Mining Incidents

PLANT #1: 137 MSHA citations Metal/Non-Metal

Controlled by Mark Schildberg
Greenfield, Adair County, IA  ·  Active
MSHA Mine ID: 1302090

PLANT #1 has $23K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at PLANT #1.

Fatalities
0
Total incidents
25
Years on record
1988–2021
Latest incident
Jun 2021
Compliance record
MSHA citations since 2000
137
citations
23
significant & substantial
$23,447
proposed penalties
$23,409
paid to date
100% of proposed penalties paid to date, a $38 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
73
inspections on record
1,152
inspection hours
11.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
137 citations across 1,152 inspection hours.
Source: MSHA inspections data, updated weekly.

PLANT #1 has $23K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$23K
proposed penalties
$23K
current assessed
$23K
paid to date
$0
outstanding
137 assessments are final orders; 2 contested dockets.
Of $250 in penalties contested before the Commission, $212 was upheld in final decisions.
As of the most recent assessment on 2026-05-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.8%
significant & substantial
8.0%
high negligence or reckless
16.8%
reasonably likely or greater
72.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 19.0% low, 73.0% moderate, 8.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 1% of citations on record
  • Settled 1 · 50%
  • Stood as issued 1 · 50%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
15%
Penalty reduction in decided contests
$250 proposed, $212 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2014-01-30.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2013-500M Settlement Miller 2013 $150 → $112
CENT 2014-184M Default Lesnick 2015 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-11-25
18%
of limit-tested samples over the exposure limit
49
samples
38
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz366 over
  • Nuisance dust, total, <1% Qtz41 over
  • Respirable dust, <.1mg7
  • Nuisance dust, respirable, <1% Qtz2
Show the individual readings (49)
Date Contaminant Concentration Limit Conc / limit Occupation
2017-03-15 Nuisance dust, total, <1% Qtz 12.71 10 1.27 Crusher Oper/Worker
2006-04-12 Quartz, respirable, >1% Qtz 2.03 1.6 1.27 Crusher Oper/Worker
2006-04-12 Quartz, respirable, >1% Qtz 3.96 1.29 3.07 Truck Driver
2006-04-12 Quartz, respirable, >1% Qtz 2.03 1.82 1.12 Truck Driver
2005-02-09 Quartz, respirable, >1% Qtz 2.03 1.15 1.77 Laborer, Bullgang
2003-03-25 Quartz, respirable, >1% Qtz 1.7 1.58 1.08 Truck Driver
2002-08-14 Quartz, respirable, >1% Qtz 1.79 1.2 1.49 Crusher Oper/Worker
2025-11-25 Quartz, respirable, >1% Qtz 0.18 Cleanup Man
2025-11-25 Nuisance dust, total, <1% Qtz 2.42 10 0.24 Crusher Oper/Worker
