Mining Incidents

Milroy Aggregate Plant #6: 49 MSHA citations Metal/Non-Metal

Controlled by Daniel R Hawbaker
Milroy, Mifflin County, PA  ·  Abandoned
MSHA Mine ID: 3608560

Milroy Aggregate Plant #6 has $22K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Milroy Aggregate Plant #6.

Fatalities
0
Total incidents
5
Years on record
2000–2011
Latest incident
Jun 2011
Compliance record
MSHA citations since 2001
49
citations
16
significant & substantial
$21,899
proposed penalties
$22,027
paid to date
101% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
40
inspections on record
554
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 554 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Milroy Aggregate Plant #6 has $22K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$22K
proposed penalties
$22K
current assessed
$22K
paid to date
$0
outstanding
49 assessments are final orders; 2 contested dockets.
Of $12K in penalties contested before the Commission, $7K was upheld in final decisions.
As of the most recent assessment on 2018-03-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
32.7%
significant & substantial
40.8%
high negligence or reckless
32.7%
reasonably likely or greater
61.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 18.4% low, 40.8% moderate, 40.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 20% of citations on record
  • Settled 6 · 60%
  • Vacated or withdrawn 4 · 40%
20%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 10 decided S&S contests · industry: 79%
42%
Penalty reduction in decided contests
$12K proposed, $7K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2012-12-07.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
PENN 2010-293M Settlement Harner 2011 $11K → $7K
PENN 2013-93M Settlement Harner 2013 $784 → $392
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-02-28, 9 years ago
0%
of limit-tested samples over the exposure limit
19
samples
16
limit-tested
Most sampled contaminants
  • Nuisance dust, total, <1% Qtz6
  • Nuisance dust, respirable, <1% Qtz4
  • Respirable dust, <.1mg3
  • Arsenic fumes2
Show the individual readings (43)
Date Contaminant Concentration Limit Conc / limit Occupation
2017-02-28 Respirable dust, <.1mg 0 Bulldozer Operator
2017-02-28 Nuisance dust, total, <1% Qtz 0 10 0.00 Front-end Loader Operator
2016-02-24 Zinc oxide fumes 0 5 0.00 Welder, etc.
2016-02-24 Vanadium fumes 0 50 0.00 Welder, etc.
2016-02-24 Lead fumes 0 150 0.00 Welder, etc.
2016-02-24 Iron oxide fumes 0.08 10 0.01 Welder, etc.
2016-02-24 Molybdenum fumes 0 10 0.00 Welder, etc.
2016-02-24 Manganese fumes 0.02 5 0.00 Welder, etc.
2016-02-24 Magnesium oxide fumes 0 10 0.00 Welder, etc.
2016-02-24 Arsenic fumes 0.4 500 0.00 Welder, etc.
2016-02-24 Beryllium fumes 0.01 2 0.01 Welder, etc.
2016-02-24 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2016-02-24 Chromium, insoluble 0 1 0.00 Welder, etc.
2016-02-24 Cobalt fumes 0 100 0.00 Welder, etc.
2016-02-24 Copper fumes 0.17 100 0.00 Welder, etc.
2016-02-24 Nickel fumes 0 1 0.00 Welder, etc.
2010-11-18 Nuisance dust, respirable, <1% Qtz 0.16 10 0.02 Laborer, Bullgang
2010-11-18 Quartz, respirable, >1% Qtz 0.25 2.04 0.12 Laborer, Bullgang
2010-11-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-01-06 Nickel fumes 0 3 0.00 Welder, etc.
2009-01-06 Arsenic fumes 0 1500 0.00 Welder, etc.
2009-01-06 Beryllium fumes 0 6 0.00 Welder, etc.
2009-01-06 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2009-01-06 Chromium, insoluble 0.01 3 0.00 Welder, etc.
2009-01-06 Cobalt fumes 0 300 0.00 Welder, etc.
2009-01-06 Copper fumes 0 300 0.00 Welder, etc.
2009-01-06 Iron oxide fumes 0.36 20 0.02 Welder, etc.
2009-01-06 Lead fumes 3.73 450 0.01 Welder, etc.
2009-01-06 Magnesium oxide fumes 0.03 20 0.00 Welder, etc.
2009-01-06 Manganese fumes 0.1 5 0.02 Welder, etc.
2009-01-06 Molybdenum fumes 0 20 0.00 Welder, etc.
2009-01-06 Vanadium fumes 0 50 0.00 Welder, etc.
2009-01-06 Zinc oxide fumes 0.02 10 0.00 Welder, etc.
2007-06-13 Respirable dust, <.1mg 0 Drill Operator, Rotary
2007-06-13 Nuisance dust, respirable, <1% Qtz 1.12 10 0.11 Utility Man
2005-09-13 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Front-end Loader Operator
2005-09-13 Nuisance dust, respirable, <1% Qtz 0.12 10 0.01 Truck Driver
2005-09-13 Quartz, respirable, >1% Qtz 0.54 2.35 0.23 Front-end Loader Operator
2004-07-22 Nuisance dust, total, <1% Qtz 0.25 10 0.03 Bulldozer Operator
2004-07-22 Nuisance dust, total, <1% Qtz 0.18 10 0.02 Front-end Loader Operator
2004-07-22 Nuisance dust, total, <1% Qtz 0.3 10 0.03 Crusher Oper/Worker
2004-07-22 Nuisance dust, total, <1% Qtz 4.45 10 0.45 Supervisor, Co. Official
2004-07-22 Nuisance dust, total, <1% Qtz 0.68 10 0.07 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Milroy Aggregate Plant #6 recorded 0.00 reportable injury cases per 100 full-time workers in 2008.

