Amrize Marblehead Aggregates Metal/Non-Metal

Cut left hand while breaking down boxes

EE was prying on a mechanical lacing clip. EE lost grip of bar, the bar then bounced off of the belt coming towards EE and hit EE in the mouth resulting in a chipped left central incisor.

Employee was trimming the skirt board on C-06 with the grinder and lost control of the grinder resulting in a cut to hand.

EMPLOYEE WAS STEPPING DOWN OFF THE BUMPER OF THE MAINTENANCE TRUCK ON TO LEVEL GROUND AND SPRAINED RIGHT ANKLE.

The employee was moving an 8'x19'x1/2" sheet of steel assisted by a telehandler. The employee tried to slide the sheet of the forks in a pulling motion then felt a pop in the left bicep.

Miner was installing an impact roller on C-12, Miner was applying force to the roller with right hand and bracing self with left hand. When Miner released right hand the roller came in contact with the Miner's left hand causing a break to thumb and hand to become bruised. The Miner was wearing all required PPE including gloves per Company Policy.

Loader operator was closing the door of the cab after entering the machine and closed EE's thumb in the door.

While installing a cheek plate on CR4 employee stepped into an opening on the platform which material is washed into. Employee reported lower back pain.

Employee lifted box from desk top moved to short file cabinet surface of the same level, twisting in the process. Pulled muscle in back, limited lifting for 5 days then released to regular work.

Employee was changing an alternator belt on a surface haulage truck. He was releasing the tension a spring tensioner with a pry bar. In the process he lost control of the pry bar causing the pry bar to strike his left index finger between the pry bar and the frame causing a laceration and minor fracture

Employee was cutting old conveyor with torch, as he cut a piece of angle the angle had unseen stored energy causing it to strike the employee's right hand causing a cut and swelling in the knuckle.

A foreign object entered employee's right eye

He was removing access panels to remove a turbo charger from a wheel loader and heard and felt a pop in his arm. He reported the incident to his manager immediately. He and his manager continued to monitor his condition until 02/12/14 when he informed his manager that the pain had not improved and he wanted to seek medical treatment.

Employee exited equipment improperly, not maintaining three point contact. Upon exiting employee twisted ankle. Employee was diagnosed with a distal fibular fracture and a torn tendon.

An employee tripped over a piece of cut railroad track that is used as weight in a counterweight box. When the employee tripped, he fell forward and tried to catch himself on a 10" pipe. When he reached for the pipe, he hyper-extended his right shoulder and felt a "pop".

Employee began exiting a chute after inspection when his hand slipped and he fell backwards against the side of chute, striking his back against one of the steps. The employee did not report the injury until 06/18/2011, the employee got out of bed, stretched, and felt an extreme amount of pain. Employee sought treatment and was diagnosed with a fractured rib.

Employee reported that while cutting rubber for a screen deck, the knife slipped and lacerated his right inner thigh. Employee went to the hospital where he received 7 sutures, was given a Tetanus shot, and was not given any written prescriptions or restrictions. Employee is to return in 10 days for suture removal.

Employee alleges that he struck his knee while moving around in the cab of a piece of equipment. The employee failed to report the injury until 11/14/2010 and then sought treatment with his personal doctor on 11/29/2010 where he was diagnosed with a torn meniscus, received a Cortisone shot, and was prescribed two (2) days off from work.

At the wet mill doing a belt splice on conveyor 33, repetitively climbing on and off the belt during the repair and twisted his right knee.

Replacing a return roller on C-45 conveyor. Attempting to put the return roller into its holder. Bending & stretching while lifting caused pain in lower back. **Medical with restrictions.**

Stepping down ladder of T-8 haul truck, bolt broke holding a rung on, EE held on with his left hand but fell down a couple of rungs to radiator shroud.

While pulling a conveyor belt (c-45) down with a come-along, the come-along released by itself, this allowed the belt & roller to push EE's hand upward, traping it between the roller & bracket.

Step down from piece of equipment (manlift), proper PPE employed, twisted right foot/ankle when stepping onto Wet Mill Screen catwalk. No lost time - light duty assigned - prescription given.

While driving a 775 haul truck, Employee says he messed his lower back up due to rough roads at south bench near primary crusher. *Restrictions*

Employee lifted railroad ties, then lifting iron bar to place under ties, felt pain in R. elbow. Use of sling & no lifting @ elbow 7 days.

WHILE GETTING OUT OF CRANE, EE SLIPPED ON CRANE DECKING AND GRABBED CRANE HANDRAIL TO PREVENT FALLING, PULLING HIS RIGHT SHOULDER. RESTRICTED DUTIES.

EMPLOYEE WAS CUTTING AWAY OLD METAL & WHEN HITTING IT WITH A HAMMER, MATERIAL GOT INTO HIS RIGHT EYE.

Swinging 3 lb. hammer replacing U-Bolt on Wet Mill Screens Spray Bars. Right wrist is hurting, sharp pain. Went to Hospital (ER) - 3 days of light duty. No lost time.

EMPLOYEE WAS CUTTING TAPE OFF OF A 5/0 CORD ROLL & CUT HIS LEFT HAND WITH A UTILITY KNIFE.

