Mining Incidents
Abandoned mine inventory

Abandoned mines in Montana

Montana has 22,190 mine and prospect features on USGS topographic maps published 1904–2001, including 4,452 mine openings (shafts, adits and air shafts), across 56 counties. OSMRE's abandoned mine land inventory lists 2,288 problems in the state, 774 of them not yet reclaimed. MSHA's register carries 1,328 Montana mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of Montana, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
22,190
Mine openings
4,452
OSMRE problems unreclaimed
774
MSHA mines marked abandoned
1,328
56 counties with mapped features914 features carry a name12,806 prospect pitsmaps published 1904–2001 2,288 OSMRE problems, 1,514 reclaimed883 problem areas (PADs), 313 with work left 9 MSHA mines abandoned and sealed The state program's own inventory estimate: 8,524 features; ~3,200 sites (IMCC-NAAMLP Hardrock AML Report 2025, Table 5, page 46).
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
Madison County
3,766 1,079 106 121
Silver Bow County
2,397 262 19 43
Jefferson County
1,973 425 133 57
Lewis and Clark County
1,862 240 109 83
Broadwater County
1,418 250 41 58
Beaverhead County
1,378 378 38 48
Carbon County
769 60 114 17
Powell County
741 212 48 44
Granite County
719 321 83 43
Cascade County
708 254 337 49
Deer Lodge County
688 121 7 15
Fergus County
550 28 70 42
Meagher County
440 35 15 15
Park County
396 139 57 29
Judith Basin County
291 77 75 12
Ravalli County
285 37 10 36
Lincoln County
260 88 6 53
Sanders County
224 73 14 77
Mineral County
210 87 26 16
Gallatin County
195 26 22 29
Missoula County
180 29 13 77
Flathead County
180 32 4 81
Big Horn County
171 3 168 16
Valley County
171 1 1 9
Phillips County
154 48 0 14
Roosevelt County
139 5 59 9
Richland County
120 13 118 12
Teton County
117 1 0 2
Rosebud County
114 2 27 6
Pondera County
101 1 11 7
Hill County
99 13 25 12
Toole County
98 2 2 8
Chouteau County
91 13 14 6
Yellowstone County
89 1 52 36
Blaine County
89 15 39 5
Glacier County
87 4 0 3
Lake County
70 2 1 21
Musselshell County
68 17 119 17
Powder River County
67 6 14 4
Custer County
63 1 61 6
Sheridan County
62 11 84 7
Sweet Grass County
61 12 7 9
Stillwater County
57 9 7 14
Dawson County
55 1 33 11
Carter County
53 0 0 5
Prairie County
43 0 3 0
Wibaux County
41 0 25 0
McCone County
41 7 3 0
Daniels County
39 3 26 1
Golden Valley County
37 4 16 14
Treasure County
37 0 7 2
Fallon County
35 0 0 9
Wheatland County
29 0 1 12
Liberty County
29 4 1 6
Petroleum County
24 0 0 0
Garfield County
9 0 17 0
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    5,046 20.6%
  2. Prospect pits and trenches
    shallow exploration diggings that never became a mine
    12,806 52.3%
  3. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    875 3.6%
  4. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    3,659 14.9%
  5. Dumps, tailings, spoil and gob
    what mining left above ground
    859 3.5%
  6. Mills, tipples and facilities
    processing plants and hazardous structures
    242 1.0%
  7. Other reclamation problems
    highwalls, subsidence, polluted or clogged water, fires, slides and gases in OSMRE's inventory
    989 4.0%
  8. Other
    symbols outside the classes above
    2 0.0%
By source vocabularythe publishers' own terms
Feature type Features
Prospect Pit 12,806
Adit 3,068
Gravel Pit 2,264
Mine Shaft 1,380
Gravel Pit 1,010
Open Pit Mine 445
P2 Portals 373
P2 Subsidence 238
P2 Hazardous Equip & Facilities 234
P3 Spoil Area 189
P2 Dangerous Piles & Embankments 187
P2 Vertical Openings 170
Tailings - Undifferentiated 165
Mine Dump 147
Gravel/Borrow Pit - Undifferentiated 133
P2 Industrial/Residential Waste 128
P2 Clogged Streams 118
P2 Clogged Stream Lands 103
Quarry 99
Open Pit Mine 91
P1 Subsidence 83
P3 Gobs 77
Disturbed Surface 76
Open Pit Mine or Quarry 74
Placer Mine 41
Quarry 40
Tailings - Pond 40
Strip Mine 38
Coal Mine 37
Clay Pit 34
Disturbed Surface - Pit 30
P2 Dangerous Highwalls 29
P1 Vertical Openings 28
P3 Pits 27
Tailings - Dredge 26
P3 Equipment Facility 24
P1 Portals 23
P3 High Wall 23
Placer Mine 22
P3 Mine Opening 21
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.