Mining Incidents

Campton Sand & Gravel C616: 24 MSHA citations Metal/Non-Metal

Pike Industries Inc · Surface
Controlled by CRH PLC
CAMPTON, Grafton County, NH  ·  Abandoned
MSHA Mine ID: 2700052

Campton Sand & Gravel C616 has $3K in proposed MSHA penalties and $59 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Campton Sand & Gravel C616.

Fatalities
0
Total incidents
12
Years on record
1986–2008
Latest incident
Aug 2008
Compliance record
MSHA citations since 2000
24
citations
4
significant & substantial
$3,176
proposed penalties
$3,117
paid to date
98% of proposed penalties paid to date, a $59 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
26
inspections on record
339
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 339 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2010-07-08.
On record since 2010.
Source: MSHA imminent-danger order records, updated weekly.

Campton Sand & Gravel C616 has $3K in proposed MSHA penalties and $59 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$59
outstanding
22 assessments are final orders; 1 contested dockets.
Of $108 in penalties contested before the Commission, $0 was upheld in final decisions.
As of the most recent assessment on 2015-03-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
18.2%
significant & substantial
4.5%
high negligence or reckless
18.2%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 95.5% moderate, 4.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 4% of citations on record
  • Vacated or withdrawn 1 · 100%
100%
Penalty reduction in decided contests
$108 proposed, $0 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2013-01-17.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2013-71M Withdrawal Barbour 2013 $108 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2011-10-13, 14 years ago
0%
of limit-tested samples over the exposure limit
16
samples
10
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz10
  • Respirable dust, <.1mg6
Show the individual readings (16)
Date Contaminant Concentration Limit Conc / limit Occupation
2011-10-13 Quartz, respirable, >1% Qtz 0.15 0.76 0.20 Front-end Loader Operator
2007-09-18 Quartz, respirable, >1% Qtz 0.18 0.4 0.45 Crusher Oper/Worker
2007-09-18 Quartz, respirable, >1% Qtz 0.19 0.35 0.54 Crusher Oper/Worker
2007-09-18 Quartz, respirable, >1% Qtz 0.33 0.84 0.39 Crusher Oper/Worker
2007-09-18 Quartz, respirable, >1% Qtz 0.2 1.1 0.18 Crusher Oper/Worker
2007-09-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-05-04 Respirable dust, <.1mg 0 Crusher Oper/Worker
2006-05-04 Respirable dust, <.1mg 0 Washer Operator
2006-05-04 Quartz, respirable, >1% Qtz 0.13 0.47 0.28 Utility Man
2002-08-28 Quartz, respirable, >1% Qtz 0.13 0.65 0.20 Crusher Oper/Worker
2002-08-28 Respirable dust, <.1mg 0 Laborer, Bullgang
2002-08-28 Respirable dust, <.1mg 0 Crusher Oper/Worker
2000-10-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2000-10-25 Quartz, respirable, >1% Qtz 0.18 0.28 0.64 Washer Operator
2000-10-25 Quartz, respirable, >1% Qtz 0.26 0.77 0.34 Crusher Oper/Worker
2000-10-25 Quartz, respirable, >1% Qtz 0.17 0.23 0.74 Utility Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Campton Sand & Gravel C616 recorded 0.00 reportable injury cases per 100 full-time workers in 2007.

Injury rate, 2007
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.30 and the all-US-mining average was 3.77 cases per 100 workers.
In New Hampshire, metal and nonmetal mining averaged 3.27 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 0.00 0.00 0.000
2004 * 9.38 0.00 0.000
2003 * 0.00 0.00 0.000
2001 * 0.00 0.00 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Campton Sand & Gravel Inc 1950 to 1986
  2. Campton Sand & Gravel 1986 to 1996
  3. Pike Industries Inc 1997 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2018 0
2017 0
2016 2
2015 3
2014 2
2013 4
2012 4
2011 6
2010 6
2009 7
2008 9
2007 11
2006 9
2005 7
2004 12
2003 10
2002 12
2001 16
2000 10
Source: MSHA quarterly employment and production, updated weekly.