In #1 dry mill electrical room, ee was testing voltage in main breaker for transformer that feeds the substation. when using voltage meter, electrical flash caught ee on left hand. he was transported to hospital er by fire dept. rescue squad. some skin removal and perscrip given.

AT THE PRIMARY CRUSHER, EE SMASHED & CUT SMALLEST FINGER ON HIS RT. HAND MOVING A ROCK.

WORKING AROUND CRUSHER #3 AT DRY MILL. A PIECE OF DIRT BLEW OFF THE CRUSHER WHILE OPENING IT AND WENT IN HIS LEFT EYE. (FOREIGN BODY REMOVAL - SOME RESTRICTIONS).

WHILE WASHING OUT HEAD END OF C-19 WITH HOSE, EE SLIPPED AND FELL HURTING LEFT WRIST & LEFT UPPER RIB CAGE.

EE WENT TO WASH OUT C46 TAILPULLEY. EE ENTERED THE AREA WITHOUT DOING A PROPER SAFETY INSPECTIONBEFORE ENTERING THE AREA. WHILE WASHING THE TAILPULLEY, EE WAS NOT PAYING ATTTENTION TO THE AREA HE WAS IN AND FELL INTO A HOLE IN CATWALK WHERE A BOARD WAS MISSING.

SLID DOWN THE FRAME OF C-19 BELT & STRUCK KNEE ON CHANNEL IRON. NO KNEELING - 4 WEEKS RECIEVED RESTRICTIONS FROM DOCTOR ON 8-22-03

WHILE MOVING A 55 GAL DRUM, PULLED BACK ON DRUM & PINCHED PINKY FINGER ON LEFT HAND. **SPLINT REQUIRED**

EMPLOYEE WAS ATTEMPTING TO MOVE A WEAR PLATE IN SHUTE OF WEST WETMILL SCREEN. THE PINCH BAR HE WAS USING SLIPPED OUT TWISTING HIS RIGHT ARM. HE WAS TAKEN TO E.R. SLING FOR IMMOBILIZATION WAS USED.

WHILE CLEANING THE JUNKYARD BEHIND THE SHOP, HE WAS PICKING UP A PIECE OF WOOD & AN OAK PALLET. THE TWO PIECES SEPARATED & THE PALLET SWUNG DOWN & BROKE HIS FINGER BETWEEN THE TWO OBJECTS.

WHILE REPLACING A PULLEY IN GALLEY #2, THE PIPE HOLDING THE BELT BACK BROKE, PIPE FLEW, STRIKING LEFT KNEE AREA. THIS CAUSED A CONTUSION AND STRAIN. DOCTOR GAVE 4 DAYS OF LIGHT DUTY WORK.

WORKING UNDER A TRUCK FIXING THE EXHAUST SYSTEM. RUST FELL INTO RIGHT EYE.

WAS WORKING TO GET SNUB PULLEY INTO POSITION, IT HAD BECOME PINCHED UNDER THE BELT. WHEN EE REACHED IN TO GET THE PULLEY, IT MOVED TOWARDS HIM & PINCHED HIS FINGERS ON LEFT HAND. SPLINT REQUIR ED.

WHILE DIGGING OUT #3 SECONDARY CRUSHER, WENT TO THROW A ROCK AND HIT THE SIDE OF THE CRUSHER, PINCHING HIS FINGER.

WHILE BACKING OUT OF A HOPPER, STRUCK LOWER BACK ON CORNER OF THE CHUTE.

WHILE HEADING DOWN STEPS TO RETRIEVE TOOLS, TRIPPED ON GRATING & FELL DOWN THREE GRATED STEPS. RECEIVED EYEBROW LACERATION FROM HIS GLASSES STRIKING HIS FACE. RIGHT EYEBROW. R. WRIST SORE. *ST ITCHES REQUIRED.*

CUTTING A SKIRT RUBBER WITH A STANLEY KNIFE. WAS PULLING THE KNIFE TOWARDS HIS RIGHT LEG. KNIFE WENT THRU RUBBER AND THEN STRUCK HIS RIGHT LEG.

WAS CLEANING OFF BOLTS AT THE END OF DISCHARGE END OF THE EANGLE SCREW. GUST OF WIND BLEW SOME DIRT INTO HIS EYE.

CLEANING ORT INSIDE OF REDUCER WHEN HE SLICED OPEN THE RIGHT INDEX FINGER ON INNER SEAL.

WHILE CHANGING SCREEN PANELS IN S1 AT DRY MILL, HE WAS IN THE MIDDLE DECK REMOVING A SCREEN PANEL WHEN HE HIT THE TOP OF HIS HEAD, CAUSING A SMALL LACERATION.

EE WAS TAKING A PLATE STEEL OFF THE BACK OF A TRUCK WHEN HE HURT HIS RIGHT BICEP-STRAIN.

WHILE GRINDING ON THE SHAFT OF C-22 HEAD PULLEY, SOMETHING GOT INTO LEFT EYE.

WHILE CLEANING ROLLERS OFF WHILE BELT WAS RUNNING, HAND WENT BETWEEN THE BELT AND ROLLER.

