Galloway Trucking, Inc. has $23K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Galloway Trucking, Inc..
Fatalities
0
Total incidents
19
Years on record
1988–2007
Latest incident
Aug 2007
Compliance record
MSHA citations since 2000
129
citations
29
significant & substantial
$23,294
proposed penalties
$21,535
paid to date
92% of proposed penalties paid to date, a $1,759 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 504 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Galloway Trucking, Inc. has $23K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$23K
proposed penalties
$22K
current assessed
$22K
paid to date
$0
outstanding
128 assessments are final orders; 2 contested dockets.
Of $9K in penalties contested before the Commission, $7K was upheld in final decisions.
As of the most recent assessment on 2025-08-15.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2020-12-01, 5 years ago
0%
of limit-tested samples over the exposure limit
6
samples
3
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz2
Respirable dust, <.1mg2
Aluminum oxide fumes1
Arsenic fumes1
Show the individual readings (20)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2020-12-01
Quartz, respirable, >1% Qtz
0.71
Front-end Loader Operator
2006-09-21
Respirable dust, <.1mg
0
Front-end Loader Operator
2005-02-16
Arsenic fumes
2.08
500
0.00
Welder, etc.
2005-02-16
Beryllium fumes
0
2
0.00
Welder, etc.
2005-02-16
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2005-02-16
Chromium, insoluble
0
1
0.00
Welder, etc.
2005-02-16
Cobalt fumes
0
100
0.00
Welder, etc.
2005-02-16
Copper fumes
9.31
100
0.09
Welder, etc.
2005-02-16
Iron oxide fumes
0.53
10
0.05
Welder, etc.
2005-02-16
Magnesium oxide fumes
0
10
0.00
Welder, etc.
2005-02-16
Manganese fumes
0.06
5
0.01
Welder, etc.
2005-02-16
Molybdenum fumes
0
10
0.00
Welder, etc.
2005-02-16
Nickel fumes
0
1
0.00
Welder, etc.
2005-02-16
Titanium dioxide fumes
0
10
0.00
Welder, etc.
2005-02-16
Vanadium fumes
0
50
0.00
Welder, etc.
2005-02-16
Zinc oxide fumes
0
5
0.00
Welder, etc.
2005-02-16
Lead fumes
0.98
150
0.01
Welder, etc.
2005-02-16
Aluminum oxide fumes
0
10
0.00
Welder, etc.
2001-11-20
Quartz, respirable, >1% Qtz
0.12
0.38
0.32
Crusher Oper/Worker
2001-11-20
Respirable dust, <.1mg
0
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2026
3
2025
4
2024
3
2023
6
2022
6
2021
6
2020
5
2011
2
2010
2
2009
4
2008
5
2007
5
2006
6
2005
6
2004
6
2003
5
2002
5
2001
5
2000
5
Source: MSHA quarterly employment and production, updated weekly.
Galloway Trucking, Inc. sits in Rockingham County, New Hampshire, where the Census mining category is 0.0% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Rockingham County, New Hampshire · Population 317,163
0.0%
Mining share of county employment
$113,927
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2026 Q1
480
0
0
0.0
2025 Q2
480
0
0
0.0
2025 Q1
720
0
0
0.0
2024 Q4
780
0
0
0.0
2024 Q3
480
6
0
12500.0
2024 Q2
200
0
0
0.0
2024 Q1
480
0
0
0.0
2023 Q4
2,400
0
0
0.0
Show 58 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2023 Q3
2,400
8
0
3333.3
2023 Q2
2,400
0
0
0.0
2023 Q1
2,400
0
0
0.0
2022 Q4
2,400
0
0
0.0
2022 Q3
2,400
7
1
2916.7
2022 Q2
2,400
0
0
0.0
2022 Q1
2,400
0
0
0.0
2021 Q4
2,400
0
0
0.0
2021 Q3
2,400
0
0
0.0
2020 Q3
1,660
0
0
0.0
2020 Q2
1,490
0
0
0.0
2020 Q1
840
5
2
5952.4
