUISED ELBOW TO HIS SUPERVISOR ON 12-6-94. THE ELBOW HAS SWO LLEN UP. WENT TO DR. DR. DRAINED ELBOW. WILL RETURN 12-12-04 TO HAVE FLUID DRAINED 2ND TIME.

November 10, 1994 IL · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Meyer Material Company · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS SHOVELING UNDER A CONVEYOR, WHILE SHOVELING EMPLOYEE WAS TWISTING & TURNING CRAMPED AREA, EMLOYEES BACK GAVE OUT TO. HE FELL TO THE GROUND.

September 13, 1994 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Meyer Material Company · Fall from scaffolds, walkways, platforms

EMPLOYEE WAS WORKING ON TAIL PULLEY OF AN ELEVATED CONVEYOR. WHILE STANDING ON A 2" X 10" WOG PLANK CONSTRUCTED WALKWAY, THE WALKWAY FAILED UNDER LOAD. EMPLOYEE FELL 20' TO A PILE OF 3/8" PEA GRAVEL PILE. EMPLOYEE RECEIVED SPRAINED ANKLES AND TWO CRACKED VERTEBRAE.

August 1, 1994 IL · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Meyer Material Company · Over-exertion (Not Elsewhere Classified)

EE WAS PULLING ON A COIL OF WIRE, WHEN HE FELT ASHARP PAIN IN THE GROIN AREA, HE WAS OK THAT DAY& FORE SOMETIME TO COME. THEN HE HAD PAIN & SWELLING - WENT TO HIS DOCTOR 3 TIMES & NOW HE NEEDS SURGERY.

1993 · 2 incidents

April 21, 1993 IL · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management ELECTRICAL
Meyer Material Company · Struck by flying object

EE NOTICED SMOKE COMMING FROM BATTERY BOX EE THEN OPENED THE BATTERY BOX LID THE BATTERY THEN EXPLODED BLOWING SAND AND DUST IN EE S FACE NO ACIDENT EE WAS TREATED FOR DUST IN EYES AND RELEASE D NO LOST TIME.

March 19, 1993 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Meyer Material Company · Struck by falling object

EMPLOYEE WAS UNDER SHAKER SCREEN DECK-TIGHTING THE DECK SCREEN BOLTS.-RUST FELL INTO HIS RT. EYE.

1992 · 3 incidents

September 17, 1992 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Struck against stationary object

CLEANING AROUND CONVEYOR IN TUNNEL AREA EMPLOYEE STRUCK HIS LT ELBOW AGAINST AN ANGEL IRON ELBOW SWELLED UP EMPLOYEE WENT TO HOSPITAL

July 21, 1992 IL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Meyer Material Company · Fall from machine

EMPLOYEE WAS STANDING ON A "ELEVATOR PADDLE" ON A EARTH MOVING SCRAPER. EMPLOYEE WAS MOVING A CONTROL BOX ATTACHED TO OVERHEAD CRANE TO THE OUTSIDE SIDE OF THE SCRAPER. THE PADDLE SHIFTED, EMP LOYEE LOST HIS BALANCE- FELL TO FLOOR (3')- BROKE HIS LEFT ANKLE.

February 14, 1992 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Struck by falling object

EMPL WORKING ON A SANDSCREW-EMPL PLACED HAND ON AN ANGLE IRON TO SUPPORT BODY WEIGHT.WHILE INSPECTING THE UNDERSIDE OF SANDSCREW SHAFT,HAND DISLODGED RUST FROM ANGLE IRON WHICH FELL DOWN AND BEHIND SAFETY GLASSES.

1991 · 2 incidents

September 19, 1991 IL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Meyer Material Company · Fall onto or against objects

WHILE DISMOUNTING SCRAPER EMPL'S FOOT SLIPPED OFF OF LAST STEP. HE STRUCK RT KNEE AGAINST PROVIDED LADDER.