WHILE CUTTING A PLATE OUT OF A HOPPER, PLATE POPPED UP & STRUCK HIM IN THE JAW & LIP AREA

WHILE CHANGING HAMMERS IN CRUSHER DID NOT HAVE AFIRM GRIP ON WRENCH, IT SLIPPED OUT AND HIT KNUCKLE OF MIDDLE FINGER RIGHT HAND

WHILE CLIMBING OFF A LOADER, SLIPPED OFF THE LADDER AND LANDED ON A SMALL ROCK TWISTING ANKLE. X-RAYS REQUIRED PLEASE NOTE: THIS IS NOT A LAFARGE EMPLOYEE. HE WORKS FOR AN OUTSIDE CONTRACTOR G

WHILE GETTING OUT OF A TRUCK, STEPPED ON A SMALL ROCK, TWISTING HIS RIGHT ANKLE.

WHILE DIGGING OUT C-2 STACKER. SLIPPED ON WET CATWALK. TWISTED LEFT KNEE. EE DID NOT NOTIFY US HE WENT TO A PHYSICIAN. WE RECEIVED PAPERWORK FROM PHYSICIAN ON 6-22-98 AND WE ARE REPORTING THIS NOW. X-RAYS POSITIVE.

HAMMMERING ON THE SIDE OF THE HOPPER TO FREE UP THE STONE. FELL OFF THE SIDE OF THE FEEDER ONTO THE FLOOR, INJURING LEFT KNEE.

HE SUFFERED AN APPARENT HEART ATTACK.

WAS CLIMBING BACK INTO HIS LOADER PLATFORM WHEN HE HIT HIS HEAD ON THE MIRROR. STITCHES REQUIRED

WHILE CHECKING PUMPS, STEPPED OUT OF HIS TRUCK & BEGAN WALKING TOWARDS PUMP & STEPPED ON UNEVEN AREA & TWISTED RIGHT FOOT.

WAS LIFTING 2-15/16 BEARING UP ONTO A SHELF, IT SLIPPED OUT OF HIS HANDS AND FALLING ONTO THE RIGHT FOOT, BEHIND STEEL TOE BOOTS HE WAS WEARING.MR. PEPON IS AN OUTSIDE CONTRACTOR-INDEPENDENT.

WHILE CUTTING A SKIRT RUBBER, WAS PULLING KNIFE TOWARDS HIMSELF. KNIFE SLIPPED AND CUT HIS RIGHTLEG. NOTE: LOST TIME ACCIDENT.

WHILE LOADING ROLLERS ON A CONVEYOR, PINCHED LEFT RING FINGER BETWEEN THE ROLLER AND CONVEYOR.

WELDING ON GRIZZLY BARS. CHIPPING OFF AREA WHERE WELDING. PIECE OF WELDING WENT INTO RIGHT EYE. WAS NOT WEARING SAFETY GLASSES.

WAS CLEANING OFF SCREEN DECKS. WAS DONE CLEANING OFF SCREEN AND WENT TO PUT THE SKIRT RUBBER BACK DOWN AND IT FLOPPED ON HIM AND GOT MUD IN LEFT EYE.

EE WAS BENDING OVER AND FELT PAIN IN HIS LOWER BACK. THE PAIN GOT EXTREMELY WORSE HE WENT TO THE HOSPITAL AND WAS ADMITTED.

USING A PRY BAR TO TIGHTEN CRUSHER BOLTS. THE PRY BAR SLIPPED AND EMP FELL AGAINST THE HANDRAIL SKINNING RIGHT ELBOW AREA.

WORKING AT WET MILL SCREENS. CLIMBED UP ON SCREEN TO TIE A TARP TO BLOCK WIND. LOST FOOTING AND FELL ON HAND RAIL. HE LANDED ON UNDERSIDE OF HIS LEFT SHOULDER. NOTE: SLING WAS REQUIRED & PAIN PRESCRIPTION.

WAS PUTTING HYDRAULIC WEDGE IN 2 CRUSHER DOOR. HE GRABED THE WEDGE WHEN IT WAS MOVING AND SMASHED HIS LEFT HAND POINT FINGER TIP.

WAS CUTTING RUBBER BELTING FOR SKIRT RUBBER. HE WAS CUTTING THROUGH RUBBER BELTING WITH UTILITY KNIFE AND JAMMED KNIFE INTO HIS UPPER RIGHT LEG CAUSING LACERATION.

DIGGING OUT P2 TAIL PULLEY, SLIPPED ON ICE AND SNOW WHILE CLIMBING UNDER P2 TAIL. PAIN IN LOWER BACK AND RIGHT LEG.

WHILE SHOVELING OFF DECK AT DRY MILL, SOMTHING FLEW INTO LEFT EYE. NOTE THIS IS A LOST TIME ACCIDENT. IT DID NOT BECOME LOST TIME TIL 12-9-95.

WAS CLEANING OUT GRIZZLY CHUTE, HE WAS POKING OUT THE CHUTE WITH A BAR. ONE OF HIS FEET SLIPPED OFF THE GRIZZLY BAR, TWISTING HIS BACK.

TRYING TO REMOVE A ROCK FROM C-3 TAKEUP PULLEY, W HILE THE BELT WAS STILL RUNNING. USING LONG HANDLE SHOVEL TO POKE ROCK. AS HE TRIED TO POKE THE ROCK OUT OF THE RUNNING BELT, WITH SHOVEL, T HE BELT CAUGHT THE SHOVEL PULLING EE INTO THE PULLEY.