Injury rate, 2008
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.15 and the all-US-mining average was 3.61 cases per 100 workers.
In Pennsylvania, metal and nonmetal mining averaged 3.91 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2008 * 0.00 0.00 0.000
2007 * 9.21 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
2001 * 9.24 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Glenn O Hawbaker Inc 1996 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2019 3
2018 3
2017 4
2016 8
2015 8
2014 5
2013 6
2012 6
2011 6
2010 6
2009 7
2008 10
2007 8
2006 8
2005 10
2004 10
2003 8
2002 10
2001 10
2000 8
Source: MSHA quarterly employment and production, updated weekly.

Milroy Aggregate Plant #6 sits in Mifflin County, Pennsylvania, where the Census mining category is 0.4% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Mifflin County, Pennsylvania · Population 46,074
0.4%
Mining share of county employment
$61,415
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2019 Q1 513 0 0 0.0
2018 Q4 680 0 0 0.0
2018 Q3 1,049 0 0 0.0
2018 Q2 1,094 0 0 0.0
2018 Q1 2,219 2 0 901.3
2017 Q4 2,394 0 0 0.0
2017 Q3 2,222 0 0 0.0
2017 Q2 1,951 0 0 0.0
Show 68 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2017 Q1 2,272 0 0 0.0
2016 Q4 3,140 0 0 0.0
2016 Q3 5,456 1 0 183.3
2016 Q2 6,675 0 0 0.0
2016 Q1 4,099 1 1 244.0
2015 Q4 3,757 0 0 0.0
2015 Q3 7,326 3 0 409.5
2015 Q2 5,064 0 0 0.0
2015 Q1 3,561 1 0 280.8
2014 Q4 3,365 0 0 0.0
2014 Q3 3,411 1 0 293.2
2014 Q2 2,617 0 0 0.0
2014 Q1 2,405 1 0 415.8
2013 Q4 2,180 0 0 0.0
2013 Q3 2,917 0 0 0.0
2013 Q2 4,798 0 0 0.0
2013 Q1 2,034 0 0 0.0
2012 Q4 2,167 1 1 461.5
2012 Q3 2,181 1 0 458.5
2012 Q2 3,648 0 0 0.0
2012 Q1 4,123 3 2 727.6
2011 Q4 3,507 0 0 0.0
2011 Q3 3,169 0 0 0.0
2011 Q2 3,577 1 0 279.6
2011 Q1 3,229 0 0 0.0
2010 Q4 3,412 1 0 293.1
2010 Q3 3,590 2 0 557.1
2010 Q1 3,930 0 0 0.0
2009 Q4 3,270 11 4 3363.9
2009 Q3 5,275 7 6 1327.0
2009 Q2 4,897 0 0 0.0
2009 Q1 3,474 0 0 0.0
2008 Q4 4,787 0 0 0.0
2008 Q3 5,941 0 0 0.0
2008 Q2 7,501 0 0 0.0
2008 Q1 9,186 0 0 0.0
2007 Q4 5,599 1 0 178.6
2007 Q3 5,801 0 0 0.0
2007 Q2 7,039 0 0 0.0
2007 Q1 3,278 0 0 0.0
2006 Q4 4,373 2 0 457.4
2006 Q3 4,884 0 0 0.0
2006 Q2 6,246 2 1 320.2
2006 Q1 3,887 0 0 0.0
2005 Q4 8,269 0 0 0.0
2005 Q3 7,650 0 0 0.0
2005 Q2 7,014 0 0 0.0
2005 Q1 5,048 0 0 0.0
2004 Q4 5,173 0 0 0.0
2004 Q3 6,688 0 0 0.0