2025-11-25 Respirable dust, <.1mg 0 Truck Driver
2024-09-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2024-09-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2021-05-18 Quartz, respirable, >1% Qtz 0.35 Truck Driver
2021-05-18 Quartz, respirable, >1% Qtz 0.24 Cleanup Man
2020-12-10 Quartz, respirable, >1% Qtz 0.36 1.14 0.32 Truck Driver
2020-12-10 Respirable dust, <.1mg 0 Cleanup Man
2019-01-09 Quartz, respirable, >1% Qtz 0.94 1.58 0.59 Crusher Oper/Worker
2019-01-09 Quartz, respirable, >1% Qtz 0.6 Truck Driver
2019-01-09 Respirable dust, <.1mg 0 Truck Driver
2017-04-11 Nuisance dust, total, <1% Qtz 0.62 10 0.06 Crusher Oper/Worker
2017-03-15 Nuisance dust, total, <1% Qtz 4.29 10 0.43 Truck Driver
2013-11-13 Quartz, respirable, >1% Qtz 0.19 1.29 0.15 Truck Driver
2013-11-13 Quartz, respirable, >1% Qtz 0.72 2.47 0.29 Crusher Oper/Worker
2013-11-13 Quartz, respirable, >1% Qtz 0.78 2.47 0.32 Cleanup Man
2010-02-03 Quartz, respirable, >1% Qtz 0.4 1.86 0.22 Truck Driver
2010-02-03 Quartz, respirable, >1% Qtz 0.31 1.15 0.27 Crusher Oper/Worker
2010-02-03 Quartz, respirable, >1% Qtz 0.16 1.28 0.13 Truck Driver
2010-02-03 Quartz, respirable, >1% Qtz 0.32 1.31 0.24 Laborer, Bullgang
2007-09-26 Quartz, respirable, >1% Qtz 0.48 1.81 0.27 Cleanup Man
2007-09-26 Quartz, respirable, >1% Qtz 0.73 0.98 0.74 Truck Driver
2007-09-26 Respirable dust, <.1mg 0 Truck Driver
2007-09-26 Quartz, respirable, >1% Qtz 1.03 1.68 0.61 Truck Driver
2007-03-13 Nuisance dust, respirable, <1% Qtz 0.38 10 0.04 Cleanup Man
2006-04-12 Quartz, respirable, >1% Qtz 0.41 1.71 0.24 Crusher Oper/Worker
2005-02-09 Quartz, respirable, >1% Qtz 1.31 1.4 0.94 Laborer, Bullgang
2005-02-09 Quartz, respirable, >1% Qtz 1.79 1.86 0.96 Drill Operator, Rotary
2005-02-09 Quartz, respirable, >1% Qtz 1.13 1.45 0.78 Crusher Oper/Worker
2004-01-21 Quartz, respirable, >1% Qtz 0.54 1.11 0.49 Backhoe Operator
2004-01-21 Nuisance dust, respirable, <1% Qtz 0.25 10 0.03 Front-end Loader Operator
2004-01-21 Quartz, respirable, >1% Qtz 0.3 1.23 0.24 Crusher Oper/Worker
2004-01-21 Quartz, respirable, >1% Qtz 0.21 0.81 0.26 Laborer, Bullgang
2004-01-21 Quartz, respirable, >1% Qtz 0.51 1.22 0.42 Laborer, Bullgang
2003-03-25 Quartz, respirable, >1% Qtz 0.2 1.24 0.16 Front-end Loader Operator
2003-03-25 Quartz, respirable, >1% Qtz 1.06 1.48 0.72 Crusher Oper/Worker
2003-03-25 Quartz, respirable, >1% Qtz 0.86 1.37 0.63 Laborer, Bullgang
2003-03-25 Quartz, respirable, >1% Qtz 0.75 1.6 0.47 Crusher Oper/Worker
2002-08-14 Quartz, respirable, >1% Qtz 0.34 0.97 0.35 Crusher Oper/Worker
2002-08-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-08-14 Quartz, respirable, >1% Qtz 0.24 0.88 0.27 Truck Driver
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