TAKING ROCK THAT WAS STUCK IN TAIL PULLEY. WAS USING HAMMER TO BREAK THE ROCK & WHEN IT BROKE A PIECE OF THE ROCK FELL AND HIT THE HAMMER HANDLE AND PINCHED L. THUMB AGAINST THE FRAME OF THE C ONVEYOR.

REPAIRS TO 450 CASE DOZER. DOZER BELONGS TO OUTSIDE CONTRACTOR BOOTHHILL. INSTALLING WEAR PLATES ON BLADE OF DOZER. BLADE SLIPPED OFF BLOCKING AND FELL ON RIGHT FOOT.

WAS REMOVING THE BOARDS USED FOR CHANGING THE ROTOR IN SECONDARY CRUSHER. WHEN HE STARTED TO REMOVE THE BOARD OUT, THE ONE END FELL INTO THE HOPPER, PINCHING HIS RT THUMB BETWEEN THE BOARD AND CRUSHER.

WHILE PICKING UP 992C LOADER BUCKET PIN, PIN SLIPPED AND HIT THUMB - LEFT.

WHILE PUTTING SKIRT RUBBER ON SHUTTLE BELT AND USING A SOCKET, PIECE OF METAL BROKE OFF SOCKET & LODGED IN EYE.

WHILE REPLACING V BELTS ON #2 PRIMARY DRIVE MOTOR, V BELTS WERE PLACED ON SHIEVE & HE WAS HELPING TO ROLL SHIEVE AROUND TO EVEN UP THE SLACK ON THE 2-5 BAND V BELT SET. THE TIPS OF THE GLOVE ON THE LEFT HAND CAUGHT IN THE BELT & PULLED THEFINGERS INTO THE SHIEVE & V BELT PINCH POINT.

WHILE WELDING GUARD BRACKET WELDING ROD STUCK TO BRACKET WHEN TRYING TO BREAK OFF THE ROD IT BROKWE & PUNCTURED LEFT ARM

WAS WALKING PAST OPEN DOOR ON TRUCK,INJURED STRUCK HIS HAND (RIGHT PINKY FINGER) ON TRUCK DOOR,SPLITTING OPEN KNUCKLE.

WAS CLEANING UP AT DRY MILL, AND THE BOBCT HE WAS RUNNING JERKED AHEAD CAUSING HIM TO HIT HIS HEAD ON BACK WINDOW.

WAS STANDING ON TOP OF CRUSHER V-BELTS GUARD TRYING TO PRY OPEN THE CRUSHER. THE BAR SLIPPED, LEG FELL IN BEWEEN THE GUARD & GRUSHER TWISTING KNEE & PINCHING LOWER CALF LEG.

CARRYING A COME A LONG INTO TUNNEL, WHEN COMEALONG SLIPPED OUT OF HAND, HE JERKED IT TO GET BETTER GRIP, AND HOOK HIT TOOTH.

WHILE HELPING SPLICE C-2 BELT, WAS WALKING UP THE CAT WALK WHEN HE SLIPPED ON THE ICE & FELL ON LEFT ELBOW & LEFT KNEE. HE WORKED 4/10/95 & 3.5 HR ON 4/11/95, THEN RTN TO WORK 4/17/95.

WHILE UNPLUGGING THE CRUSHER, A ROCK WAS WEDGED INBETWEEN ROTAR AND GEMINI BAR. EE WAS USING A SLEDGE HAMMER TO BREAK IT LOOSE. THE SLEDGE HAMMER HIT THE ROCK AND CAME BACK STRIKING HIM IN THE LEFT SHIN.

WAS SHUTTING HOOD ON WELDER. HOOD SLIPPED OUT OF HAND, TRIED TO CATCH THE HOOD, AND SMASHED FINGERS BETWEEN HOOD AND FRAME.

USING A TORCH TO BURN OFF BOLTS. HE WAS MOVING TO CUT OFF ANOTHER BOLT & HIS JACKET HIT THE AIR TRIGGER & THE TORCH BURNED HIS LEG [LEFT].

WAS HAMMERING CRUSHER INTO PLACE WITH SLEDGE HAMMER. THE HAMMER TWISTED, CAUSING HIS HAND TO SLIP AND HIT A BEAM, SMASHING HIS FINGERS.

WHILE TRYING TO HAMMER A WEAR PLATE IN PLACE, HE WAS GETTING HIMSELF IN POSITION AND HIT HIS SHIN ON A CROSS BEAM.

WHILE CARRYING OXYGEN TANK TO WORK TRUCK, SLIPPED ON ICE, TWISTED BACK.

WORKING ON L320 LOADER. FELL FROM ATOP LOADER. STRIKING HEAD ON THE GROUND.

WHILE SHOVELING 1 X 0 STONE, AFTER HIS SHIFT EXPERIENCED PAIN RT. ARM & SHOULDER. *THIS WAS NOT REPORTED TO EMPLOYER UNTIL 11/3/94

CUTTING TABS OPEN ON BUCKET OF CLIPS. HAND SLIPPED OFF BUCKET CUTTING RIGHT INDEX FINGER.

SHOVELING AROUND #C-14 COUNTER WEIGHT. STUMBLED WHILE SHOVELING AROUND COUNTER WEIGHT. FELL TO THE GROUND ON RIGHT SIDE AND INJURED RIGHT SHOULDER & BACK.

