Miner was inside Stedman crusher preparing to weld on reel. As they stood up, they placed a foot on the reel, dislodging wedge and rotating reel upward catching their leg and pushing it up against the apron.
A contractor without a contractor ID installing arc flash labels at the mine walked down a slight incline off a small cement pad, lost EE's balance and broke EE's right leg.
Employees were trying to remove a crusher breaker plate by welding a lifting eye on the plate and attaching a come-a-long to pull it out. They put tension on the lifting eye and after a few minutes the eye released from the plate and struck one of the employees on the left cheek.
While closing the right side window of 988G loader, finger was pinched in the closing mechanism causing laceration to the left hand pinky finger. This injury is reportable because the miner received stitches.
Slipped on ice and fractured left fibula
The operator was removing a piece of steel that was plugging a chute. After retrieving it right foot slipped causing left knee to buckle.
Employee claims hit head on a chute while pulling a hose across the floor. This claim was disputed by the employer. Ohio BWC recently ruled this injury was work related. Notification was received by employer on July 15.
Employee was using a shovel to clean the tunnel when he felt pain in his groin area.
The employee was walking along the catwalk along C-7 conveyor when the last section of Gripstrut catwalk slipped out from under his feet causing him to fall about 9 feet to the ground. The section of catwalk was not bolted down.
Employee was driving a pin out of a conveyor when he struck his left thumb with the hammer. Injury was a fracture of the left thumb.
Employee was cleaning a screen rail when a piece of steel flaked off and imbedded itself in his hand.
Employee was drilling a 1/2 inch hole in a conveyor frame. The drill ""caught"" as it exited the steel and the torque from the drill twisted his right hand. Injury is fractures of F-3 & F-4.
Employee was struck by a piece of bearing housing after striking it with a hammer. Injury was a cut lip and chipped tooth.
Employee felt pain in lower abdomen after lifting a screen panel. Result was strain of the lower abdomen.
Employee was greasing a tail-pulley of a conveyor. While in a squatting position, he twisted and felt a pain in his left knee.
Pinched his thumb between two wear-plates while repairing chutes. The employee did not seek medical attention until July 8, 2008 after pain developed where the thumbnail is growing.
Employee was cutting a piece of HDPE with a circular saw. He reached under the HDPE to see how close to the sawhorse he was with the saw and his finger came in contact with the rotating saw blade.
Stepping over rocks when he tripped and fell.
Employee was descending a ladder from the welder platform when the heel of his shoe caught, causing him to fall about 3 feet.
Employee was dismounting a front-end loader and twisted his knee. This accident is reportable due to lost work days begnning 9/16/05.
Walking on uneven ground, employee slipped and fell, injuring his back.
Employee is unsure of his activity that resulted in a hernia.This incident was reported to Management on 8/1/05. Surgery is scheduled for 8/19/05.
Employee was changing hammer on drill. The hammer started to fall and he tried to catch it, pinching his finger between the hammer and drill frame.
Employee was removing derailers from storage shelf when he struck his upper arm on shelf, resulting in a strain of the upper arm. This accident became reportable on 7/12/05, when lost time occurred.
CUTTING STEEL WITH TORCH. BLOW BACK SHOWERED FACE WITH SLAG AND A PIECE GOT INTO HIS EYE.
Stepped up on to the counterweight bracket. His foot slipped off and he caught himself with his left arm causing a muscle strain.
WAS CRAWLING OUT FROM UNDER TRUCK WHEN HE FELT A ""POP"" & SHARP PAIN IN HIS RT. FOOT.
RECEIVED ""FLASH BURN"" OF BOTH EYES WHILE WELDING WITH ANOTHER EMPLOYEE.
STRAINED MUSCLE IN ARM WHILE SHOVELING. DID NOT SEEK MEDICAL TREATMENT UNTIL 6/17/03.
GETTING OUT OF TRUCK AND FOOT SLIPPED ON ROCK, TWISTING HIS KNEE.
SETTING UP THE AUTOMATIC WELDER & PULLED MUSCLE IN BACK. LOST TIME BEGAN 5/29/02. NOT REPORTABLE BEFORE THIS DATE.
WALKING FROM TRUCK TO SHOP, TRIPPED ON ROCK AND CAUGHT HIMSELF W3ITH HIS RIGHT HAND.
WALKING ON SCREEN LOST FOOTING AND FELL BACKWARDS INJURING LEFT WRIST.
JUMPED FROM CONVEYOR FRAME TO CATWALK & TWISTED ANKLE.
FELT PAIN IN SHOULDER WHILE SHOVELING.
CARRYING SHOVEL FULL OF STONE, HIT CONVEYOR TRIP CORD SWITCH, JERKED ARM & SHOULDER.
PINCHED FINGER BETWEEN WEAR PLATE AND BIN WALL WHILE WORKING ON BIN.
DROPPED A ROCK ON FINGER WHILE CLEANING OUT THE CRUSHER.
REMOVING FEEDER GATE FROM C-37 TUNNEL AND STRUCK LEG ON CONVEYER FRAME.
LIFTING 5 GALLON BUCKET OF STONE WHEN FELT PAIN IN BACK.
PUSHING FENDER ON WITH 4X4 AND BOBCAT LOADER, 4X4 ROLLED OVER, CATCHING RIGHT THUMB, REMOVING NAIL FROM THUMB.