PLANT #1 recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Iowa, metal and nonmetal mining averaged 1.72 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 6.28 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Schildberg Construction Company Inc 1985 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 13
2025 13
2024 14
2023 14
2022 14
2021 16
2020 15
2019 15
2018 14
2017 14
2016 15
2015 14
2014 16
2013 16
2012 15
2011 15
2010 15
2009 18
2008 15
2007 16
2006 17
2005 15
2004 16
2003 18
2002 13
2001 15
2000 19
Source: MSHA quarterly employment and production, updated weekly.

PLANT #1 sits in Adair County, Iowa, where the Census mining category is 1.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Adair County, Iowa · Population 7,471
1.3%
Mining share of county employment
$66,176
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 7,876 1 0 127.0
2026 Q1 7,825 0 0 0.0
2025 Q4 7,283 1 1 137.3
2025 Q3 9,091 1 0 110.0
2025 Q2 9,348 0 0 0.0
2025 Q1 6,936 0 0 0.0
2024 Q4 8,059 0 0 0.0
2024 Q3 8,845 2 0 226.1
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 8,655 0 0 0.0
2024 Q1 6,758 1 0 148.0
2023 Q4 7,597 0 0 0.0
2023 Q3 8,263 0 0 0.0
2023 Q2 9,486 0 0 0.0
2023 Q1 7,014 0 0 0.0
2022 Q4 6,328 0 0 0.0
2022 Q3 9,622 0 0 0.0
2022 Q2 8,465 1 0 118.1
2022 Q1 6,503 1 0 153.8
2021 Q4 8,097 0 0 0.0
2021 Q3 9,171 0 0 0.0
2021 Q2 8,369 0 0 0.0
2021 Q1 6,235 0 0 0.0
2020 Q4 7,228 0 0 0.0
2020 Q3 8,404 0 0 0.0
2020 Q2 9,358 1 0 106.9
2020 Q1 7,445 2 0 268.6
2019 Q4 8,048 0 0 0.0
2019 Q3 10,494 0 0 0.0
2019 Q2 10,106 0 0 0.0
2019 Q1 6,098 0 0 0.0
2018 Q4 7,708 0 0 0.0
2018 Q3 8,427 0 0 0.0
2018 Q2 8,230 0 0 0.0
2018 Q1 6,544 1 0 152.8
2017 Q4 6,583 0 0 0.0
2017 Q3 7,894 0 0 0.0
2017 Q2 8,266 0 0 0.0
2017 Q1 7,919 2 0 252.6
2016 Q4 8,832 2 1 226.4
2016 Q3 8,800 0 0 0.0
2016 Q2 8,981 0 0 0.0
2016 Q1 7,316 2 0 273.4
2015 Q4 10,415 0 0 0.0
2015 Q3 8,139 0 0 0.0
2015 Q2 8,616 2 1 232.1
2015 Q1 6,035 2 0 331.4
2014 Q4 9,053 0 0 0.0
2014 Q3 10,841 0 0 0.0
2014 Q2 9,982 0 0 0.0
2014 Q1 7,710 1 0 129.7
2013 Q4 9,777 2 0 204.6
2013 Q3 10,675 0 0 0.0
2013 Q2 10,164 0 0 0.0
2013 Q1 8,357 4 0 478.6
2012 Q4 9,364 0 0 0.0
2012 Q3 9,464 0 0 0.0
2012 Q2 9,336 0 0 0.0
2012 Q1 8,769 0 0 0.0
2011 Q4 9,312 0 0 0.0
2011 Q3 10,283 0 0 0.0
2011 Q2 10,832 0 0 0.0
2011 Q1 7,267 8 0 1100.9
2010 Q4 9,048 0 0 0.0
2010 Q3 9,569 0 0 0.0
2010 Q2 8,801 2 1 227.2
2010 Q1 7,023 4 1 569.6
2009 Q4 8,070 0 0 0.0
2009 Q3 10,891 0 0 0.0
2009 Q2 11,576 4 0 345.5
2009 Q1 8,543 4 0 468.2
2008 Q4 7,332 0 0 0.0
2008 Q3 9,909 0 0 0.0
2008 Q2 9,278 0 0 0.0
2008 Q1 8,395 9 0 1072.1
2007 Q4 8,588 0 0 0.0
2007 Q3 9,394 9 1 958.1
2007 Q2 11,127 0 0 0.0
2007 Q1 6,807 4 0 587.6
2006 Q4 7,973 0 0 0.0
2006 Q3 10,253 0 0 0.0
2006 Q2 11,353 4 1 352.3
2006 Q1 9,402 1 1 106.4
2005 Q4 7,396 0 0 0.0
2005 Q3 9,242 0 0 0.0
2005 Q2 9,475 0 0 0.0
2005 Q1 9,111 6 1 658.5
2004 Q4 10,459 0 0 0.0
2004 Q3 9,179 0 0 0.0
2004 Q2 10,519 0 0 0.0
2004 Q1 9,123 2 1 219.2
2003 Q4 9,773 0 0 0.0
2003 Q3 10,301 0 0 0.0
2003 Q2 8,912 0 0 0.0
2003 Q1 6,565 0 0 0.0
2002 Q4 7,848 1 1 127.4
2002 Q3 6,881 0 0 0.0
2002 Q2 7,100 0 0 0.0
2002 Q1 8,264 0 0 0.0
2001 Q4 6,895 0 0 0.0
2001 Q3 7,579 0 0 0.0
2001 Q2 6,994 0 0 0.0
2001 Q1 7,530 0 0 0.0
2000 Q4 7,734 1 0 129.3
2000 Q3 11,782 0 0 0.0
2000 Q2 10,724 0 0 0.0
2000 Q1 8,961 5 1 558.0
No fatalities recorded at this mine.