EE WAS DRIVING IN FRONT OF OTHER. OTHER DROVE INTO THE BACK OF EE VEHICLE. SHE HAD LOWER BACK PAIN.

WAS CLIMBING DOWN LADDER OF L320 LOADER, SLIPPED AND FELL ON RIGHT FOOT THE WRONG WAY.

INJURED WAS HELPING DIG OUT CRUSHER BY GRABBING ROCK'S OUT SIDE DOOR. EMPLOYEES INSIDE CRUSHER WERE THROWING ROCKS OUT THE DOOR. INJURED STUCK HIS HEAD INTO CRUSHER & WAS STRUCK BY A ROCK.

WHILE WALKING AROUND THE CRUSHER TO GET A CHAIN, HE WALKED INTO THE CORNER OF A PLATFORM STRIKING KNEE.

PUTTING PATCH IN CENTER DECK OF WET MILL SCREENS WHEN CLIMBING OUT TWISTED SHOULDER (L)

CHANGING HAMMERS IN ROTER FOR CRUSHER. HOLDING THE WRENCH TO LOSEN BOLTS FOR WEDGES. EE HAD HIS HAND BETWEEN THE WRENCH AND THE ROTOR, INSTEAD OF PUTTING WRENCH AGAINST THE ROTOR. INJURING RIG HT HAND.

CLIMBING OUT OF EAST SCREEN ON LADDER WHICH WAS TIED BY A ROPE. ROPE BROKE AND LADDER FELL. FELL DOWN CHUTE AND LANDED ON BELT BELOW.

PULLING CABLE OFF BACK OF YARD TRUCK WHEN HE PULLED THE CABLE OFF A SNATCH BLOCK CAME WITH IT & FELL OFF THE BACK OF THE TRUCK EE TRIED TO CATCH THE SNATCH BLOCK & IT PINCHED HIS FINGER BETWEE N IT & THE BUMPER OF THE TRUCK SPLITING THE SKINOF HIS RT LONG FINGER

WELDING IN #1 PRIMARY CRUSHER. FINISHED WELDING ON ONE HAMMER, WENT TO REMOVE WEDGE TO ROLL HAMMERS. STRUCK WEDGE WITH HAMMER TO LOOSEN. SOMETHING WENT INTO LEFT EYE. EMERGENCY ROOM MEDICAL TR EATMENT.

WHILE CHANGING HAMMERS IN CRUSHER #4 A WEDGE THAT HOLDS THE ROTOR FROM TURNING CAME LOOSE & LET THE ROTOR TURN, CAUSING THE HAMMER TO STRIKE RIGHT KNEE.

WAS TIGHTENING BOLTS ON DRY MILL SCREENS. HE WAS IN THE MIDDLE DECK TIGHTENING BOLTS WHEN SOMETHING GOT IN HSI RIGHT EYE.

ENTERING DRY MILL TOOL TRAILER, WENT TO PULL TRAILER DOOR OPEN SOMETHING PULLED IN HIS BACK.

WAS KNEELING ON THE BELT HELPING HOLD THE BELT UP SO WE COULD PUT A ROLLER BACK IN PLACE. WHEN HE STOOD UP HE GOT A SHARP PAIN IN HIS LOWER BACK.

WHILE CHIPPING AT A FRESH WELD, A WELD PIECE OGOT INTO RIGHT EYE.

WAS TIGHENING BOLTS ON OUTSIDE OF CRUSHER #4 WITH A BAR. BAR SLIPPED OUT OF HOLE & THEN EMPLOYEE LOST BALANCE & FELL BACKWARDS ONTO THE HANDRAIL, APPROX. 6 FT BELOW, STRICKING HEAD, UNDERARM/R IGHT, RIGHT SIDE OF CHEST, WAIST & HIP AREA.

WAS WELDING ON CHUTES UNDER WET MILL. WIND BLEW SAND INSIDE WELDING HELMET GETTING SAND IN LEFT EYE.

WHILE TAKING OFF CHAIN COUNTER WEIGHT, HE PINCHED HIS ARM AND LEG BETWEEN ROLLER AND BELT. THE BELT ROLLED WHEN OCUNTER WIEGHT WAS PICKED UP.

WAS LIFTING SCREEN UP FROM THE SCRRENDECK WHEN HIS FOOT COLLAPSED & HAD TO SQUAT WITH THE SCREEN CAUSING SHARP PAIN IN LEFT HEEL AREA. THIS IS A RE-INJURY FROM 1991.

WHILE LOADING CRIBBING ONTO THE BACK OF A PICKUP, ARM (RIGHT) WAS CAUGHT BETWEEN TWO OF THE CRIBBING BLOCKS CAUSING CONTUSION.

WHILE OPERATING GRADALL FORK LIFT, HE LIFTED CHAIN THAT WEIGHED 1292 LBS. AFTER LIFTING THE CHAIN INTO THE AIR, HE PROCEEDED TO BACK UP AND IN SO DOING, BACKED UP OVER A MOUND OF STONE FINES CAUSING THE MCAHINE TO UPSET. MACHINE FRAME CAUGHT AND BROKE RIGHT ANKLE.

