Amrize Wrentham Quarry Metal/Non-Metal

Employee was installing v-belts. Employee's right-hand thumb caught between v-belt and pulley and rolled over pulley until free. Employee received five (5) stitches on right-hand thumb and modified work duty.

EE used the fork lift to place a steel wear plate on an excavator bucket to be welded. The plate of steel was placed on the lip of the bucket and needed to be adjusted into place. While pushing into place by hand EE pinched his right thumb causing a laceration requiring medical attention.

Hearing Loss

While hammering a new tooth on a new shank on a 980H a piece of the tooth broke off striking him in the forearm. The metal chip penetrated the skin and lodged about 3 inches up his arm. The employee required 2 stitches and will need to return to the doctor to have the chip removed.

Employee was taking bolts out of front differental of a 988F loader. While pulling down on a breaker bar, the bar broke and hit employee on chin.

Employee failed audiometric testing. Will be retested on 5/4/2009.

Employee was standing on a spring base just peeking over the top of a side plate of a screen looking into the machine. When he started to lower himself, he hyperextended his left shoulder which then dislocated.

Employee experienced a significant threshold shift in his right ear on his annual hearing test.

While EE was grinding steel, a piece came up and under his full face shield and glasses and lodged in his right eye.

EMPLOYEE CLIMBED OUT OF THE CAB OF HIS TRUCK TO MOVE STEEL RODS THAT WERE IN THE WAY. AS HE WAS DOING THIS HE SLIPPED.

HAUL TRUCK DRIVER WAS HAULING WASH SAND TO STOPCKPILE. THERE WAS ADEQUATE BERMING, DRIVER FAILED TO INSPECT FRONT OF STOCKPILE WHERE IT HAD BEEN UNDER MINED. DRIVED BACKED UP TO BERM, THE STOC KPILE GAVE WAY. THE TRUCK WENT HALFWAY DOWN PILE THEN THE TRUCK FLIPPED OVER ONTO ITS ROOF. DRIVER WAS THROWN HALFWAY OUT THE DRIVER DOOR. IT BELIEVE HE WAS NOT WEARING HIS SEATBELT.

FOREMAN WAS WALKING DOWN STAIRWAY TO 7' CRUSHER. HE SLIPPED AND FELL ON RIGHT ELBOW CAUSING LACERATION.

EE WAS WELDING, SLAG BURNT HIS RT LOWER LEG

EE SLIPPED AND FELL OFF A PIECE OF EQUIPMENT INJURING HIS RIGHT SHOULDER AND LEG.

EE WAS WELDING, WHEN A PIECE OF SLAG GOT BEHIND WELDING SHIELD AND WNET INTO LEFT EYE.

WHILE CHECKING WIRES FOUND IN A MUCK PILE TO MAKE SURE THEY WEREN'T LIVE EE SLIPPED ON MUCK PILE LOOSING HARD HAAT AND ROCK FELL ON HEAD.

EMPLOYEE WAS INSTRUCTED TO PULL UP A ONE AND 1/2" HOSE. AS THE EMPLOYEE WAS DOING THIS HE FELT A TWINGE IN HIS GROING AREA.

CUTTING BEARING OFF SHAFT ON PRIMARY CONV, PIECEOF STEEL WENT IN EYE CUTTING GOGGLES WERE WORN.

LOADER OPERATOR WAS CLIMBING DOWN LADDER FROM A WA500 LOADER WHEN HE SLIPPED AND PULLED BACK OUT.

INJURED WAS WORKING ON A CHUTE. HE WALKED DOWN A SET OF STAIRS AND STEPPED ON A PIECE OF PIPE AT THE LANDING AND TWISTED HIS LEFT ANKLE.

DRILLING OUT BABBITT AROUND ECCENTRIC BUSHING. PIECE OF BABBITT WENT IN RIGHT EYE. SAFETY GLASSES WERE PROVIDED AND WORN.

EMPLOYEE SLIPPED ON ICE IN PARKING LOT. FELL TO GROUND. COMPLAINED OF SHORTNESS OF BREATH & SORE ELBOW. SENT EMPLOYEE TO HOSPITAL TO GET CHECKED OUT. X-RAYS SHOWED TWO (2) BROKEN RIBS & BRUISE D ELBOW.

CUT RIGHT INDEX FINGER WHILE CLEANING CRUSHER PART.

INSTALLING AXLE IN REAR END CAUGHT R INDEX FINGER BETWEEN AXLE AND FLANGE AND STUD

PUSHING CONCAVE IN WITH BAR,BAR SLIPPED CONCAVE CAME DOWN ON FINGERS.

CLEANING ROCKS OFF BOX,ROCK FELL ON FINGER REQ 5 STITCHES.

I,NAME WAS CHANGING DRILL STEELS, WHEN IT SLIPPED FROM A HEIGHT OF TWO FEET AND LANDED ON HIS FOOT. WEIGHT FO STEEL IS 100 LBS. HE WAS WEARING SAFETY SHOES. INJURED 2ND & 3RD TOES.

I.NAME WAS COMI3G DOWN A LADDER WHEN HE TURNED AROUND HE GRABBED HOLD OF A HANDRAIL A MAN WAS WORKING ON WHICH WASNT WELDED YET I.NAME FELL OFF THE PLATFORM TO THE GROUND ABOUT 10-12FT HE LAN DED ON HIS RT A9M BREAKING HIS RT WRIST