Reportable incidents

25 on file

2021 · 1 incident

June 29, 2021 IA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Schildberg Construction Company Inc · Caught in, under or between a moving and a stationary object

Employee was moving a shaft, when it slipped from hand. Trying to catch with the other hand and mashed finger on hard surface.

2013 · 2 incidents

November 15, 2013 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Schildberg Construction Company Inc · Caught in, under or between a moving and a stationary object

Miner went against training and stuck head in pinch point between counterweight and frame of excavator while installing counterweight.

August 23, 2013 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Schildberg Construction Company Inc · Struck by falling object

Employee was working in the hopper of the breaker when the skid loader approached with a drag attachment on the front, the attachment dropped off and struck him.

2007 · 2 incidents

December 13, 2007 IA · Metal/Non-Metal inspector POWERED HAULAGE
Schildberg Construction Company Inc · Caught in, under or between a moving and a stationary object

Door slammed shut on hand. Fractured left ring finger. He was loading truck on trailer, truck shifted and door slammed shut.

2004 · 2 incidents

December 28, 2004 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Schildberg Construction Company Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE EXITED VEHICLE & CLOSED DOOR, DOOR DID NOT LATCH SO HE HELD LATCH WITH RT. HAND & SLAMMED THE DOOR WITH HIS LEFT. THE DOOR CLOSED ON RT. 3RD MIDDLE FINGER CUTTING THE TIP REQUIRING STITCHES.

December 28, 2004 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Schildberg Construction Company Inc · Struck by... (Not Elsewhere Classified)

Employee was working an un-plugging the hammermill and was int he process of opening the cover. the cover pivole up on hinges. the cever went over center and struck the employee on the right thight causing extersive and severe bruising.

2002 · 1 incident

2001 · 2 incidents

October 19, 2001 IA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Schildberg Construction Company Inc · Inhalation of radiations, caustics, toxic and noxious substances

APPARENTLY THE EE WAS CLEANING A PAIN SPILL AND REACHED ABOVE HIM TO GET SOME MORE PAPER TOWELS HE KNOCKED OVER A CAN OF DENATURED ALCOHOL. THE CHEMICAL SPILLED ON HIS HEAD AND SHOYELERS. HE W ENT DIRECTLY TO RESTROOM AND WASHED HIS FACE ANDEYES. HE CALLED 911.

September 24, 2001 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON

EE WAS CONDUCTING CONT. & RESISTO TEST ON LEAD OUT BINE. WHILE CLIMBING DOWN HIS LEFT FOOT SLIPPED FROM LADDER RUNG CAUSING HIS ANKLE SPRAIN.

2000 · 1 incident

June 19, 2000 IA · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Schildberg Construction Company Inc · Over-exertion in pulling or pushing objects

EMPLOYEE WAS HELPING TO REMOVE A TIRE FROM HAUL TRUCK AND WHILE PUSHING ON TIRE HIS BACK POPPED.EMPLOYEE RECEIVED MEDICINE FROM DOCTOR.

1999 · 1 incident

January 11, 1999 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Schildberg Construction Company Inc · Struck against stationary object

EE WAS INSTALLING NEW RUBBER FLASHING ON A DISCHARGE BIN. HE WAS PULLING THROUGH THE RUBBER FLASHING WITH A PAIR OF VICE GRIPS. AS HE WAS PULLING, THE VICE GRIPS CAME LOOSE AND HIS RIGHT HAND SLID ALONG THE SIDE OF THE METAL PLATE THAT HOLDS FLASHING IN PLACE. HIS SMALL FINGER WAS CUT WHEN IT CAME IN CONTACT WITH PLATE. (1" LACERATION.)