WHEN LIFING SCREENS UP INTO 2ND DECK PANELS EE SAYS HE STRAINED HIMSELF HE DID NOT REPORT IT IMMEDIATELY HE DID NOT HAVE PAIN UNTIL THAT EVENING & THE NEXT DAY REPORTED ACCIDENT 04-21-93

WHILE USING GRINDING WHEEL, WHEEL CAME IN CONTACT WITH LEFT KNEE CAUSING LACERATION STITCHES REQUIRED.

WAS USING HAND DRILL TO PUT HOLES INTO METAL ELECTRICAL PANELS, ON 2/4/93. WINDY WEATHER CONDITIONS. THE FOLLOWING DAY, FELT DISCOMFORT & WENT TO DOCTOR & DISCOVERED METAL PIECE IN RIGHT EYE, REQUIRING REMOVAL. SAFETY GOGGLES WERE WORN.

INSTALLING WEAR PLATES IN SURGE BIN. EE TACK WELDED ONE CORNER IN PLACE, THEN PUT TENSION ON PLATE WITH CRANE TO LIFT OTHER CORNER UP. LOWER CORNER WAS HANGING UP. HE WENT TO TRIM THIS WITH A TORCH, THE TACK WELD BROKE AND PLATE SWUNG OUT, PINNING HIM TO THE OTHER SIDE OF THE HOPPER.

WHILE DRAINING WET PLANT CLASSIFYING TANKS. WALKING UP TO TANKS,SLIPPED AND CAUGHT HIMSELF ON HANDRAIL.(LATER WHEN DOING SOME SHOVELING ON DOCK BELT FELT PAIN IN BACK.)

CLIMBING UP TO OPERATE 992C CAT LOADER.WHEN HE GOT TO THE TOP OF THE LADDER AND ON THE LANDING HE SLIPPED AND FELL INTO THE HAND RAIL WITH HIS UPPER RIGHT ARM CAUSING PAIN.HE SLIPPED ON FUEL T

WAS INJURED WHEN HE USED HIS CIGARETTE LIGHTER TO LOOK INTO TOOL BOX AT NIGHT. CAN OF WD40 HAD BEEN KNOCKED OVER AND WAS SPRAYING INTO THE BAX CAUSING A FLSH OF FIRE WHEN IT WAS IGNITED BY TH E LIGHTER.

USING AIR POWER GRINDER REPAIRING SPLICE ON 3 GALLEY BELT. DID NOT FEEL ANYTHING BUT MAN WORKING WITH HIM NOTICED RED SPOT IN EYE. AFTER THAT EYE BECAME SORE AND SWOLLEN.

WHILE TRYING TO DISLODGE A ROCK IN TAIL PULLEY ON CRUSHER FEEDER BELT, THE HEAVY STEEL BAR SLIPPED AND WHILE TRYING TO HANG ONTO THE BAR, IT STRAINED RIGHT SHOULDER.

STEPPING ACROSS BOARD PLACED OVER WATER PUDDLE. SLIPPED ON WET BOARD AND FELT PAIN IN LOWER BACK.

EMPLOYEE WAS TRYING TO DISLODGE LARGE ROCK FROM PRIMARY CRUSHER WHILE POKING AT IT A PIECE OF STONE HIT RT EYE CAUSING ABRASION

CUTTING OLD BELTING FOR CRUSHER SIDE DOOR. STANLEY KNIFE UTILITY SLIPPED OUT OF CUT GROOVE AND CUT RIGHT LEG ABOVE KNEE.

EMPLOYEE WAS PREPARING TO MOVE LADDER TO NEW LOCATION. HE UNTIED THE LADDER FROM THE CONVEYOR FRAME AND BEGAN TO DESCEND LADDER. THE WIND BLEW THE LADDER OVER BEFORE EMPLOYEE COULD DESCEND MOR E THAN ONE OR TWO RUNGS.

LOADER JACKED UP ON WOODEN BLOCKS AND STEEL STAND.BLOCKS CRACKED AND SPLIT,STEEL PLATE SLICED FINGERS AND THUMB OF RIGHT HAND.

WHILE HOEING OUT UNDER THE TAIL END OF CONVEYOR BELT, HURT LOWER BACK WHEN HE STOOD UP.

WAS CARRYING CHANNEL IRON OUT OF 6-B TUNNEL SLIPPED CAUSING CHANNEL IRON TO HIT HIM IN RT SIDE LOST TIME

WHILE OPERATING A FRONT END LOADER HE WAS DIGGING INTO A STOCKPILE GETTING A BUCKET OF STONE UPON DOING THIS HE FELT PAIN IN HIS BACK SHOULDER AND NUMBNESS IN R ARM

WAS CHANGING A TIRE ON THE TIRE CHANGING MACHINE.WHILE PUTTING TIRE ON THE RIM THE BAR SLIPPED HITTING RIGHT LITTLE FINGER.

ANOTHERR MAN WAS USING AIR HOSE ON DECK ABOVE EMPL AIR BLEW DUST INTO AIR & INTO EMPLS EYES.

