Pike Industries Inc C628 has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Pike Industries Inc C628.
Fatalities
0
Total incidents
19
Years on record
1986–2008
Latest incident
Jul 2008
Compliance record
MSHA citations since 2000
39
citations
9
significant & substantial
$4,733
proposed penalties
$4,733
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 325 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Pike Industries Inc C628 has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
39 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2017-04-27.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2011-09-28, 14 years ago
0%
of limit-tested samples over the exposure limit
8
samples
2
limit-tested
Most sampled contaminants
Respirable dust, <.1mg4
Quartz, respirable, >1% Qtz2
Unlisted Particulate, respirable, <1% Qtz2
Show the individual readings (8)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2011-09-28
Unlisted Particulate, respirable, <1% Qtz
0.12
Front-end Loader Operator
2007-07-25
Respirable dust, <.1mg
0
Crusher Oper/Worker
2007-07-25
Unlisted Particulate, respirable, <1% Qtz
0.15
Front-end Loader Operator
2007-07-25
Quartz, respirable, >1% Qtz
0.18
1.26
0.14
Front-end Loader Operator
2003-08-27
Respirable dust, <.1mg
0
Front-end Loader Operator
2003-08-27
Respirable dust, <.1mg
0
Truck Driver
2003-08-27
Quartz, respirable, >1% Qtz
0.14
1.16
0.12
Front-end Loader Operator
2003-08-27
Respirable dust, <.1mg
0
Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Pike Industries Inc C628 recorded 17.29 reportable injury cases per 100 full-time workers in 2006.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
17.29
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
In New Hampshire, metal and nonmetal mining averaged 4.24 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2006 *
17.29
0.00
0.000
2005 *
18.09
0.00
0.000
2004 *
0.00
0.00
0.000
2003 *
0.00
0.00
0.000
2001 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2018
0
2017
1
2016
1
2015
1
2014
2
2013
4
2012
4
2011
4
2010
4
2009
3
2008
9
2007
9
2006
11
2005
10
2004
10
2003
8
2002
13
2001
12
2000
11
Source: MSHA quarterly employment and production, updated weekly.
Pike Industries Inc C628 sits in Hillsborough County, New Hampshire, where the Census mining category is 0.0% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hillsborough County, New Hampshire · Population 424,732
0.0%
Mining share of county employment
$100,436
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Employee states he was helping another employee take the bucket off of the skid steer. The pin would not release; the bucket was then raised up so the pin could be hit from the bottom. Employee hit a lever which caused the bucket to fall, striking the employee's shin, ankle and foot.
2007 · 1 incident
December 11, 2007NH · Metal/Non-Metalassistant mine foreman, assistant mine managerSLIP OR FALL OF PERSON
Employee claims he was walking with his employees at the end of their shift back to the employee trailer. He descended a bank from the quarry road to the rail road tracks; approximately a 2.5 foot drop between the two and he lost his footing. The path was covered in snow which was packed down from use.
2006 · 2 incidents
September 26, 2006NH · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorPOWERED HAULAGE
Employee was moving rocks with loader, large rock fell out of bucket and loader ran over it causing the loader to shift and he impacted his head and shoulder against side.
Employee was helping another co-worker move an angle iron when other co-worker dropped his end which caused the iron to drop and come in contact with his foot.Employee states he was wearing steel-toed safety shoes. Did not seek medical attention until 5/15/05.
2000 · 1 incident
June 19, 2000NH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
EMPLOYEE WAS HOOKING A PORTABLE AIR COMPRESSOR TO PICKUP. HE WAS USING A PRYBAR TO LIFT THE FRONT OF THE COMPRESSOR WHEN IT SLIPPED OFF THE BAR AND STRUCK HIM IN THE ANKLE.
1995 · 3 incidents
October 20, 1995NH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSLIP OR FALL OF PERSON
WHILE DESCENDING LADDER FORM TOP PLTFORM TO LOWER PLATFORM AT RIGHT SID EOF JAW CRUSEHR EE SLIPPED OFF LOADER AND FELL 11' TO LOWER PLATFORM HITTING THE HAND RAILING AS HE FELL.
I WAS USING A CRANE TRUCK TO DISMANTLE A CRUSHER FOR WINTER REPAIRS. I LIFTED CRUSHER BOWL OFF FROM CRUSHER AND WAS LOWERING BOWL TO GROUND. AS I WAS SWINGING BOWL OUT, I CAUGHT CONVEYOR IDLER ROLL. THE BOWL BEING ROUND SWUNG IN THEN ABRUPTLY OUT. THE SUDDEN OUTWARD MOTION AND SHIFTING OF WEIGHT OF THE BOWL TIPPED TRUCK SEMI-OVER, SPILLING ME AND MATERIALS ONTO THE GROUND. INJURY O
1986 · 1 incident
August 7, 1986NH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EMPLOYEE WAS DI8CONNECTING GALL FROM CRANE.HE WAS ATTEMPTING TO PULL THE PIN THA THAT DROPS ONE BALL FROM THE CABLE.CABLE SOMEHOW PULLED HIM UPWARD CAUSING HIM TO FALL ON HIS LEFT SIDE.LOCATIO U 3