1998 · 1 incident

November 1, 1998 IA · Metal/Non-Metal inspector SLIP OR FALL OF PERSON

EE WAS COLLECTING A ROCK SAMPLE ON A ROCK BIN. THE BIN IS APPROX. 12 FEET TALL. AS HE WAS DECENDING DOWN THE STEPS HIS PANTS CAUGHT A SCRAPER THAT WAS LEANING. AGAINST THE STEPS. THIS CAUSED H IM TO TRIP AND TUMBLE DOWN THE STEPS. TO THE GROUND BELOW. HIS FALL WAS ABOUT 10 FT. HE WAS TAKEN TO HOSPITAL AND CHECKED OUT. HE WAS NOT INSURED BUT WAS GIVEN PAIN PILLS FOR ANY DISCOMFORT.

1997 · 2 incidents

October 28, 1997 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Schildberg Construction Company Inc · Struck against a moving object

HAUL ROAD WAS QUITE SOFT. INJURED WAS DRIVING TO PIT TO BE LOADED. HE TOOK A WIDER THAN USUAL LINE & SOFT ROAD CAUSED TRUCK TO PULL. HE TRIED TO CORRECT BUT CONTINUED TO PULL. AS HE CONTINUED TO CORRECT ANOTHER TRUCK CAME IN OPPOSITE DIRECTION. WHEN TIRES TOOK HOLD TRUCK WAS SENT INTO PATH OF THE OTHER (LOADED) TRUCK. COLLISION CAUSED EMPLOYEE TO SUFFER CUTS/BUMPS. OTHER DRIVER OK.

August 13, 1997 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Schildberg Construction Company Inc · Over-exertion in lifting objects

EE HAD ROLLED UP 50FT OF 4"WATER HOSE AND WAS PREPARING TO LOAD HOSE IN THE BUCKET OF A ENDLOADER. HE WAS BENDING OVER WHEN HIS BACK WENT OUT OF PLACE. IT WAS DISCOVERED THAT HE WAS NOT USIN G THE PROPER LIFTING TECHNIQUE. HE HAS BEEN TRAINED IN PROPER LIFTING. EE WAS TO USE HIS LEGS AND NOT HIS BACK. A REVIEW OF THE LIFTING TECHNIQUE WILL BE CONDUCTED WHEN HE RETURNS. THE T 50 FT

1996 · 1 incident

May 28, 1996 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Schildberg Construction Company Inc · Over-exertion in lifting objects

EE WAS PREPARING TO CLEAN A 1" ROCK SCREEN ON TGE SECONDARY PLANT. THE WEATHER AND T EMATERIAL WERE BOTH DAMP CREATING BUILD-UP ON THE SCREEN. EE WENT TO BEND OVER AND AS HE DID HIS BACK WEN TOUT. HE WAS BENDIN GOVER TO PICK UP A 1/2" ROD APPROX 5'L. EE HAS HAD SOME BACK TROUBLE IN THE PAST BUT HAS BEEN GETTING ALONG QUITE WELL. THE COMPANY HAS BEEN TRAINING AND THE RESULTS HA

1995 · 1 incident

February 22, 1995 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Schildberg Construction Company Inc · Caught in, under or between a moving and a stationary object

EE WAS ATTEMPTING TO REMOVE A 4 IN ROCK THAT WAS CAUGHT IN A SELF CLEANING TAIL PULLEY ON A HIGH SHAKER. THE ROCK WAS WEDGED BETWEEN THE PULLEY AND CONVEYOR BELT. EE GRABBED THE ROCK, PULLED I ON IT, THE ROCK TWISTED LOOSE AND HIS HAND WAS CAUGHT BETWEEN THE ROCK AND PULLEY. THIS RESULTED IN A LACERATION AND BRUISED FINGER.

1994 · 2 incidents

March 21, 1994 IA · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON

MARK MILLER WAS HELPING UNLOAD A PDM FLATBED TRAILER THAT HAD A LOAD OF IRON ON. MARK WAS STANDING CLOSE TO THE EDGE OF THE TRAILER WHEN HE LOST HIS FOOTING AND FELL TO THE GROUND WITH HIS LE FT HAND BETWEEN HIS RIBS AND THE GROUND. THE FALL WAS APPROXIMATELY 3 1/2 FT. MARK WENT TO THE HOSPITAL AND IT WAS DISCOVERED THAT HE HAD ONLY BRUISED HIS RIBS.