2004 Q2 6,762 0 0 0.0
2004 Q1 5,408 0 0 0.0
2003 Q4 4,678 0 0 0.0
2003 Q3 4,825 0 0 0.0
2003 Q2 6,432 0 0 0.0
2003 Q1 6,581 1 0 152.0
2002 Q4 6,147 0 0 0.0
2002 Q3 7,181 0 0 0.0
2002 Q2 5,786 0 0 0.0
2002 Q1 5,899 0 0 0.0
2001 Q4 5,161 0 0 0.0
2001 Q3 7,239 0 0 0.0
2001 Q2 5,532 0 0 0.0
2001 Q1 3,705 3 0 809.7
2000 Q4 4,593 0 0 0.0
2000 Q3 4,818 0 0 0.0
2000 Q2 4,946 0 0 0.0
2000 Q1 2,830 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

5 on file

2011 · 2 incidents

June 27, 2011 PA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Glenn O Hawbaker Inc · Over-exertion (Not Elsewhere Classified)

He was rolling a flat tire 11R22.5 up a ramp onto the back of an F350 service truck to take it back to the shop and when he got the tire to the top of the ramp and felt a pop in his back. He reported in the morning that he was having trouble getting moving and came to work late. his supervisor saw him later showing pain when moving and he went to get checked.

May 2, 2011 PA · Metal/Non-Metal outside foreman, leadman HANDTOOLS (NONPOWERED)
Glenn O Hawbaker Inc · Struck by flying object

They where changing the impact bars in our secondary crusher and a piece of metal flew off of the shoe that holds the bar in flying into the EE's leg on his right hip. Fine material will get packed in around the shoes and the EE was hitting the shoe with a 4 pound hammer to knock the fines out when a sliver flew off the side and was imbedded into his leg.

2007 · 1 incident

April 21, 2007 PA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Glenn O Hawbaker Inc · Struck against stationary object

Carrying empty totes in loader down hill for disposal when one fell out of bucket and went under it. He backed up and got out to put it back in. He lifted it up and went to push it in when his hand slid cutting his arm.

2001 · 1 incident

February 9, 2001 PA · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Glenn O Hawbaker Inc · Struck by... (Not Elsewhere Classified)

LIFTING A PIECE OF METAL WITH COME ALONG. HOOK SLIPPED OFF OF METAL. HOOK STRUCK RIGHT RING FINGER, CAUSING A CUT TO RIGHT RING FINGER.

2000 · 1 incident

April 28, 2000 PA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Glenn O Hawbaker Inc · Fall from scaffolds, walkways, platforms

A REMOVABLE PIECE OF CATWALK LEFT UNSECURED WAS STEPPED ON A GIVING WAY & ALLOWING LEG TO SLIP THRU