Campton Sand & Gravel C616 sits in Grafton County, New Hampshire, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Grafton County, New Hampshire · Population 91,759
0.0%
Mining share of county employment
$84,021
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2018 Q4 0 0 0
2018 Q3 8 0 0 0.0
2018 Q2 0 0 0
2018 Q1 0 0 0
2017 Q2 0 0 0
2017 Q1 0 0 0
2016 Q4 26 0 0 0.0
2016 Q3 12 0 0 0.0
Show 66 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2016 Q2 16 0 0 0.0
2016 Q1 223 0 0 0.0
2015 Q4 1,427 0 0 0.0
2015 Q3 1,227 0 0 0.0
2015 Q2 782 0 0 0.0
2015 Q1 670 1 0 1492.5
2014 Q4 1,106 0 0 0.0
2014 Q3 1,277 0 0 0.0
2014 Q2 770 0 0 0.0
2014 Q1 807 0 0 0.0
2013 Q4 1,164 0 0 0.0
2013 Q3 1,983 0 0 0.0
2013 Q2 1,509 0 0 0.0
2013 Q1 804 0 0 0.0
2012 Q4 1,293 3 1 2320.2
2012 Q3 2,263 0 0 0.0
2012 Q2 1,384 0 0 0.0
2012 Q1 1,234 0 0 0.0
2011 Q4 1,859 0 0 0.0
2011 Q3 3,321 2 0 602.2
2011 Q2 1,917 0 0 0.0
2011 Q1 1,230 0 0 0.0
2010 Q4 2,267 0 0 0.0
2010 Q3 3,096 3 2 969.0
2010 Q2 2,016 0 0 0.0
2010 Q1 1,278 0 0 0.0
2009 Q4 3,113 0 0 0.0
2009 Q3 4,027 3 1 745.0
2009 Q2 1,472 0 0 0.0
2009 Q1 903 0 0 0.0
2008 Q4 4,178 0 0 0.0
2008 Q3 5,709 2 0 350.3
2008 Q2 4,123 0 0 0.0
2008 Q1 1,712 0 0 0.0
2007 Q4 4,643 0 0 0.0
2007 Q3 6,976 4 0 573.4
2007 Q2 5,513 0 0 0.0
2007 Q1 2,869 0 0 0.0
2006 Q4 5,378 0 0 0.0
2006 Q3 5,518 0 0 0.0
2006 Q2 5,960 2 0 335.6
2006 Q1 2,954 0 0 0.0
2005 Q4 4,723 0 0 0.0
2005 Q3 6,111 0 0 0.0
2005 Q2 5,017 0 0 0.0
2005 Q1 2,259 0 0 0.0
2004 Q4 4,148 0 0 0.0
2004 Q3 6,431 0 0 0.0
2004 Q2 7,271 1 0 137.5
2004 Q1 3,475 0 0 0.0
2003 Q4 4,713 0 0 0.0
2003 Q3 4,794 0 0 0.0
2003 Q2 11,397 0 0 0.0
2003 Q1 3,532 0 0 0.0
2002 Q4 5,944 0 0 0.0
2002 Q3 3,140 1 0 318.5
2002 Q2 8,351 0 0 0.0
2002 Q1 1,872 0 0 0.0
2001 Q4 6,633 0 0 0.0
2001 Q3 7,663 0 0 0.0
2001 Q2 7,890 0 0 0.0
2001 Q1 5,020 0 0 0.0
2000 Q4 5,567 1 0 179.6
2000 Q3 6,487 0 0 0.0
2000 Q2 6,325 0 0 0.0
2000 Q1 2,725 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

12 on file

2008 · 1 incident

2004 · 1 incident

June 16, 2004 NH · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Pike Industries Inc · Over-exertion (Not Elsewhere Classified)

Employee states that the swivel knob on the steering wheel has caused pressure to palm

1998 · 1 incident

December 30, 1998 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Pike Industries Inc · Fall to the walkway or working surface

WHILE WALKING IN YARD TO THE LOADER, HE SLIPPED AND FELL ON HIS SIDE DUE TO SNOW AND ICE.

1990 · 1 incident

October 8, 1990 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Campton Sand & Gravel · Struck by... (Not Elsewhere Classified)

HE WAS WORKING ON WASH PLANT-HELPING TO REPAIR PLATES ON MATERIALS BIN WHEN HE STRUCK HIS LEFT INDEX FINGER WITH THE HAMMER HE WAS USING.

1989 · 3 incidents

July 11, 1989 NH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Campton Sand & Gravel · Fall from scaffolds, walkways, platforms

SLIPPED ON CAT WALK.

January 26, 1989 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Campton Sand & Gravel · Fall on save level, (Not Elsewhere Classified)

SLIPPED ON WET CONVEYOR BELT.

January 5, 1989 NH · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDTOOLS (NONPOWERED)
Campton Sand & Gravel · Struck by flying object

HAMMERING ON PIECE OF STEEL WITH HAMMER,GOT SLIVER OF STEEL IN LEFT HAND.

1987 · 4 incidents

October 27, 1987 NH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech OTHER
Campton Sand & Gravel · Inhalation of radiations, caustics, toxic and noxious substances

THIS WAS CAUSED3FROM THE FUMES COMING FROM PIKE S DRUM PLANT DOWN BACK. THEY DID NOT HAVE ENOUGH TRUCKS TO KEEP THE PLANT RUNNNG STEADY, SO WHEN THEY FIRED UP THE PLANT, THE FUMES CAME UP FORM XX FROM THE PLA3T. THE WIND WAS BLWOING FROM THE SOUTH AND THE FUMES FROM THE UNBURNED FUEL BURNED HIS THROAT. THE PIKE PLANT IS NOW CLOSED FOR THE SEASON.

July 13, 1987 NH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Campton Sand & Gravel · Caught in, under or between a moving and a stationary object

PUTTING DRIVE B9LTS ON SHEVES AND CAUGHT FINGERS BETWEEN BELTS AND SHEVE. THE BELT ROLLED BACK.

June 5, 1987 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Campton Sand & Gravel · Fall onto or against objects

LOADING CULVERT3PIPE AND TRIPPED FELL OVER COLLARS HURTING RIGHT HIP.

April 13, 1987 NH · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
Campton Sand & Gravel · Fall onto or against objects

CLIMBING OUT OF3THE SCREEN DECK OF THE WASH PLANT, SLIPPED AND FELL AGAINST THE EDGE OF THE DECK.

1986 · 1 incident

April 21, 1986 NH · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Campton Sand & Gravel Inc · Fall to lower level, (Not Elsewhere Classified)

WAS PUTTING NEW3BOLTS IN 5/16" SCREEN AND WHEN COMING BACK OUT, HE SLIPPED ON WET STEEL AND FELL INTO CHUTE HEAD FIRST.