March 17, 1994 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Schildberg Construction Company Inc · Struck by rolling or sliding object

BRIAN WAS TRANSPORTING A FINAL DRIVE CASING ON A 2 WHEEL CART. AS BRIAN LAID THE CART DOWN THE CASING ROLLED OFF AND RESTED AGAINST HIS FOOT. THE FINAL DRIVE CASING WEIGHS APPROX. 500 LBS. BRIAN WAS WEARING STEEL TOED SHOES. BRIAN SUFFERED A BRUISE WITH NO BROKEN BONES.

1993 · 1 incident

March 24, 1993 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Schildberg Construction Company Inc · Over-exertion (Not Elsewhere Classified)

A 40 LB ROCK HAD WEDGED IN THE BREAKER. HE WAS LYING ON HIS SIDE TRYING TO PRY THE ROCK IN A DIFFERENT POSITION. HE WAS BENT OVER PULLING ON A PRY BAR WHEN HIS BACK POPPED. HE WILL BE IN- STRUCTED ALONG WITH THE FOREMAN NOT TO USE THIS PROCEDURE ANY MORE. THEY WILL BE INSTRUCTED TO USE A CHAIN AND LOADER TO EITHER PULL THE ROCK OUT OR TO CHANGE ITS POSITION.

1992 · 4 incidents

June 22, 1992 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Schildberg Construction Company Inc · Over-exertion in lifting objects

THE INJURE DDRIVES A PIT HAUL TRUCK. EVIDENTLY THREE ROCKS FELL OUT OF THE PREVIOUS PIT TRUCK ONTO THE HAUL ROAD. HE STOPPED TO MOVE THEM AND LIFTED TWO OF THE ROCKS. HE BENT OVER TO REMOVE THE THIRD AND POPPED HIS BACK OUT. IT WAS INVESTIGATED AND DETERMINED THAT HE HAD BENT OVER WHILE LIFTING. THE PROPER LIFTING REQUIREMENTS WILL BE REVIEWED WITH HIM BY THE SCHILDBERG CONSTR

May 15, 1992 IA · Metal/Non-Metal drill operator SLIP OR FALL OF PERSON
Schildberg Construction Company Inc · Fall to lower level, (Not Elsewhere Classified)

THE INJURED HAD STARTED DRILLING A 12 FOOT LEDGE OF LIMESTONE AND HAD COMPLETED APPROX 12 HOLES.AT THIS TIME HE WAS IN THE AREA AT THE FACE OF THE LEDGE AROUND 4 FEET FROM THE DROP OFF.NORMALL Y HE WAS USED TO DRILLING A 24 FOOT LEDGE AT ATLANTIC QUARRY IN WHICH HE WOULD STAY BACK 6 FEET FROM THE LEDGE.AS HE STARTED THE HOLE HE WALKED BETWEEN THE DRILL AND THE DROP OFF TO CHECK FOR

April 28, 1992 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Schildberg Construction Company Inc · Struck by... (Not Elsewhere Classified)

THE INJURED JUST FINISHED GREASING THE PLANT. HE FIRED UP ALL THE EQUIPMENT FOR THE CRUSHER PROCEDURE. HE NOTICED THAT THE TUB ON THE SCREENING PLANT WAS NOT TURNING SO INJURED TOOK A 6 FT B AR HOOKED THE FLAT END OF THE BAR ON A BOLT AND TRIED TO HELP THE TUB ROTATE. IN DOING SO THE BAR SLIPPED, HITTING INJURED ON THE SHOULDER. THE ACCIDENT WAS INVESTIGATED BY THE SAFETY DIRECT

1988 · 1 incident

June 2, 1988 IA · Metal/Non-Metal HANDLING OF MATERIALS
Schildberg Construction Company Inc · Caught in, under or between (Not Elsewhere Classified)

THE INJURED PERSON HAD BACKED INTO THE LOADING DOCK AND WAS UNLOADING A ROCK BIN OFF A LOWBOY TRAILOR. HE WAS STEPPING DOWN OFF THE TRAILER AND GRASPED THE BIN FOR BALNCE AND THE RING ON HIS FINGER CAUGHT ON AN ANGLE IRON, CUTTING THE FINGER ON THE LEFT HAND.