WALKING FROM OLD PRIMARY TO LUNCH ROOM SLIPPED ON ICE AND FELL HURT BACK AND HEAD

WHILE SERVICING #63 CAT LOADER STEPPING OFF OF MACHINE STEPPED ON RUBBER FLAP THEN FELL TO THE GROUND APPROX 6 1/2'

OPERATING A LOADER WHEN A ROCK FELL OUT OF BUCKET AND LOADER RAN OVER IT CAUSING LOADER TO BOUNCE CAUSING LOW BACK PAIN

WHILE PULLING HEAVEY HAND SPLITTER UPWARD FROM THE GROUND TO THE TOP OF THE ROCK TO BE SPLIT RECEIVED UPPER STERNUM PAIN

PICKING UP TROUGHING ROLLERS TO BE PLACED ON A PICK-UP TRUCK AND FELT PAIN IN GROIN.

WHILE INSTALLING SIDE PLATES ON 19B WASH SCREEN EMP HAD JUST HOOKED UP A COME A LONG TO PULL SIDE PANEL INTO POSITION. AS HE TURNED TO GET ANOTHER, HE SLIPPED ON F RAME WORK AND FELL

WHILE RE LINING319-B FEED CHUTE, HOOK FROM HOIST SLIPPED AND STRUCK EMPLOYEE ABOVE RIGHT EYE CAUSING LACERATION.

WHILE REMOVING 8CREEN FRAME FROM S-1 HE STEPPED ON A CORNER OF THE FRAME AND THE FRAME SLIPPED AND ROLLED ON TOP OF HIM.

WHILE STOCKING 8TEEL PLATE IN THE WELDING AREA, BUMPED KNEE ON PIECE OF STEEL.

WHILE CLIMBING 8OWN OFF OUR NEW CRUSHER, HE STEPPED OFF THE LAST STEP, HIS FOOT HIT THE GROUND, CAUSING HIM TO HURT HIS LEFT ANKLE.

I.NAME WAS GRIN8ING A CHISEL WHEN A G RINDING PARTICLE STRUCK THE BRIDGE OF HIS NOSE AND WENT ACROSS INTO HIS LEFT EYE

HE WAS PULLING 5 BEARING ON COUNTER WEIGHT SIDE OF SCREEN. HAD TO USE A JACK TRY TO FREE BEARING. IN DOING THIS JACK FELL OFF HITTING HIM IN THE RIGHT ELBOW, AND SHOULDER.

WHILE EXTRACTIN1 THE DARTA SPLITTER, THE ROCK SEPARATED AND HE FELL BETWEEN THE TWO PIECES.

WHILE HAND SPLI7TING RIP RAP (ROCK), THE OVERHANG HE WAS STANDING ON GAVE WAY, CAUSING HIM TO FALL APPROX. 11 FT.

MIXING CONCRETE3FOR POLES HE WAS PUTTING IN T HE GROUND. HE WAS PUTTING A LOT OF DOWN PRESSURE ON THE HOLES HE WAS USING TO MIX THE CONCRETE, CAUSING INJURY.

WHILE CUTTING T2E TOP OFF A PLASTIC BUCKET WITH A KNIFE, THE KNIFE CAME IN CONTACT WITH LEFT THUMB, CAUSING LACERATION SUTURE REQUIRED

WHILE PUTTING A3SHOCK ABSORBER ON A SEAT OF A EUCLID TRUCK, THE SEAT WAS PUT IN THE UP POSITION. IT FELL, AND CAUGHT THE TIP OF HIS RT INDEX FINGER.

EMPLOYEE WAS UN1LUGGING SYMONS CONE CRUSHER. HE HAD TO GET INSIDE OF THE CRUSHER TO FREE THE OBJECT. USING A COME A LONG TO MOVE THE MANTLE WHERE THE PLUG UP WAS. WHEN PLUG UP WAS FREE, THE M ANTLE MOVED AND3PINCHED THE EMPLOYEE AGAINST THE CRUSHER WALL.

EMPLOYEE CONTAC7ED POSION IVY WHILE CUTTING WEEDS ALONG TRACKS NEAR OUR MAIN OFFICE.

EMPLOYEE WAS CL3MBING DOWN LADDER AT BOOT END OF A20. A PIECE OF ANGLE IRON HE WAS USING AS A HAND HOLD GAVE WAY. HE FELL AND INJURED RT LEG AND SCRAPED HIS BACK AND LEGS.

WHILE DUMPING H3S LOAD OF STONE, A FOREIGN OBJECT FLEW INTO HIS EYE THROUGH HIS OPEN WINDOW.

EMP WAS TRYING 7O CLEAR A PLUGGED HOPPER WITH A SLEDGE HAMMER. WHILE HITTING THE HOPPER OVER HIS HEAD WITH THE HAMMER, HE STRAINED HIS BACK

WHILE CLEANING 8PINDLE WITH A RAG, EMPLOYEE PICKED UP A STEEL PARTICLE IN HIS PR. INDEX FINGER.