July 11, 1991 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Meyer Material Company · Fall from machine

EMPL WAS FILLING WATER TRUCK WHILE DECENDING FROM TRUCK RT FOOT SLIPPED OFF CATWALK HE TWISTED LT KNEE WHILE TRYING TO REGAIN BALANCE RESULTING IN TORN LIGAMENTS.

1990 · 5 incidents

September 14, 1990 IL · Metal/Non-Metal mine manager, mine foreman, mine owner OTHER
Meyer Material Company · Absorption of radiations, caustics, toxic and noxious substances

WHILE MOVING ABOUT GENERAL GRAVEL PIT DUTIES, HE WAS STUNG BY A WASP.

May 10, 1990 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Meyer Material Company · Struck against a moving object

MAN DRIVING A PICK-UP TRUCK IN GRAVEL PIT HIT BUMP GAS PEDAL WENT DOWN DROVE TRUCK INTO GRAVEL PILE TO STOP HIT MOUTH ON STEERING WHEEL

April 28, 1990 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Meyer Material Company · Caught in, under or between a moving and a stationary object

WHILE REMOVING BOLTS FROM TRACK ROLLERS ON A TD 25 DOZER, THE AIR WRENCH SPUN HIS HAND INTO THE FLOOR.

February 5, 1990 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Meyer Material Company · Caught in, under or between a moving and a stationary object

WHILE BREAKING FRONT WUMPS WITH A STEEL BAR HE GOT HIS LITTLE FINGER BETWEEN THE BAR AND SUPPORT BRACE.

January 30, 1990 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Absorption of radiations, caustics, toxic and noxious substances

WHILE INSTALLING A SPRAY NOZZLE INTO AEROSOL CAN OF DE GREASER THE DE GREASING CHEMCIAL SPARYED INTO HIS EYES.

1989 · 2 incidents

June 19, 1989 IL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Meyer Material Company · Over-exertion (Not Elsewhere Classified)

INJURED MAN WAS BEING ASSISTED BY THE WITNESS LOADING A 55 GAL DRUM OF OIL ONTO A 2-WHEEL DRUM CART INJURED MAN FELT PAIN IN BACK

May 25, 1989 IL · Metal/Non-Metal tipple/top lander/skip dumper operator, binman, topman ELECTRICAL
Meyer Material Company · Contact with electrical current

ELECTRICAL STORM KNOCKED OUT ELECTRICAL POWER IN GRAVEL PIT. INJURED WENT TO PUMP HOUSE TO INVESTIGATE. HE TOUCHED AN ELECTRICAL SWITCH BOX AND RECEIVED AN ELECTRICAL SHOCK.

1987 · 2 incidents

August 20, 1987 IL · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator ELECTRICAL
Mc Henry Sand & Gravel Company Inc · Flash burns (electric)

REPLACING 200 A4P FUSE ON DISTRIBUTION PANEL. FUSE BOX WAS INPUT TO CRUSHER FROM PRIVATE MAIN TRANSFORMER. SAFETY SWITCH WAS OPEN, BUT MAY HAVE FAILED. FUSE BOX WAS BLOWN APART. VICTIM SUFFERE D 1 ST AND 2 ND3DEGREE BURNS TO FACE, ARM, HAND AND LEGS FROM THE EXPLOSION AND ENSUANT BALL OF FIRE.

August 20, 1987 IL · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator ELECTRICAL
Mc Henry Sand & Gravel Company Inc · Flash burns (electric)

REPLACING 200 A4P FUSE ON DISTRIBUTION PANEL. FUSE BOX WAS INPUT TO CRUSHER FROM PRIVATE MAIN TRANSFORMER. SAFETY SWITCH WAS OPEN, BUT MAY HAVE FAILED. FUSE BOX WAS BLOWN APART. VICTIM SUFFERE D 2 & 3 RD DEGR9E BURNS TO FACE AND HANDS, AND 1 ST AND 2ND DEGREE BURNS TO LEGS FROM THE EXPLOSION AND ENSUANT BALL OF FIRE.

1986 · 1 incident