2011 Q3
520
0
0
0.0
2011 Q2
1,070
0
0
0.0
2011 Q1
1,118
0
0
0.0
2010 Q4
1,084
0
0
0.0
2010 Q3
1,085
0
0
0.0
2010 Q2
983
4
1
4069.2
2010 Q1
1,363
0
0
0.0
2009 Q4
1,603
0
0
0.0
2009 Q3
1,032
1
0
969.0
2009 Q2
1,493
0
0
0.0
2009 Q1
1,392
1
0
718.4
2008 Q4
1,818
0
0
0.0
2008 Q3
2,692
0
0
0.0
2008 Q2
2,891
0
0
0.0
2008 Q1
2,529
2
0
790.8
2007 Q4
2,224
0
0
0.0
2007 Q3
2,746
0
0
0.0
2007 Q2
2,866
0
0
0.0
2007 Q1
2,218
7
0
3156.0
2006 Q4
2,754
0
0
0.0
2006 Q3
2,063
20
9
9694.6
2006 Q2
2,134
0
0
0.0
2006 Q1
2,046
12
1
5865.1
2005 Q4
2,146
0
0
0.0
2005 Q3
2,521
0
0
0.0
2005 Q2
2,201
0
0
0.0
2005 Q1
2,110
2
0
947.9
2004 Q4
2,696
0
0
0.0
2004 Q3
2,865
6
2
2094.2
2004 Q2
2,628
0
0
0.0
2004 Q1
2,471
1
0
404.7
2003 Q4
2,518
8
1
3177.1
2003 Q3
3,405
0
0
0.0
2003 Q2
2,489
0
0
0.0
2003 Q1
2,330
1
0
429.2
2002 Q4
2,381
0
0
0.0
2002 Q3
2,297
0
0
0.0
2002 Q2
2,604
0
0
0.0
2002 Q1
2,307
0
0
0.0
2001 Q4
2,675
6
1
2243.0
2001 Q3
2,721
0
0
0.0
2001 Q2
2,892
0
0
0.0
2001 Q1
2,229
0
0
0.0
2000 Q4
2,158
23
10
10658.0
2000 Q3
2,501
0
0
0.0
2000 Q2
2,728
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
19 on file
2007 · 1 incident
August 13, 2007NH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
HE WAS USING A PRY BAR TO RELEASE A JAM. THE PRY BAR WAS CAUGHT AND SNAPPED BACK CATCHING HIS THUMB. HE HAD 7 STITCHES AND WILL PROBABLY LOOSE THE THUMB NAIL.
2002 · 2 incidents
January 17, 2002NH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
THIS IS TO REPORT PREVIOUS CHANGES IN CONDITIONSOF PREVIOUS NOTIFICATION. HE DEVELOPED AN INFECTION IN HIS FOOT & REQUIRED DAILY DR & HOSPITAL VISITS,PLUS MINOR SURGERY
2000 · 1 incident
December 5, 2000NH · Metal/Non-Metalmine manager, mine foreman, mine ownerHANDLING OF MATERIALS
WAS LIFTING INTO PLACE A PIECE OF EQUIPMENT. IT WAS AT AN AWKWARD ANGLE & HE WRENCHED HIS BACK.
1998 · 2 incidents
November 30, 1998NH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerSTEPPING OR KNEELING ON OBJECT
Galloway Trucking Inc · Caught in, under or between a moving and a stationary object
WAS DISMANTELING PLANT IN ORDER TO POSITION IN NEW CONFIGURATION. THE PIECE SUDDENLY MOVED AND CAUGHT LEFT INDEX FINGER, CUTTING IT OFF AT ABOUT THE SECOND KNUCKLE.
1994 · 1 incident
November 29, 1994NH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanPOWERED HAULAGE
Galloway Trucking Inc · Caught in, under or between a moving and a stationary object
EMPLOYEE HAD LOOSE CLOTHING THAT GOT CAUGHT IN CONVEYOR BELT AND ROLLER.
1988 · 3 incidents
July 1, 1988NH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
WHILE LIFTING A CONVEYOR WITH W. ANME, I. NAME HOOKED THE CABLES WITH THE CONVEYORS I. NAME REMINDED W. NAME TO MAKE SURE THE CABLES WERE HOOKED SECURELY. I. NAME THEN SIGNALED W. NAME TO LEF LIFT THE CONVEYOR. THEN THE CABLES SLIPPED OFF THE CONVEYOR HIS I. NAME IN THE SHOULDERS.
June 29, 1988NH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
I. NAME STATED HE WAS BENDING OVER SHOVELING TO REMOVE ROCKS FROM A TUNNEL HE THEN EXPERIENCED SHARP PAIN IN HIS LOWER BACK. HE FINISHED THAT SHIFT AND WORKED THE NEXT DAY THEN HE HAS BEEN OUT OF WORK SINCE 7-1-88,
EMPLOYEE WAS GE7TING READY TO SWING THE SHOVEL ON THE BACKHOE WHEN THE BACKHOE TIPPED OVER A 3-4 FOOT EMBANKMENT ON ITS SIDE. DUE TO FROST CONDITIONS THE EMPLOYEE DID NOT NOTICE HOW CLOSE HE W AS TO THE EMBAN5MENT.