EMPLOYEE WAS WA5KING TO HIS CAR HE SLIPPED ON THE SNOW FELL CAUSING HIM TO BRUISE HIS LEFT LEG

EMPLOYEE ALLEDG9DLY HURT BACK WHILE RUNNING HIS COMMERCIAL LOADER HE IS REPORTING THIS ACCIDENT ON 5-26-87

WHILE CLIMBING 2FF THE CRANE HE SLIPPED ON THE TRACK OF THE CRANE CAUSING HIM TO HIT HIS LEFT KNEE

EMPLOYEE WAS TI1HTENING V-BELTS AND MOTORS, USING A HYDRAULIC JACK AND A 4X4 PLANK. IN DOING THIS, THE 4X4 PLANK SLIPPED AND HIT HIM ON THE TOP OF HIS HEAD, INJURING HIS NECK AND RIGHT SHOULD ER. 3

EMPLOYEE WAS WA8HING STONE UNDER A-2 CONVEYOR. HE WAS PULLING THE HOSE ALONG AND IN DOING SO, HE PULLED A MUSCLE IN HIS BACK.

EE AND EMPLOYEE3EE HAD ONE HOLE DRILLED AND SPLITTER IN THAT HOLD. EE WAS DRILLING ANOTHER HOLE AND EE WAS GETTING 2ND SPLITTER READY FOR HOLE BEING DRILLED EE STEPPED ON SIDE OF ROCK BEING SP LIT AND IT BROK9 OFF THROWING HIMSELF AND PULLING EE WITH DRILL OFF THE ROCK.

EMPLOYEE I NAME3AND ANOTHER I NAME WERE DRILLING & S PLITTING RIP RAP.THEY HAD ONE HOLE DRILLED AND SPLITTER IN THAT HOLE.PEDRO WAS DRILLING ANOTHER R READY FOR HOL9 BEING DRILLED.I NAME STEPPED ON SIDE OF ROCK BEING SPLIT AND IT BROKE OFF.THROWING HIMSELF & PULLING I NAME WITH DRILL OFF THE ROCK.I NAME RECEIVED NECK AND BACK INJURIES.

I.NAME AND ANOT2ER EMPL CARRYING LADDER TO STORAGE.WHILE POSITIONING LADDER I.NAME BACKED UP AND FELL OFF LEVEL THEY WERE AT ONTO ANOTHER LEVEL.8-10'.INJURED BOTH LEGS AND RIGHT KNEE BRUISES N O GUARDRAIL IN 1LACE THUS CAUSING FALL.

EMPLOYEE BACKED3THE 992 LOADER UP TO THE 11 FT LEDGE STEPPED FROM THE LOADER TO THE SHOT LEDGE, THEN FELL BETWEEN THE SHOT LEDGE AND THE UNSHOT LEDGE AND INJURED HIS LEFT LEG. ABRASIONS AND SP RAINED ANKLE. 3

EMPLOYEE WAS RETENSIONING SCREEN PANELS WITH A COME-A-LONG PROVIDED WITH THE SCREEN,WHEN HE FELL 81/2FT.BETWEEN STRUCTURE CROSS MEMBER AND SIDE OF OLD SCREEN.HE RECEIVED NUMEROUS ABRASIONS &F BUMPS ON RT. ELBOW,ARM & LEGS.

EMPLOYEE WAS CLIMBING DOWN THE LADDER OF #67 EUCKID TRUCK.HE SLIPPED ON THE LADDER AND SCRAPED AND BRUISED HIS RT.RIB CAGE AND SCRAPED RT.ELBOW.

OPENING HEAVY DOOR-APPX 500 LBS -TO TRAILER.AS HE SWUNG IT OPEN,WIND CAUGHT IT AND HE CONTINUED TO HOLD ONTO DOOR CAUSING SPRAIN TO RIGHT ARM.EXPLOSIVES TRAILER.

REBUILDING CUTTER DISCHARGE CHUTE,CUTTER CHUTE MOVED A HALF CYCLE AND SQUEEZED RIB CAGE AND SHOULDERS AGAINST SIDE OF HOPPER.RIB CAGE AND SHOULDERS SQUEEZED -PINNED.

REMOVING RADIATOR CAP FROM LOADER ESCAPING HOT LQUID BURNED LEFT FOREARM AND LEFT SIDE OF FACE.

DUST BLOWING INTO CAB OF DOZER-DOOR NOT CLOSED.FOREIGN OBJECT IN RIGHT EYE.

EMPL PULLING ON 10 TON CHAIN FALL WHILE LIFTING HEAVY OBJECT.PAINS IN STOMACH.

SLIPPED OFF THE LADDER OF 73 DUMP TRUCK AND CAUGHT HIMSELF WITH HIS LEFT ARM PULLING MUSCLE AND CAUSING STRAIN. ELBOW WAS ALSO AFFECTED.

GETTING OUT OF DUMP TRUCK, HANDLING ONTO HAND RAILING HE PINCHED HIS HAND BETWEEN THE HANDLE AND THE RAILING CONTUSION AND LACERATION TO HIS LEFT HAND

EMPLOYEE WAS SHOVELING STONE OFF MAIN DOCK BELT.IN DOING THIS, HE INJURED HIS BACK-CAUSING STRAIN.

EMPLOYEE WAS GETTING INTO A HOPPER TO TIGHTENBOLTS HE LOST HIS FOOTING ON LOOSE MATERIAL AND INJURED HIS LEFT KNEE WRENCH

EE & ANOTHER EE WERE REMOVING A LARGE ROCK ON #1 CONVEYOR. THEY WERE ROCKING & PUSHING THE ROCK ON CONVEYOR TO REMOVE IT. MR. CRAWFORD STRAINED A MUSCLE IN HIS ABDOMEN.